Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 | /*
* Copyright (C) 2010 ST-Ericsson AB
* Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
*
* Based on omap2430.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/usb/musb-ux500.h>
#include "musb_core.h"
static const struct musb_hdrc_config ux500_musb_hdrc_config = {
.multipoint = true,
.dyn_fifo = true,
.num_eps = 16,
.ram_bits = 16,
};
struct ux500_glue {
struct device *dev;
struct platform_device *musb;
struct clk *clk;
};
#define glue_to_musb(g) platform_get_drvdata(g->musb)
static void ux500_musb_set_vbus(struct musb *musb, int is_on)
{
u8 devctl;
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
/* HDRC controls CPEN, but beware current surges during device
* connect. They can trigger transient overcurrent conditions
* that must be ignored.
*/
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (is_on) {
if (musb->xceiv->otg->state == OTG_STATE_A_IDLE) {
/* start the session */
devctl |= MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
/*
* Wait for the musb to set as A device to enable the
* VBUS
*/
while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
if (time_after(jiffies, timeout)) {
dev_err(musb->controller,
"configured as A device timeout");
break;
}
}
} else {
musb->is_active = 1;
musb->xceiv->otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
MUSB_HST_MODE(musb);
}
} else {
musb->is_active = 0;
/* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and jumping
* right to B_IDLE...
*/
musb->xceiv->otg->default_a = 0;
devctl &= ~MUSB_DEVCTL_SESSION;
MUSB_DEV_MODE(musb);
}
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
/*
* Devctl values will be updated after vbus goes below
* session_valid. The time taken depends on the capacitance
* on VBUS line. The max discharge time can be upto 1 sec
* as per the spec. Typically on our platform, it is 200ms
*/
if (!is_on)
mdelay(200);
dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
usb_otg_state_string(musb->xceiv->otg->state),
musb_readb(musb->mregs, MUSB_DEVCTL));
}
static int musb_otg_notifications(struct notifier_block *nb,
unsigned long event, void *unused)
{
struct musb *musb = container_of(nb, struct musb, nb);
dev_dbg(musb->controller, "musb_otg_notifications %ld %s\n",
event, usb_otg_state_string(musb->xceiv->otg->state));
switch (event) {
case UX500_MUSB_ID:
dev_dbg(musb->controller, "ID GND\n");
ux500_musb_set_vbus(musb, 1);
break;
case UX500_MUSB_VBUS:
dev_dbg(musb->controller, "VBUS Connect\n");
break;
case UX500_MUSB_NONE:
dev_dbg(musb->controller, "VBUS Disconnect\n");
if (is_host_active(musb))
ux500_musb_set_vbus(musb, 0);
else
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
break;
default:
dev_dbg(musb->controller, "ID float\n");
return NOTIFY_DONE;
}
return NOTIFY_OK;
}
static irqreturn_t ux500_musb_interrupt(int irq, void *__hci)
{
unsigned long flags;
irqreturn_t retval = IRQ_NONE;
struct musb *musb = __hci;
spin_lock_irqsave(&musb->lock, flags);
musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
if (musb->int_usb || musb->int_tx || musb->int_rx)
retval = musb_interrupt(musb);
spin_unlock_irqrestore(&musb->lock, flags);
return retval;
}
static int ux500_musb_init(struct musb *musb)
{
int status;
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv)) {
pr_err("HS USB OTG: no transceiver configured\n");
return -EPROBE_DEFER;
}
musb->nb.notifier_call = musb_otg_notifications;
status = usb_register_notifier(musb->xceiv, &musb->nb);
if (status < 0) {
dev_dbg(musb->controller, "notification register failed\n");
return status;
}
musb->isr = ux500_musb_interrupt;
return 0;
}
static int ux500_musb_exit(struct musb *musb)
{
usb_unregister_notifier(musb->xceiv, &musb->nb);
usb_put_phy(musb->xceiv);
return 0;
}
static const struct musb_platform_ops ux500_ops = {
.quirks = MUSB_DMA_UX500 | MUSB_INDEXED_EP,
#ifdef CONFIG_USB_UX500_DMA
.dma_init = ux500_dma_controller_create,
.dma_exit = ux500_dma_controller_destroy,
#endif
.init = ux500_musb_init,
.exit = ux500_musb_exit,
.fifo_mode = 5,
.set_vbus = ux500_musb_set_vbus,
};
static struct musb_hdrc_platform_data *
ux500_of_probe(struct platform_device *pdev, struct device_node *np)
{
struct musb_hdrc_platform_data *pdata;
const char *mode;
int strlen;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return NULL;
mode = of_get_property(np, "dr_mode", &strlen);
if (!mode) {
dev_err(&pdev->dev, "No 'dr_mode' property found\n");
return NULL;
}
if (strlen > 0) {
if (!strcmp(mode, "host"))
pdata->mode = MUSB_HOST;
if (!strcmp(mode, "otg"))
pdata->mode = MUSB_OTG;
if (!strcmp(mode, "peripheral"))
pdata->mode = MUSB_PERIPHERAL;
}
return pdata;
}
static int ux500_probe(struct platform_device *pdev)
{
struct resource musb_resources[2];
struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct device_node *np = pdev->dev.of_node;
struct platform_device *musb;
struct ux500_glue *glue;
struct clk *clk;
int ret = -ENOMEM;
if (!pdata) {
if (np) {
pdata = ux500_of_probe(pdev, np);
if (!pdata)
goto err0;
pdev->dev.platform_data = pdata;
} else {
dev_err(&pdev->dev, "no pdata or device tree found\n");
goto err0;
}
}
glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
if (!glue)
goto err0;
musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
if (!musb) {
dev_err(&pdev->dev, "failed to allocate musb device\n");
goto err0;
}
clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
ret = PTR_ERR(clk);
goto err1;
}
ret = clk_prepare_enable(clk);
if (ret) {
dev_err(&pdev->dev, "failed to enable clock\n");
goto err1;
}
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &pdev->dev.coherent_dma_mask;
musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask;
glue->dev = &pdev->dev;
glue->musb = musb;
glue->clk = clk;
pdata->platform_ops = &ux500_ops;
pdata->config = &ux500_musb_hdrc_config;
platform_set_drvdata(pdev, glue);
memset(musb_resources, 0x00, sizeof(*musb_resources) *
ARRAY_SIZE(musb_resources));
musb_resources[0].name = pdev->resource[0].name;
musb_resources[0].start = pdev->resource[0].start;
musb_resources[0].end = pdev->resource[0].end;
musb_resources[0].flags = pdev->resource[0].flags;
musb_resources[1].name = pdev->resource[1].name;
musb_resources[1].start = pdev->resource[1].start;
musb_resources[1].end = pdev->resource[1].end;
musb_resources[1].flags = pdev->resource[1].flags;
ret = platform_device_add_resources(musb, musb_resources,
ARRAY_SIZE(musb_resources));
if (ret) {
dev_err(&pdev->dev, "failed to add resources\n");
goto err2;
}
ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
if (ret) {
dev_err(&pdev->dev, "failed to add platform_data\n");
goto err2;
}
ret = platform_device_add(musb);
if (ret) {
dev_err(&pdev->dev, "failed to register musb device\n");
goto err2;
}
return 0;
err2:
clk_disable_unprepare(clk);
err1:
platform_device_put(musb);
err0:
return ret;
}
static int ux500_remove(struct platform_device *pdev)
{
struct ux500_glue *glue = platform_get_drvdata(pdev);
platform_device_unregister(glue->musb);
clk_disable_unprepare(glue->clk);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int ux500_suspend(struct device *dev)
{
struct ux500_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
if (musb)
usb_phy_set_suspend(musb->xceiv, 1);
clk_disable_unprepare(glue->clk);
return 0;
}
static int ux500_resume(struct device *dev)
{
struct ux500_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
int ret;
ret = clk_prepare_enable(glue->clk);
if (ret) {
dev_err(dev, "failed to enable clock\n");
return ret;
}
if (musb)
usb_phy_set_suspend(musb->xceiv, 0);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(ux500_pm_ops, ux500_suspend, ux500_resume);
static const struct of_device_id ux500_match[] = {
{ .compatible = "stericsson,db8500-musb", },
{}
};
MODULE_DEVICE_TABLE(of, ux500_match);
static struct platform_driver ux500_driver = {
.probe = ux500_probe,
.remove = ux500_remove,
.driver = {
.name = "musb-ux500",
.pm = &ux500_pm_ops,
.of_match_table = ux500_match,
},
};
MODULE_DESCRIPTION("UX500 MUSB Glue Layer");
MODULE_AUTHOR("Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>");
MODULE_LICENSE("GPL v2");
module_platform_driver(ux500_driver);
|