Bootlin logo

Elixir Cross Referencer

   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
/*
 * i2c IR lirc driver for devices with zilog IR processors
 *
 * Copyright (c) 2000 Gerd Knorr <kraxel@goldbach.in-berlin.de>
 * modified for PixelView (BT878P+W/FM) by
 *      Michal Kochanowicz <mkochano@pld.org.pl>
 *      Christoph Bartelmus <lirc@bartelmus.de>
 * modified for KNC ONE TV Station/Anubis Typhoon TView Tuner by
 *      Ulrich Mueller <ulrich.mueller42@web.de>
 * modified for Asus TV-Box and Creative/VisionTek BreakOut-Box by
 *      Stefan Jahn <stefan@lkcc.org>
 * modified for inclusion into kernel sources by
 *      Jerome Brock <jbrock@users.sourceforge.net>
 * modified for Leadtek Winfast PVR2000 by
 *      Thomas Reitmayr (treitmayr@yahoo.com)
 * modified for Hauppauge PVR-150 IR TX device by
 *      Mark Weaver <mark@npsl.co.uk>
 * changed name from lirc_pvr150 to lirc_zilog, works on more than pvr-150
 *	Jarod Wilson <jarod@redhat.com>
 *
 * parts are cut&pasted from the lirc_i2c.c driver
 *
 * Numerous changes updating lirc_zilog.c in kernel 2.6.38 and later are
 * Copyright (C) 2011 Andy Walls <awalls@md.metrocast.net>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 */

#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/poll.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/completion.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/firmware.h>
#include <linux/vmalloc.h>

#include <linux/mutex.h>
#include <linux/kthread.h>

#include <media/lirc_dev.h>
#include <media/lirc.h>

/* Max transfer size done by I2C transfer functions */
#define MAX_XFER_SIZE  64

struct IR;

struct IR_rx {
	struct kref ref;
	struct IR *ir;

	/* RX device */
	struct mutex client_lock;
	struct i2c_client *c;

	/* RX polling thread data */
	struct task_struct *task;

	/* RX read data */
	unsigned char b[3];
	bool hdpvr_data_fmt;
};

struct IR_tx {
	struct kref ref;
	struct IR *ir;

	/* TX device */
	struct mutex client_lock;
	struct i2c_client *c;

	/* TX additional actions needed */
	int need_boot;
	bool post_tx_ready_poll;
};

struct IR {
	struct kref ref;
	struct list_head list;

	/* FIXME spinlock access to l.features */
	struct lirc_driver l;
	struct lirc_buffer rbuf;

	struct mutex ir_lock;
	atomic_t open_count;

	struct i2c_adapter *adapter;

	spinlock_t rx_ref_lock; /* struct IR_rx kref get()/put() */
	struct IR_rx *rx;

	spinlock_t tx_ref_lock; /* struct IR_tx kref get()/put() */
	struct IR_tx *tx;
};

/* IR transceiver instance object list */
/*
 * This lock is used for the following:
 * a. ir_devices_list access, insertions, deletions
 * b. struct IR kref get()s and put()s
 * c. serialization of ir_probe() for the two i2c_clients for a Z8
 */
static DEFINE_MUTEX(ir_devices_lock);
static LIST_HEAD(ir_devices_list);

/* Block size for IR transmitter */
#define TX_BLOCK_SIZE	99

/* Hauppauge IR transmitter data */
struct tx_data_struct {
	/* Boot block */
	unsigned char *boot_data;

	/* Start of binary data block */
	unsigned char *datap;

	/* End of binary data block */
	unsigned char *endp;

	/* Number of installed codesets */
	unsigned int num_code_sets;

	/* Pointers to codesets */
	unsigned char **code_sets;

	/* Global fixed data template */
	int fixed[TX_BLOCK_SIZE];
};

static struct tx_data_struct *tx_data;
static struct mutex tx_data_lock;


/* module parameters */
static bool debug;	/* debug output */
static bool tx_only;	/* only handle the IR Tx function */
static int minor = -1;	/* minor number */


/* struct IR reference counting */
static struct IR *get_ir_device(struct IR *ir, bool ir_devices_lock_held)
{
	if (ir_devices_lock_held) {
		kref_get(&ir->ref);
	} else {
		mutex_lock(&ir_devices_lock);
		kref_get(&ir->ref);
		mutex_unlock(&ir_devices_lock);
	}
	return ir;
}

static void release_ir_device(struct kref *ref)
{
	struct IR *ir = container_of(ref, struct IR, ref);

	/*
	 * Things should be in this state by now:
	 * ir->rx set to NULL and deallocated - happens before ir->rx->ir put()
	 * ir->rx->task kthread stopped - happens before ir->rx->ir put()
	 * ir->tx set to NULL and deallocated - happens before ir->tx->ir put()
	 * ir->open_count ==  0 - happens on final close()
	 * ir_lock, tx_ref_lock, rx_ref_lock, all released
	 */
	if (ir->l.minor >= 0 && ir->l.minor < MAX_IRCTL_DEVICES) {
		lirc_unregister_driver(ir->l.minor);
		ir->l.minor = MAX_IRCTL_DEVICES;
	}
	if (kfifo_initialized(&ir->rbuf.fifo))
		lirc_buffer_free(&ir->rbuf);
	list_del(&ir->list);
	kfree(ir);
}

static int put_ir_device(struct IR *ir, bool ir_devices_lock_held)
{
	int released;

	if (ir_devices_lock_held)
		return kref_put(&ir->ref, release_ir_device);

	mutex_lock(&ir_devices_lock);
	released = kref_put(&ir->ref, release_ir_device);
	mutex_unlock(&ir_devices_lock);

	return released;
}

/* struct IR_rx reference counting */
static struct IR_rx *get_ir_rx(struct IR *ir)
{
	struct IR_rx *rx;

	spin_lock(&ir->rx_ref_lock);
	rx = ir->rx;
	if (rx != NULL)
		kref_get(&rx->ref);
	spin_unlock(&ir->rx_ref_lock);
	return rx;
}

static void destroy_rx_kthread(struct IR_rx *rx, bool ir_devices_lock_held)
{
	/* end up polling thread */
	if (!IS_ERR_OR_NULL(rx->task)) {
		kthread_stop(rx->task);
		rx->task = NULL;
		/* Put the ir ptr that ir_probe() gave to the rx poll thread */
		put_ir_device(rx->ir, ir_devices_lock_held);
	}
}

static void release_ir_rx(struct kref *ref)
{
	struct IR_rx *rx = container_of(ref, struct IR_rx, ref);
	struct IR *ir = rx->ir;

	/*
	 * This release function can't do all the work, as we want
	 * to keep the rx_ref_lock a spinlock, and killing the poll thread
	 * and releasing the ir reference can cause a sleep.  That work is
	 * performed by put_ir_rx()
	 */
	ir->l.features &= ~LIRC_CAN_REC_LIRCCODE;
	/* Don't put_ir_device(rx->ir) here; lock can't be freed yet */
	ir->rx = NULL;
	/* Don't do the kfree(rx) here; we still need to kill the poll thread */
}

static int put_ir_rx(struct IR_rx *rx, bool ir_devices_lock_held)
{
	int released;
	struct IR *ir = rx->ir;

	spin_lock(&ir->rx_ref_lock);
	released = kref_put(&rx->ref, release_ir_rx);
	spin_unlock(&ir->rx_ref_lock);
	/* Destroy the rx kthread while not holding the spinlock */
	if (released) {
		destroy_rx_kthread(rx, ir_devices_lock_held);
		kfree(rx);
		/* Make sure we're not still in a poll_table somewhere */
		wake_up_interruptible(&ir->rbuf.wait_poll);
	}
	/* Do a reference put() for the rx->ir reference, if we released rx */
	if (released)
		put_ir_device(ir, ir_devices_lock_held);
	return released;
}

/* struct IR_tx reference counting */
static struct IR_tx *get_ir_tx(struct IR *ir)
{
	struct IR_tx *tx;

	spin_lock(&ir->tx_ref_lock);
	tx = ir->tx;
	if (tx != NULL)
		kref_get(&tx->ref);
	spin_unlock(&ir->tx_ref_lock);
	return tx;
}

static void release_ir_tx(struct kref *ref)
{
	struct IR_tx *tx = container_of(ref, struct IR_tx, ref);
	struct IR *ir = tx->ir;

	ir->l.features &= ~LIRC_CAN_SEND_PULSE;
	/* Don't put_ir_device(tx->ir) here, so our lock doesn't get freed */
	ir->tx = NULL;
	kfree(tx);
}

static int put_ir_tx(struct IR_tx *tx, bool ir_devices_lock_held)
{
	int released;
	struct IR *ir = tx->ir;

	spin_lock(&ir->tx_ref_lock);
	released = kref_put(&tx->ref, release_ir_tx);
	spin_unlock(&ir->tx_ref_lock);
	/* Do a reference put() for the tx->ir reference, if we released tx */
	if (released)
		put_ir_device(ir, ir_devices_lock_held);
	return released;
}

static int add_to_buf(struct IR *ir)
{
	__u16 code;
	unsigned char codes[2];
	unsigned char keybuf[6];
	int got_data = 0;
	int ret;
	int failures = 0;
	unsigned char sendbuf[1] = { 0 };
	struct lirc_buffer *rbuf = ir->l.rbuf;
	struct IR_rx *rx;
	struct IR_tx *tx;

	if (lirc_buffer_full(rbuf)) {
		dev_dbg(ir->l.dev, "buffer overflow\n");
		return -EOVERFLOW;
	}

	rx = get_ir_rx(ir);
	if (rx == NULL)
		return -ENXIO;

	/* Ensure our rx->c i2c_client remains valid for the duration */
	mutex_lock(&rx->client_lock);
	if (rx->c == NULL) {
		mutex_unlock(&rx->client_lock);
		put_ir_rx(rx, false);
		return -ENXIO;
	}

	tx = get_ir_tx(ir);

	/*
	 * service the device as long as it is returning
	 * data and we have space
	 */
	do {
		if (kthread_should_stop()) {
			ret = -ENODATA;
			break;
		}

		/*
		 * Lock i2c bus for the duration.  RX/TX chips interfere so
		 * this is worth it
		 */
		mutex_lock(&ir->ir_lock);

		if (kthread_should_stop()) {
			mutex_unlock(&ir->ir_lock);
			ret = -ENODATA;
			break;
		}

		/*
		 * Send random "poll command" (?)  Windows driver does this
		 * and it is a good point to detect chip failure.
		 */
		ret = i2c_master_send(rx->c, sendbuf, 1);
		if (ret != 1) {
			dev_err(ir->l.dev, "i2c_master_send failed with %d\n",
				ret);
			if (failures >= 3) {
				mutex_unlock(&ir->ir_lock);
				dev_err(ir->l.dev,
					"unable to read from the IR chip after 3 resets, giving up\n");
				break;
			}

			/* Looks like the chip crashed, reset it */
			dev_err(ir->l.dev,
				"polling the IR receiver chip failed, trying reset\n");

			set_current_state(TASK_UNINTERRUPTIBLE);
			if (kthread_should_stop()) {
				mutex_unlock(&ir->ir_lock);
				ret = -ENODATA;
				break;
			}
			schedule_timeout((100 * HZ + 999) / 1000);
			if (tx != NULL)
				tx->need_boot = 1;

			++failures;
			mutex_unlock(&ir->ir_lock);
			ret = 0;
			continue;
		}

		if (kthread_should_stop()) {
			mutex_unlock(&ir->ir_lock);
			ret = -ENODATA;
			break;
		}
		ret = i2c_master_recv(rx->c, keybuf, sizeof(keybuf));
		mutex_unlock(&ir->ir_lock);
		if (ret != sizeof(keybuf)) {
			dev_err(ir->l.dev,
				"i2c_master_recv failed with %d -- keeping last read buffer\n",
				ret);
		} else {
			rx->b[0] = keybuf[3];
			rx->b[1] = keybuf[4];
			rx->b[2] = keybuf[5];
			dev_dbg(ir->l.dev,
				"key (0x%02x/0x%02x)\n",
				rx->b[0], rx->b[1]);
		}

		/* key pressed ? */
		if (rx->hdpvr_data_fmt) {
			if (got_data && (keybuf[0] == 0x80)) {
				ret = 0;
				break;
			} else if (got_data && (keybuf[0] == 0x00)) {
				ret = -ENODATA;
				break;
			}
		} else if ((rx->b[0] & 0x80) == 0) {
			ret = got_data ? 0 : -ENODATA;
			break;
		}

		/* look what we have */
		code = (((__u16)rx->b[0] & 0x7f) << 6) | (rx->b[1] >> 2);

		codes[0] = (code >> 8) & 0xff;
		codes[1] = code & 0xff;

		/* return it */
		lirc_buffer_write(rbuf, codes);
		++got_data;
		ret = 0;
	} while (!lirc_buffer_full(rbuf));

	mutex_unlock(&rx->client_lock);
	if (tx != NULL)
		put_ir_tx(tx, false);
	put_ir_rx(rx, false);
	return ret;
}

/*
 * Main function of the polling thread -- from lirc_dev.
 * We don't fit the LIRC model at all anymore.  This is horrible, but
 * basically we have a single RX/TX device with a nasty failure mode
 * that needs to be accounted for across the pair.  lirc lets us provide
 * fops, but prevents us from using the internal polling, etc. if we do
 * so.  Hence the replication.  Might be neater to extend the LIRC model
 * to account for this but I'd think it's a very special case of seriously
 * messed up hardware.
 */
static int lirc_thread(void *arg)
{
	struct IR *ir = arg;
	struct lirc_buffer *rbuf = ir->l.rbuf;

	dev_dbg(ir->l.dev, "poll thread started\n");

	while (!kthread_should_stop()) {
		set_current_state(TASK_INTERRUPTIBLE);

		/* if device not opened, we can sleep half a second */
		if (atomic_read(&ir->open_count) == 0) {
			schedule_timeout(HZ/2);
			continue;
		}

		/*
		 * This is ~113*2 + 24 + jitter (2*repeat gap + code length).
		 * We use this interval as the chip resets every time you poll
		 * it (bad!).  This is therefore just sufficient to catch all
		 * of the button presses.  It makes the remote much more
		 * responsive.  You can see the difference by running irw and
		 * holding down a button.  With 100ms, the old polling
		 * interval, you'll notice breaks in the repeat sequence
		 * corresponding to lost keypresses.
		 */
		schedule_timeout((260 * HZ) / 1000);
		if (kthread_should_stop())
			break;
		if (!add_to_buf(ir))
			wake_up_interruptible(&rbuf->wait_poll);
	}

	dev_dbg(ir->l.dev, "poll thread ended\n");
	return 0;
}

static int set_use_inc(void *data)
{
	return 0;
}

static void set_use_dec(void *data)
{
}

/* safe read of a uint32 (always network byte order) */
static int read_uint32(unsigned char **data,
				     unsigned char *endp, unsigned int *val)
{
	if (*data + 4 > endp)
		return 0;
	*val = ((*data)[0] << 24) | ((*data)[1] << 16) |
	       ((*data)[2] << 8) | (*data)[3];
	*data += 4;
	return 1;
}

/* safe read of a uint8 */
static int read_uint8(unsigned char **data,
				    unsigned char *endp, unsigned char *val)
{
	if (*data + 1 > endp)
		return 0;
	*val = *((*data)++);
	return 1;
}

/* safe skipping of N bytes */
static int skip(unsigned char **data,
			      unsigned char *endp, unsigned int distance)
{
	if (*data + distance > endp)
		return 0;
	*data += distance;
	return 1;
}

/* decompress key data into the given buffer */
static int get_key_data(unsigned char *buf,
			     unsigned int codeset, unsigned int key)
{
	unsigned char *data, *endp, *diffs, *key_block;
	unsigned char keys, ndiffs, id;
	unsigned int base, lim, pos, i;

	/* Binary search for the codeset */
	for (base = 0, lim = tx_data->num_code_sets; lim; lim >>= 1) {
		pos = base + (lim >> 1);
		data = tx_data->code_sets[pos];

		if (!read_uint32(&data, tx_data->endp, &i))
			goto corrupt;

		if (i == codeset)
			break;
		else if (codeset > i) {
			base = pos + 1;
			--lim;
		}
	}
	/* Not found? */
	if (!lim)
		return -EPROTO;

	/* Set end of data block */
	endp = pos < tx_data->num_code_sets - 1 ?
		tx_data->code_sets[pos + 1] : tx_data->endp;

	/* Read the block header */
	if (!read_uint8(&data, endp, &keys) ||
	    !read_uint8(&data, endp, &ndiffs) ||
	    ndiffs > TX_BLOCK_SIZE || keys == 0)
		goto corrupt;

	/* Save diffs & skip */
	diffs = data;
	if (!skip(&data, endp, ndiffs))
		goto corrupt;

	/* Read the id of the first key */
	if (!read_uint8(&data, endp, &id))
		goto corrupt;

	/* Unpack the first key's data */
	for (i = 0; i < TX_BLOCK_SIZE; ++i) {
		if (tx_data->fixed[i] == -1) {
			if (!read_uint8(&data, endp, &buf[i]))
				goto corrupt;
		} else {
			buf[i] = (unsigned char)tx_data->fixed[i];
		}
	}

	/* Early out key found/not found */
	if (key == id)
		return 0;
	if (keys == 1)
		return -EPROTO;

	/* Sanity check */
	key_block = data;
	if (!skip(&data, endp, (keys - 1) * (ndiffs + 1)))
		goto corrupt;

	/* Binary search for the key */
	for (base = 0, lim = keys - 1; lim; lim >>= 1) {
		/* Seek to block */
		unsigned char *key_data;

		pos = base + (lim >> 1);
		key_data = key_block + (ndiffs + 1) * pos;

		if (*key_data == key) {
			/* skip key id */
			++key_data;

			/* found, so unpack the diffs */
			for (i = 0; i < ndiffs; ++i) {
				unsigned char val;

				if (!read_uint8(&key_data, endp, &val) ||
				    diffs[i] >= TX_BLOCK_SIZE)
					goto corrupt;
				buf[diffs[i]] = val;
			}

			return 0;
		} else if (key > *key_data) {
			base = pos + 1;
			--lim;
		}
	}
	/* Key not found */
	return -EPROTO;

corrupt:
	pr_err("firmware is corrupt\n");
	return -EFAULT;
}

/* send a block of data to the IR TX device */
static int send_data_block(struct IR_tx *tx, unsigned char *data_block)
{
	int i, j, ret;
	unsigned char buf[5];

	for (i = 0; i < TX_BLOCK_SIZE;) {
		int tosend = TX_BLOCK_SIZE - i;

		if (tosend > 4)
			tosend = 4;
		buf[0] = (unsigned char)(i + 1);
		for (j = 0; j < tosend; ++j)
			buf[1 + j] = data_block[i + j];
		dev_dbg(tx->ir->l.dev, "%*ph", 5, buf);
		ret = i2c_master_send(tx->c, buf, tosend + 1);
		if (ret != tosend + 1) {
			dev_err(tx->ir->l.dev,
				"i2c_master_send failed with %d\n", ret);
			return ret < 0 ? ret : -EFAULT;
		}
		i += tosend;
	}
	return 0;
}

/* send boot data to the IR TX device */
static int send_boot_data(struct IR_tx *tx)
{
	int ret, i;
	unsigned char buf[4];

	/* send the boot block */
	ret = send_data_block(tx, tx_data->boot_data);
	if (ret != 0)
		return ret;

	/* Hit the go button to activate the new boot data */
	buf[0] = 0x00;
	buf[1] = 0x20;
	ret = i2c_master_send(tx->c, buf, 2);
	if (ret != 2) {
		dev_err(tx->ir->l.dev, "i2c_master_send failed with %d\n", ret);
		return ret < 0 ? ret : -EFAULT;
	}

	/*
	 * Wait for zilog to settle after hitting go post boot block upload.
	 * Without this delay, the HD-PVR and HVR-1950 both return an -EIO
	 * upon attempting to get firmware revision, and tx probe thus fails.
	 */
	for (i = 0; i < 10; i++) {
		ret = i2c_master_send(tx->c, buf, 1);
		if (ret == 1)
			break;
		udelay(100);
	}

	if (ret != 1) {
		dev_err(tx->ir->l.dev, "i2c_master_send failed with %d\n", ret);
		return ret < 0 ? ret : -EFAULT;
	}

	/* Here comes the firmware version... (hopefully) */
	ret = i2c_master_recv(tx->c, buf, 4);
	if (ret != 4) {
		dev_err(tx->ir->l.dev, "i2c_master_recv failed with %d\n", ret);
		return 0;
	}
	if ((buf[0] != 0x80) && (buf[0] != 0xa0)) {
		dev_err(tx->ir->l.dev, "unexpected IR TX init response: %02x\n",
			buf[0]);
		return 0;
	}
	dev_notice(tx->ir->l.dev,
		   "Zilog/Hauppauge IR blaster firmware version %d.%d.%d loaded\n",
		   buf[1], buf[2], buf[3]);

	return 0;
}

/* unload "firmware", lock held */
static void fw_unload_locked(void)
{
	if (tx_data) {
		vfree(tx_data->code_sets);

		vfree(tx_data->datap);

		vfree(tx_data);
		tx_data = NULL;
		pr_debug("successfully unloaded IR blaster firmware\n");
	}
}

/* unload "firmware" for the IR TX device */
static void fw_unload(void)
{
	mutex_lock(&tx_data_lock);
	fw_unload_locked();
	mutex_unlock(&tx_data_lock);
}

/* load "firmware" for the IR TX device */
static int fw_load(struct IR_tx *tx)
{
	int ret;
	unsigned int i;
	unsigned char *data, version, num_global_fixed;
	const struct firmware *fw_entry;

	/* Already loaded? */
	mutex_lock(&tx_data_lock);
	if (tx_data) {
		ret = 0;
		goto out;
	}

	/* Request codeset data file */
	ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", tx->ir->l.dev);
	if (ret != 0) {
		dev_err(tx->ir->l.dev,
			"firmware haup-ir-blaster.bin not available (%d)\n",
			ret);
		ret = ret < 0 ? ret : -EFAULT;
		goto out;
	}
	dev_dbg(tx->ir->l.dev, "firmware of size %zu loaded\n", fw_entry->size);

	/* Parse the file */
	tx_data = vmalloc(sizeof(*tx_data));
	if (tx_data == NULL) {
		release_firmware(fw_entry);
		ret = -ENOMEM;
		goto out;
	}
	tx_data->code_sets = NULL;

	/* Copy the data so hotplug doesn't get confused and timeout */
	tx_data->datap = vmalloc(fw_entry->size);
	if (tx_data->datap == NULL) {
		release_firmware(fw_entry);
		vfree(tx_data);
		ret = -ENOMEM;
		goto out;
	}
	memcpy(tx_data->datap, fw_entry->data, fw_entry->size);
	tx_data->endp = tx_data->datap + fw_entry->size;
	release_firmware(fw_entry); fw_entry = NULL;

	/* Check version */
	data = tx_data->datap;
	if (!read_uint8(&data, tx_data->endp, &version))
		goto corrupt;
	if (version != 1) {
		dev_err(tx->ir->l.dev,
			"unsupported code set file version (%u, expected 1) -- please upgrade to a newer driver\n",
			version);
		fw_unload_locked();
		ret = -EFAULT;
		goto out;
	}

	/* Save boot block for later */
	tx_data->boot_data = data;
	if (!skip(&data, tx_data->endp, TX_BLOCK_SIZE))
		goto corrupt;

	if (!read_uint32(&data, tx_data->endp,
			      &tx_data->num_code_sets))
		goto corrupt;

	dev_dbg(tx->ir->l.dev, "%u IR blaster codesets loaded\n",
		tx_data->num_code_sets);

	tx_data->code_sets = vmalloc(
		tx_data->num_code_sets * sizeof(char *));
	if (tx_data->code_sets == NULL) {
		fw_unload_locked();
		ret = -ENOMEM;
		goto out;
	}

	for (i = 0; i < TX_BLOCK_SIZE; ++i)
		tx_data->fixed[i] = -1;

	/* Read global fixed data template */
	if (!read_uint8(&data, tx_data->endp, &num_global_fixed) ||
	    num_global_fixed > TX_BLOCK_SIZE)
		goto corrupt;
	for (i = 0; i < num_global_fixed; ++i) {
		unsigned char pos, val;

		if (!read_uint8(&data, tx_data->endp, &pos) ||
		    !read_uint8(&data, tx_data->endp, &val) ||
		    pos >= TX_BLOCK_SIZE)
			goto corrupt;
		tx_data->fixed[pos] = (int)val;
	}

	/* Filch out the position of each code set */
	for (i = 0; i < tx_data->num_code_sets; ++i) {
		unsigned int id;
		unsigned char keys;
		unsigned char ndiffs;

		/* Save the codeset position */
		tx_data->code_sets[i] = data;

		/* Read header */
		if (!read_uint32(&data, tx_data->endp, &id) ||
		    !read_uint8(&data, tx_data->endp, &keys) ||
		    !read_uint8(&data, tx_data->endp, &ndiffs) ||
		    ndiffs > TX_BLOCK_SIZE || keys == 0)
			goto corrupt;

		/* skip diff positions */
		if (!skip(&data, tx_data->endp, ndiffs))
			goto corrupt;

		/*
		 * After the diffs we have the first key id + data -
		 * global fixed
		 */
		if (!skip(&data, tx_data->endp,
			       1 + TX_BLOCK_SIZE - num_global_fixed))
			goto corrupt;

		/* Then we have keys-1 blocks of key id+diffs */
		if (!skip(&data, tx_data->endp,
			       (ndiffs + 1) * (keys - 1)))
			goto corrupt;
	}
	ret = 0;
	goto out;

corrupt:
	dev_err(tx->ir->l.dev, "firmware is corrupt\n");
	fw_unload_locked();
	ret = -EFAULT;

out:
	mutex_unlock(&tx_data_lock);
	return ret;
}

/* copied from lirc_dev */
static ssize_t read(struct file *filep, char __user *outbuf, size_t n,
		    loff_t *ppos)
{
	struct IR *ir = filep->private_data;
	struct IR_rx *rx;
	struct lirc_buffer *rbuf = ir->l.rbuf;
	int ret = 0, written = 0, retries = 0;
	unsigned int m;
	DECLARE_WAITQUEUE(wait, current);

	dev_dbg(ir->l.dev, "read called\n");
	if (n % rbuf->chunk_size) {
		dev_dbg(ir->l.dev, "read result = -EINVAL\n");
		return -EINVAL;
	}

	rx = get_ir_rx(ir);
	if (rx == NULL)
		return -ENXIO;

	/*
	 * we add ourselves to the task queue before buffer check
	 * to avoid losing scan code (in case when queue is awaken somewhere
	 * between while condition checking and scheduling)
	 */
	add_wait_queue(&rbuf->wait_poll, &wait);
	set_current_state(TASK_INTERRUPTIBLE);

	/*
	 * while we didn't provide 'length' bytes, device is opened in blocking
	 * mode and 'copy_to_user' is happy, wait for data.
	 */
	while (written < n && ret == 0) {
		if (lirc_buffer_empty(rbuf)) {
			/*
			 * According to the read(2) man page, 'written' can be
			 * returned as less than 'n', instead of blocking
			 * again, returning -EWOULDBLOCK, or returning
			 * -ERESTARTSYS
			 */
			if (written)
				break;
			if (filep->f_flags & O_NONBLOCK) {
				ret = -EWOULDBLOCK;
				break;
			}
			if (signal_pending(current)) {
				ret = -ERESTARTSYS;
				break;
			}
			schedule();
			set_current_state(TASK_INTERRUPTIBLE);
		} else {
			unsigned char buf[MAX_XFER_SIZE];

			if (rbuf->chunk_size > sizeof(buf)) {
				dev_err(ir->l.dev,
					"chunk_size is too big (%d)!\n",
					rbuf->chunk_size);
				ret = -EINVAL;
				break;
			}
			m = lirc_buffer_read(rbuf, buf);
			if (m == rbuf->chunk_size) {
				ret = copy_to_user(outbuf + written, buf,
						   rbuf->chunk_size);
				written += rbuf->chunk_size;
			} else {
				retries++;
			}
			if (retries >= 5) {
				dev_err(ir->l.dev, "Buffer read failed!\n");
				ret = -EIO;
			}
		}
	}

	remove_wait_queue(&rbuf->wait_poll, &wait);
	put_ir_rx(rx, false);
	set_current_state(TASK_RUNNING);

	dev_dbg(ir->l.dev, "read result = %d (%s)\n", ret,
		ret ? "Error" : "OK");

	return ret ? ret : written;
}

/* send a keypress to the IR TX device */
static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
{
	unsigned char data_block[TX_BLOCK_SIZE];
	unsigned char buf[2];
	int i, ret;

	/* Get data for the codeset/key */
	ret = get_key_data(data_block, code, key);

	if (ret == -EPROTO) {
		dev_err(tx->ir->l.dev,
			"failed to get data for code %u, key %u -- check lircd.conf entries\n",
			code, key);
		return ret;
	} else if (ret != 0)
		return ret;

	/* Send the data block */
	ret = send_data_block(tx, data_block);
	if (ret != 0)
		return ret;

	/* Send data block length? */
	buf[0] = 0x00;
	buf[1] = 0x40;
	ret = i2c_master_send(tx->c, buf, 2);
	if (ret != 2) {
		dev_err(tx->ir->l.dev, "i2c_master_send failed with %d\n", ret);
		return ret < 0 ? ret : -EFAULT;
	}

	/* Give the z8 a moment to process data block */
	for (i = 0; i < 10; i++) {
		ret = i2c_master_send(tx->c, buf, 1);
		if (ret == 1)
			break;
		udelay(100);
	}

	if (ret != 1) {
		dev_err(tx->ir->l.dev, "i2c_master_send failed with %d\n", ret);
		return ret < 0 ? ret : -EFAULT;
	}

	/* Send finished download? */
	ret = i2c_master_recv(tx->c, buf, 1);
	if (ret != 1) {
		dev_err(tx->ir->l.dev, "i2c_master_recv failed with %d\n", ret);
		return ret < 0 ? ret : -EFAULT;
	}
	if (buf[0] != 0xA0) {
		dev_err(tx->ir->l.dev, "unexpected IR TX response #1: %02x\n",
			buf[0]);
		return -EFAULT;
	}

	/* Send prepare command? */
	buf[0] = 0x00;
	buf[1] = 0x80;
	ret = i2c_master_send(tx->c, buf, 2);
	if (ret != 2) {
		dev_err(tx->ir->l.dev, "i2c_master_send failed with %d\n", ret);
		return ret < 0 ? ret : -EFAULT;
	}

	/*
	 * The sleep bits aren't necessary on the HD PVR, and in fact, the
	 * last i2c_master_recv always fails with a -5, so for now, we're
	 * going to skip this whole mess and say we're done on the HD PVR
	 */
	if (!tx->post_tx_ready_poll) {
		dev_dbg(tx->ir->l.dev, "sent code %u, key %u\n", code, key);
		return 0;
	}

	/*
	 * This bit NAKs until the device is ready, so we retry it
	 * sleeping a bit each time.  This seems to be what the windows
	 * driver does, approximately.
	 * Try for up to 1s.
	 */
	for (i = 0; i < 20; ++i) {
		set_current_state(TASK_UNINTERRUPTIBLE);
		schedule_timeout((50 * HZ + 999) / 1000);
		ret = i2c_master_send(tx->c, buf, 1);
		if (ret == 1)
			break;
		dev_dbg(tx->ir->l.dev,
			"NAK expected: i2c_master_send failed with %d (try %d)\n",
			ret, i+1);
	}
	if (ret != 1) {
		dev_err(tx->ir->l.dev,
			"IR TX chip never got ready: last i2c_master_send failed with %d\n",
			ret);
		return ret < 0 ? ret : -EFAULT;
	}

	/* Seems to be an 'ok' response */
	i = i2c_master_recv(tx->c, buf, 1);
	if (i != 1) {
		dev_err(tx->ir->l.dev, "i2c_master_recv failed with %d\n", ret);
		return -EFAULT;
	}
	if (buf[0] != 0x80) {
		dev_err(tx->ir->l.dev, "unexpected IR TX response #2: %02x\n",
			buf[0]);
		return -EFAULT;
	}

	/* Oh good, it worked */
	dev_dbg(tx->ir->l.dev, "sent code %u, key %u\n", code, key);
	return 0;
}

/*
 * Write a code to the device.  We take in a 32-bit number (an int) and then
 * decode this to a codeset/key index.  The key data is then decompressed and
 * sent to the device.  We have a spin lock as per i2c documentation to prevent
 * multiple concurrent sends which would probably cause the device to explode.
 */
static ssize_t write(struct file *filep, const char __user *buf, size_t n,
		     loff_t *ppos)
{
	struct IR *ir = filep->private_data;
	struct IR_tx *tx;
	size_t i;
	int failures = 0;

	/* Validate user parameters */
	if (n % sizeof(int))
		return -EINVAL;

	/* Get a struct IR_tx reference */
	tx = get_ir_tx(ir);
	if (tx == NULL)
		return -ENXIO;

	/* Ensure our tx->c i2c_client remains valid for the duration */
	mutex_lock(&tx->client_lock);
	if (tx->c == NULL) {
		mutex_unlock(&tx->client_lock);
		put_ir_tx(tx, false);
		return -ENXIO;
	}

	/* Lock i2c bus for the duration */
	mutex_lock(&ir->ir_lock);

	/* Send each keypress */
	for (i = 0; i < n;) {
		int ret = 0;
		int command;

		if (copy_from_user(&command, buf + i, sizeof(command))) {
			mutex_unlock(&ir->ir_lock);
			mutex_unlock(&tx->client_lock);
			put_ir_tx(tx, false);
			return -EFAULT;
		}

		/* Send boot data first if required */
		if (tx->need_boot == 1) {
			/* Make sure we have the 'firmware' loaded, first */
			ret = fw_load(tx);
			if (ret != 0) {
				mutex_unlock(&ir->ir_lock);
				mutex_unlock(&tx->client_lock);
				put_ir_tx(tx, false);
				if (ret != -ENOMEM)
					ret = -EIO;
				return ret;
			}
			/* Prep the chip for transmitting codes */
			ret = send_boot_data(tx);
			if (ret == 0)
				tx->need_boot = 0;
		}

		/* Send the code */
		if (ret == 0) {
			ret = send_code(tx, (unsigned)command >> 16,
					    (unsigned)command & 0xFFFF);
			if (ret == -EPROTO) {
				mutex_unlock(&ir->ir_lock);
				mutex_unlock(&tx->client_lock);
				put_ir_tx(tx, false);
				return ret;
			}
		}

		/*
		 * Hmm, a failure.  If we've had a few then give up, otherwise
		 * try a reset
		 */
		if (ret != 0) {
			/* Looks like the chip crashed, reset it */
			dev_err(tx->ir->l.dev,
				"sending to the IR transmitter chip failed, trying reset\n");

			if (failures >= 3) {
				dev_err(tx->ir->l.dev,
					"unable to send to the IR chip after 3 resets, giving up\n");
				mutex_unlock(&ir->ir_lock);
				mutex_unlock(&tx->client_lock);
				put_ir_tx(tx, false);
				return ret;
			}
			set_current_state(TASK_UNINTERRUPTIBLE);
			schedule_timeout((100 * HZ + 999) / 1000);
			tx->need_boot = 1;
			++failures;
		} else
			i += sizeof(int);
	}

	/* Release i2c bus */
	mutex_unlock(&ir->ir_lock);

	mutex_unlock(&tx->client_lock);

	/* Give back our struct IR_tx reference */
	put_ir_tx(tx, false);

	/* All looks good */
	return n;
}

/* copied from lirc_dev */
static unsigned int poll(struct file *filep, poll_table *wait)
{
	struct IR *ir = filep->private_data;
	struct IR_rx *rx;
	struct lirc_buffer *rbuf = ir->l.rbuf;
	unsigned int ret;

	dev_dbg(ir->l.dev, "poll called\n");

	rx = get_ir_rx(ir);
	if (rx == NULL) {
		/*
		 * Revisit this, if our poll function ever reports writeable
		 * status for Tx
		 */
		dev_dbg(ir->l.dev, "poll result = POLLERR\n");
		return POLLERR;
	}

	/*
	 * Add our lirc_buffer's wait_queue to the poll_table. A wake up on
	 * that buffer's wait queue indicates we may have a new poll status.
	 */
	poll_wait(filep, &rbuf->wait_poll, wait);

	/* Indicate what ops could happen immediately without blocking */
	ret = lirc_buffer_empty(rbuf) ? 0 : (POLLIN|POLLRDNORM);

	dev_dbg(ir->l.dev, "poll result = %s\n",
		ret ? "POLLIN|POLLRDNORM" : "none");
	return ret;
}

static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
{
	struct IR *ir = filep->private_data;
	unsigned long __user *uptr = (unsigned long __user *)arg;
	int result;
	unsigned long mode, features;

	features = ir->l.features;

	switch (cmd) {
	case LIRC_GET_LENGTH:
		result = put_user(13UL, uptr);
		break;
	case LIRC_GET_FEATURES:
		result = put_user(features, uptr);
		break;
	case LIRC_GET_REC_MODE:
		if (!(features&LIRC_CAN_REC_MASK))
			return -ENOSYS;

		result = put_user(LIRC_REC2MODE
				  (features&LIRC_CAN_REC_MASK),
				  uptr);
		break;
	case LIRC_SET_REC_MODE:
		if (!(features&LIRC_CAN_REC_MASK))
			return -ENOSYS;

		result = get_user(mode, uptr);
		if (!result && !(LIRC_MODE2REC(mode) & features))
			result = -EINVAL;
		break;
	case LIRC_GET_SEND_MODE:
		if (!(features&LIRC_CAN_SEND_MASK))
			return -ENOSYS;

		result = put_user(LIRC_MODE_PULSE, uptr);
		break;
	case LIRC_SET_SEND_MODE:
		if (!(features&LIRC_CAN_SEND_MASK))
			return -ENOSYS;

		result = get_user(mode, uptr);
		if (!result && mode != LIRC_MODE_PULSE)
			return -EINVAL;
		break;
	default:
		return -EINVAL;
	}
	return result;
}

static struct IR *get_ir_device_by_minor(unsigned int minor)
{
	struct IR *ir;
	struct IR *ret = NULL;

	mutex_lock(&ir_devices_lock);

	if (!list_empty(&ir_devices_list)) {
		list_for_each_entry(ir, &ir_devices_list, list) {
			if (ir->l.minor == minor) {
				ret = get_ir_device(ir, true);
				break;
			}
		}
	}

	mutex_unlock(&ir_devices_lock);
	return ret;
}

/*
 * Open the IR device.  Get hold of our IR structure and
 * stash it in private_data for the file
 */
static int open(struct inode *node, struct file *filep)
{
	struct IR *ir;
	unsigned int minor = MINOR(node->i_rdev);

	/* find our IR struct */
	ir = get_ir_device_by_minor(minor);

	if (ir == NULL)
		return -ENODEV;

	atomic_inc(&ir->open_count);

	/* stash our IR struct */
	filep->private_data = ir;

	nonseekable_open(node, filep);
	return 0;
}

/* Close the IR device */
static int close(struct inode *node, struct file *filep)
{
	/* find our IR struct */
	struct IR *ir = filep->private_data;

	if (ir == NULL) {
		pr_err("ir: close: no private_data attached to the file!\n");
		return -ENODEV;
	}

	atomic_dec(&ir->open_count);

	put_ir_device(ir, false);
	return 0;
}

static int ir_remove(struct i2c_client *client);
static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id);

#define ID_FLAG_TX	0x01
#define ID_FLAG_HDPVR	0x02

static const struct i2c_device_id ir_transceiver_id[] = {
	{ "ir_tx_z8f0811_haup",  ID_FLAG_TX                 },
	{ "ir_rx_z8f0811_haup",  0                          },
	{ "ir_tx_z8f0811_hdpvr", ID_FLAG_HDPVR | ID_FLAG_TX },
	{ "ir_rx_z8f0811_hdpvr", ID_FLAG_HDPVR              },
	{ }
};

static struct i2c_driver driver = {
	.driver = {
		.owner	= THIS_MODULE,
		.name	= "Zilog/Hauppauge i2c IR",
	},
	.probe		= ir_probe,
	.remove		= ir_remove,
	.id_table	= ir_transceiver_id,
};

static const struct file_operations lirc_fops = {
	.owner		= THIS_MODULE,
	.llseek		= no_llseek,
	.read		= read,
	.write		= write,
	.poll		= poll,
	.unlocked_ioctl	= ioctl,
#ifdef CONFIG_COMPAT
	.compat_ioctl	= ioctl,
#endif
	.open		= open,
	.release	= close
};

static struct lirc_driver lirc_template = {
	.name		= "lirc_zilog",
	.minor		= -1,
	.code_length	= 13,
	.buffer_size	= BUFLEN / 2,
	.sample_rate	= 0, /* tell lirc_dev to not start its own kthread */
	.chunk_size	= 2,
	.set_use_inc	= set_use_inc,
	.set_use_dec	= set_use_dec,
	.fops		= &lirc_fops,
	.owner		= THIS_MODULE,
};

static int ir_remove(struct i2c_client *client)
{
	if (strncmp("ir_tx_z8", client->name, 8) == 0) {
		struct IR_tx *tx = i2c_get_clientdata(client);

		if (tx != NULL) {
			mutex_lock(&tx->client_lock);
			tx->c = NULL;
			mutex_unlock(&tx->client_lock);
			put_ir_tx(tx, false);
		}
	} else if (strncmp("ir_rx_z8", client->name, 8) == 0) {
		struct IR_rx *rx = i2c_get_clientdata(client);

		if (rx != NULL) {
			mutex_lock(&rx->client_lock);
			rx->c = NULL;
			mutex_unlock(&rx->client_lock);
			put_ir_rx(rx, false);
		}
	}
	return 0;
}


/* ir_devices_lock must be held */
static struct IR *get_ir_device_by_adapter(struct i2c_adapter *adapter)
{
	struct IR *ir;

	if (list_empty(&ir_devices_list))
		return NULL;

	list_for_each_entry(ir, &ir_devices_list, list)
		if (ir->adapter == adapter) {
			get_ir_device(ir, true);
			return ir;
		}

	return NULL;
}

static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
	struct IR *ir;
	struct IR_tx *tx;
	struct IR_rx *rx;
	struct i2c_adapter *adap = client->adapter;
	int ret;
	bool tx_probe = false;

	dev_dbg(&client->dev, "%s: %s on i2c-%d (%s), client addr=0x%02x\n",
		__func__, id->name, adap->nr, adap->name, client->addr);

	/*
	 * The IR receiver    is at i2c address 0x71.
	 * The IR transmitter is at i2c address 0x70.
	 */

	if (id->driver_data & ID_FLAG_TX)
		tx_probe = true;
	else if (tx_only) /* module option */
		return -ENXIO;

	pr_info("probing IR %s on %s (i2c-%d)\n",
		   tx_probe ? "Tx" : "Rx", adap->name, adap->nr);

	mutex_lock(&ir_devices_lock);

	/* Use a single struct IR instance for both the Rx and Tx functions */
	ir = get_ir_device_by_adapter(adap);
	if (ir == NULL) {
		ir = kzalloc(sizeof(struct IR), GFP_KERNEL);
		if (ir == NULL) {
			ret = -ENOMEM;
			goto out_no_ir;
		}
		kref_init(&ir->ref);

		/* store for use in ir_probe() again, and open() later on */
		INIT_LIST_HEAD(&ir->list);
		list_add_tail(&ir->list, &ir_devices_list);

		ir->adapter = adap;
		mutex_init(&ir->ir_lock);
		atomic_set(&ir->open_count, 0);
		spin_lock_init(&ir->tx_ref_lock);
		spin_lock_init(&ir->rx_ref_lock);

		/* set lirc_dev stuff */
		memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver));
		/*
		 * FIXME this is a pointer reference to us, but no refcount.
		 *
		 * This OK for now, since lirc_dev currently won't touch this
		 * buffer as we provide our own lirc_fops.
		 *
		 * Currently our own lirc_fops rely on this ir->l.rbuf pointer
		 */
		ir->l.rbuf = &ir->rbuf;
		ir->l.dev  = &adap->dev;
		ret = lirc_buffer_init(ir->l.rbuf,
				       ir->l.chunk_size, ir->l.buffer_size);
		if (ret)
			goto out_put_ir;
	}

	if (tx_probe) {
		/* Get the IR_rx instance for later, if already allocated */
		rx = get_ir_rx(ir);

		/* Set up a struct IR_tx instance */
		tx = kzalloc(sizeof(struct IR_tx), GFP_KERNEL);
		if (tx == NULL) {
			ret = -ENOMEM;
			goto out_put_xx;
		}
		kref_init(&tx->ref);
		ir->tx = tx;

		ir->l.features |= LIRC_CAN_SEND_PULSE;
		mutex_init(&tx->client_lock);
		tx->c = client;
		tx->need_boot = 1;
		tx->post_tx_ready_poll =
			       (id->driver_data & ID_FLAG_HDPVR) ? false : true;

		/* An ir ref goes to the struct IR_tx instance */
		tx->ir = get_ir_device(ir, true);

		/* A tx ref goes to the i2c_client */
		i2c_set_clientdata(client, get_ir_tx(ir));

		/*
		 * Load the 'firmware'.  We do this before registering with
		 * lirc_dev, so the first firmware load attempt does not happen
		 * after a open() or write() call on the device.
		 *
		 * Failure here is not deemed catastrophic, so the receiver will
		 * still be usable.  Firmware load will be retried in write(),
		 * if it is needed.
		 */
		fw_load(tx);

		/* Proceed only if the Rx client is also ready or not needed */
		if (rx == NULL && !tx_only) {
			dev_info(tx->ir->l.dev,
				 "probe of IR Tx on %s (i2c-%d) done. Waiting on IR Rx.\n",
				 adap->name, adap->nr);
			goto out_ok;
		}
	} else {
		/* Get the IR_tx instance for later, if already allocated */
		tx = get_ir_tx(ir);

		/* Set up a struct IR_rx instance */
		rx = kzalloc(sizeof(struct IR_rx), GFP_KERNEL);
		if (rx == NULL) {
			ret = -ENOMEM;
			goto out_put_xx;
		}
		kref_init(&rx->ref);
		ir->rx = rx;

		ir->l.features |= LIRC_CAN_REC_LIRCCODE;
		mutex_init(&rx->client_lock);
		rx->c = client;
		rx->hdpvr_data_fmt =
			       (id->driver_data & ID_FLAG_HDPVR) ? true : false;

		/* An ir ref goes to the struct IR_rx instance */
		rx->ir = get_ir_device(ir, true);

		/* An rx ref goes to the i2c_client */
		i2c_set_clientdata(client, get_ir_rx(ir));

		/*
		 * Start the polling thread.
		 * It will only perform an empty loop around schedule_timeout()
		 * until we register with lirc_dev and the first user open()
		 */
		/* An ir ref goes to the new rx polling kthread */
		rx->task = kthread_run(lirc_thread, get_ir_device(ir, true),
				       "zilog-rx-i2c-%d", adap->nr);
		if (IS_ERR(rx->task)) {
			ret = PTR_ERR(rx->task);
			dev_err(tx->ir->l.dev,
				"%s: could not start IR Rx polling thread\n",
				__func__);
			/* Failed kthread, so put back the ir ref */
			put_ir_device(ir, true);
			/* Failure exit, so put back rx ref from i2c_client */
			i2c_set_clientdata(client, NULL);
			put_ir_rx(rx, true);
			ir->l.features &= ~LIRC_CAN_REC_LIRCCODE;
			goto out_put_xx;
		}

		/* Proceed only if the Tx client is also ready */
		if (tx == NULL) {
			pr_info("probe of IR Rx on %s (i2c-%d) done. Waiting on IR Tx.\n",
				   adap->name, adap->nr);
			goto out_ok;
		}
	}

	/* register with lirc */
	ir->l.minor = minor; /* module option: user requested minor number */
	ir->l.minor = lirc_register_driver(&ir->l);
	if (ir->l.minor < 0 || ir->l.minor >= MAX_IRCTL_DEVICES) {
		dev_err(tx->ir->l.dev,
			"%s: \"minor\" must be between 0 and %d (%d)!\n",
			__func__, MAX_IRCTL_DEVICES-1, ir->l.minor);
		ret = -EBADRQC;
		goto out_put_xx;
	}
	dev_info(ir->l.dev,
		 "IR unit on %s (i2c-%d) registered as lirc%d and ready\n",
		 adap->name, adap->nr, ir->l.minor);

out_ok:
	if (rx != NULL)
		put_ir_rx(rx, true);
	if (tx != NULL)
		put_ir_tx(tx, true);
	put_ir_device(ir, true);
	dev_info(ir->l.dev,
		 "probe of IR %s on %s (i2c-%d) done\n",
		 tx_probe ? "Tx" : "Rx", adap->name, adap->nr);
	mutex_unlock(&ir_devices_lock);
	return 0;

out_put_xx:
	if (rx != NULL)
		put_ir_rx(rx, true);
	if (tx != NULL)
		put_ir_tx(tx, true);
out_put_ir:
	put_ir_device(ir, true);
out_no_ir:
	dev_err(&client->dev,
		"%s: probing IR %s on %s (i2c-%d) failed with %d\n",
		__func__, tx_probe ? "Tx" : "Rx", adap->name, adap->nr, ret);
	mutex_unlock(&ir_devices_lock);
	return ret;
}

static int __init zilog_init(void)
{
	int ret;

	pr_notice("Zilog/Hauppauge IR driver initializing\n");

	mutex_init(&tx_data_lock);

	request_module("firmware_class");

	ret = i2c_add_driver(&driver);
	if (ret)
		pr_err("initialization failed\n");
	else
		pr_notice("initialization complete\n");

	return ret;
}

static void __exit zilog_exit(void)
{
	i2c_del_driver(&driver);
	/* if loaded */
	fw_unload();
	pr_notice("Zilog/Hauppauge IR driver unloaded\n");
}

module_init(zilog_init);
module_exit(zilog_exit);

MODULE_DESCRIPTION("Zilog/Hauppauge infrared transmitter driver (i2c stack)");
MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, "
	      "Ulrich Mueller, Stefan Jahn, Jerome Brock, Mark Weaver, "
	      "Andy Walls");
MODULE_LICENSE("GPL");
/* for compat with old name, which isn't all that accurate anymore */
MODULE_ALIAS("lirc_pvr150");

module_param(minor, int, 0444);
MODULE_PARM_DESC(minor, "Preferred minor device number");

module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "Enable debugging messages");

module_param(tx_only, bool, 0644);
MODULE_PARM_DESC(tx_only, "Only handle the IR transmit function");