/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_TIME_H
#define _LINUX_TIME_H

# include <linux/cache.h>
# include <linux/seqlock.h>
# include <linux/math64.h>
# include <linux/time64.h>

extern struct timezone sys_tz;

int get_timespec64(struct timespec64 *ts,
		const struct timespec __user *uts);
int put_timespec64(const struct timespec64 *ts,
		struct timespec __user *uts);
int get_itimerspec64(struct itimerspec64 *it,
			const struct itimerspec __user *uit);
int put_itimerspec64(const struct itimerspec64 *it,
			struct itimerspec __user *uit);

#define TIME_T_MAX	(time_t)((1UL << ((sizeof(time_t) << 3) - 1)) - 1)

static inline int timespec_equal(const struct timespec *a,
                                 const struct timespec *b)
{
	return (a->tv_sec == b->tv_sec) && (a->tv_nsec == b->tv_nsec);
}

/*
 * lhs < rhs:  return <0
 * lhs == rhs: return 0
 * lhs > rhs:  return >0
 */
static inline int timespec_compare(const struct timespec *lhs, const struct timespec *rhs)
{
	if (lhs->tv_sec < rhs->tv_sec)
		return -1;
	if (lhs->tv_sec > rhs->tv_sec)
		return 1;
	return lhs->tv_nsec - rhs->tv_nsec;
}

static inline int timeval_compare(const struct timeval *lhs, const struct timeval *rhs)
{
	if (lhs->tv_sec < rhs->tv_sec)
		return -1;
	if (lhs->tv_sec > rhs->tv_sec)
		return 1;
	return lhs->tv_usec - rhs->tv_usec;
}

extern time64_t mktime64(const unsigned int year, const unsigned int mon,
			const unsigned int day, const unsigned int hour,
			const unsigned int min, const unsigned int sec);

/**
 * Deprecated. Use mktime64().
 */
static inline unsigned long mktime(const unsigned int year,
			const unsigned int mon, const unsigned int day,
			const unsigned int hour, const unsigned int min,
			const unsigned int sec)
{
	return mktime64(year, mon, day, hour, min, sec);
}

extern void set_normalized_timespec(struct timespec *ts, time_t sec, s64 nsec);

/*
 * timespec_add_safe assumes both values are positive and checks
 * for overflow. It will return TIME_T_MAX if the reutrn would be
 * smaller then either of the arguments.
 */
extern struct timespec timespec_add_safe(const struct timespec lhs,
					 const struct timespec rhs);


static inline struct timespec timespec_add(struct timespec lhs,
						struct timespec rhs)
{
	struct timespec ts_delta;
	set_normalized_timespec(&ts_delta, lhs.tv_sec + rhs.tv_sec,
				lhs.tv_nsec + rhs.tv_nsec);
	return ts_delta;
}

/*
 * sub = lhs - rhs, in normalized form
 */
static inline struct timespec timespec_sub(struct timespec lhs,
						struct timespec rhs)
{
	struct timespec ts_delta;
	set_normalized_timespec(&ts_delta, lhs.tv_sec - rhs.tv_sec,
				lhs.tv_nsec - rhs.tv_nsec);
	return ts_delta;
}

/*
 * Returns true if the timespec is norm, false if denorm:
 */
static inline bool timespec_valid(const struct timespec *ts)
{
	/* Dates before 1970 are bogus */
	if (ts->tv_sec < 0)
		return false;
	/* Can't have more nanoseconds then a second */
	if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC)
		return false;
	return true;
}

static inline bool timespec_valid_strict(const struct timespec *ts)
{
	if (!timespec_valid(ts))
		return false;
	/* Disallow values that could overflow ktime_t */
	if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX)
		return false;
	return true;
}

static inline bool timeval_valid(const struct timeval *tv)
{
	/* Dates before 1970 are bogus */
	if (tv->tv_sec < 0)
		return false;

	/* Can't have more microseconds then a second */
	if (tv->tv_usec < 0 || tv->tv_usec >= USEC_PER_SEC)
		return false;

	return true;
}

extern struct timespec timespec_trunc(struct timespec t, unsigned gran);

/*
 * Validates if a timespec/timeval used to inject a time offset is valid.
 * Offsets can be postive or negative. The value of the timeval/timespec
 * is the sum of its fields, but *NOTE*: the field tv_usec/tv_nsec must
 * always be non-negative.
 */
static inline bool timeval_inject_offset_valid(const struct timeval *tv)
{
	/* We don't check the tv_sec as it can be positive or negative */

	/* Can't have more microseconds then a second */
	if (tv->tv_usec < 0 || tv->tv_usec >= USEC_PER_SEC)
		return false;
	return true;
}

static inline bool timespec_inject_offset_valid(const struct timespec *ts)
{
	/* We don't check the tv_sec as it can be positive or negative */

	/* Can't have more nanoseconds then a second */
	if (ts->tv_nsec < 0 || ts->tv_nsec >= NSEC_PER_SEC)
		return false;
	return true;
}

/* Some architectures do not supply their own clocksource.
 * This is mainly the case in architectures that get their
 * inter-tick times by reading the counter on their interval
 * timer. Since these timers wrap every tick, they're not really
 * useful as clocksources. Wrapping them to act like one is possible
 * but not very efficient. So we provide a callout these arches
 * can implement for use with the jiffies clocksource to provide
 * finer then tick granular time.
 */
#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
extern u32 (*arch_gettimeoffset)(void);
#endif

struct itimerval;
extern int do_setitimer(int which, struct itimerval *value,
			struct itimerval *ovalue);
extern int do_getitimer(int which, struct itimerval *value);

extern long do_utimes(int dfd, const char __user *filename, struct timespec64 *times, int flags);

/*
 * Similar to the struct tm in userspace <time.h>, but it needs to be here so
 * that the kernel source is self contained.
 */
struct tm {
	/*
	 * the number of seconds after the minute, normally in the range
	 * 0 to 59, but can be up to 60 to allow for leap seconds
	 */
	int tm_sec;
	/* the number of minutes after the hour, in the range 0 to 59*/
	int tm_min;
	/* the number of hours past midnight, in the range 0 to 23 */
	int tm_hour;
	/* the day of the month, in the range 1 to 31 */
	int tm_mday;
	/* the number of months since January, in the range 0 to 11 */
	int tm_mon;
	/* the number of years since 1900 */
	long tm_year;
	/* the number of days since Sunday, in the range 0 to 6 */
	int tm_wday;
	/* the number of days since January 1, in the range 0 to 365 */
	int tm_yday;
};

void time64_to_tm(time64_t totalsecs, int offset, struct tm *result);

/**
 * time_to_tm - converts the calendar time to local broken-down time
 *
 * @totalsecs	the number of seconds elapsed since 00:00:00 on January 1, 1970,
 *		Coordinated Universal Time (UTC).
 * @offset	offset seconds adding to totalsecs.
 * @result	pointer to struct tm variable to receive broken-down time
 */
static inline void time_to_tm(time_t totalsecs, int offset, struct tm *result)
{
	time64_to_tm(totalsecs, offset, result);
}

/**
 * timespec_to_ns - Convert timespec to nanoseconds
 * @ts:		pointer to the timespec variable to be converted
 *
 * Returns the scalar nanosecond representation of the timespec
 * parameter.
 */
static inline s64 timespec_to_ns(const struct timespec *ts)
{
	return ((s64) ts->tv_sec * NSEC_PER_SEC) + ts->tv_nsec;
}

/**
 * timeval_to_ns - Convert timeval to nanoseconds
 * @ts:		pointer to the timeval variable to be converted
 *
 * Returns the scalar nanosecond representation of the timeval
 * parameter.
 */
static inline s64 timeval_to_ns(const struct timeval *tv)
{
	return ((s64) tv->tv_sec * NSEC_PER_SEC) +
		tv->tv_usec * NSEC_PER_USEC;
}

/**
 * ns_to_timespec - Convert nanoseconds to timespec
 * @nsec:	the nanoseconds value to be converted
 *
 * Returns the timespec representation of the nsec parameter.
 */
extern struct timespec ns_to_timespec(const s64 nsec);

/**
 * ns_to_timeval - Convert nanoseconds to timeval
 * @nsec:	the nanoseconds value to be converted
 *
 * Returns the timeval representation of the nsec parameter.
 */
extern struct timeval ns_to_timeval(const s64 nsec);

/**
 * timespec_add_ns - Adds nanoseconds to a timespec
 * @a:		pointer to timespec to be incremented
 * @ns:		unsigned nanoseconds value to be added
 *
 * This must always be inlined because its used from the x86-64 vdso,
 * which cannot call other kernel functions.
 */
static __always_inline void timespec_add_ns(struct timespec *a, u64 ns)
{
	a->tv_sec += __iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns);
	a->tv_nsec = ns;
}

static inline bool itimerspec64_valid(const struct itimerspec64 *its)
{
	if (!timespec64_valid(&(its->it_interval)) ||
		!timespec64_valid(&(its->it_value)))
		return false;

	return true;
}

/**
 * time_after32 - compare two 32-bit relative times
 * @a:	the time which may be after @b
 * @b:	the time which may be before @a
 *
 * time_after32(a, b) returns true if the time @a is after time @b.
 * time_before32(b, a) returns true if the time @b is before time @a.
 *
 * Similar to time_after(), compare two 32-bit timestamps for relative
 * times.  This is useful for comparing 32-bit seconds values that can't
 * be converted to 64-bit values (e.g. due to disk format or wire protocol
 * issues) when it is known that the times are less than 68 years apart.
 */
#define time_after32(a, b)	((s32)((u32)(b) - (u32)(a)) < 0)
#define time_before32(b, a)	time_after32(a, b)
#endif