Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 | /*
em28xx-i2c.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
Markus Rechberger <mrechberger@gmail.com>
Mauro Carvalho Chehab <mchehab@infradead.org>
Sascha Sommer <saschasommer@freenet.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/usb.h>
#include <linux/i2c.h>
#include "em28xx.h"
#include "tuner-xc2028.h"
#include <media/v4l2-common.h>
#include <media/tuner.h>
/* ----------------------------------------------------------- */
static unsigned int i2c_scan;
module_param(i2c_scan, int, 0444);
MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
static unsigned int i2c_debug;
module_param(i2c_debug, int, 0644);
MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
#define dprintk2(lvl, fmt, args...) \
do { \
if (i2c_debug >= lvl) { \
printk(KERN_DEBUG "%s at %s: " fmt, \
dev->name, __func__ , ##args); \
} \
} while (0)
/*
* em2800_i2c_send_bytes()
* send up to 4 bytes to the em2800 i2c device
*/
static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
{
int ret;
int write_timeout;
u8 b2[6];
if (len < 1 || len > 4)
return -EOPNOTSUPP;
BUG_ON(len < 1 || len > 4);
b2[5] = 0x80 + len - 1;
b2[4] = addr;
b2[3] = buf[0];
if (len > 1)
b2[2] = buf[1];
if (len > 2)
b2[1] = buf[2];
if (len > 3)
b2[0] = buf[3];
/* trigger write */
ret = dev->em28xx_write_regs(dev, 4 - len, &b2[4 - len], 2 + len);
if (ret != 2 + len) {
em28xx_warn("failed to trigger write to i2c address 0x%x "
"(error=%i)\n", addr, ret);
return (ret < 0) ? ret : -EIO;
}
/* wait for completion */
for (write_timeout = EM2800_I2C_XFER_TIMEOUT; write_timeout > 0;
write_timeout -= 5) {
ret = dev->em28xx_read_reg(dev, 0x05);
if (ret == 0x80 + len - 1) {
return len;
} else if (ret == 0x94 + len - 1) {
return -ENODEV;
} else if (ret < 0) {
em28xx_warn("failed to get i2c transfer status from "
"bridge register (error=%i)\n", ret);
return ret;
}
msleep(5);
}
em28xx_warn("write to i2c device at 0x%x timed out\n", addr);
return -EIO;
}
/*
* em2800_i2c_recv_bytes()
* read up to 4 bytes from the em2800 i2c device
*/
static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
{
u8 buf2[4];
int ret;
int read_timeout;
int i;
if (len < 1 || len > 4)
return -EOPNOTSUPP;
/* trigger read */
buf2[1] = 0x84 + len - 1;
buf2[0] = addr;
ret = dev->em28xx_write_regs(dev, 0x04, buf2, 2);
if (ret != 2) {
em28xx_warn("failed to trigger read from i2c address 0x%x "
"(error=%i)\n", addr, ret);
return (ret < 0) ? ret : -EIO;
}
/* wait for completion */
for (read_timeout = EM2800_I2C_XFER_TIMEOUT; read_timeout > 0;
read_timeout -= 5) {
ret = dev->em28xx_read_reg(dev, 0x05);
if (ret == 0x84 + len - 1) {
break;
} else if (ret == 0x94 + len - 1) {
return -ENODEV;
} else if (ret < 0) {
em28xx_warn("failed to get i2c transfer status from "
"bridge register (error=%i)\n", ret);
return ret;
}
msleep(5);
}
if (ret != 0x84 + len - 1)
em28xx_warn("read from i2c device at 0x%x timed out\n", addr);
/* get the received message */
ret = dev->em28xx_read_reg_req_len(dev, 0x00, 4-len, buf2, len);
if (ret != len) {
em28xx_warn("reading from i2c device at 0x%x failed: "
"couldn't get the received message from the bridge "
"(error=%i)\n", addr, ret);
return (ret < 0) ? ret : -EIO;
}
for (i = 0; i < len; i++)
buf[i] = buf2[len - 1 - i];
return ret;
}
/*
* em2800_i2c_check_for_device()
* check if there is an i2c device at the supplied address
*/
static int em2800_i2c_check_for_device(struct em28xx *dev, u8 addr)
{
u8 buf;
int ret;
ret = em2800_i2c_recv_bytes(dev, addr, &buf, 1);
if (ret == 1)
return 0;
return (ret < 0) ? ret : -EIO;
}
/*
* em28xx_i2c_send_bytes()
*/
static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
u16 len, int stop)
{
int write_timeout, ret;
if (len < 1 || len > 64)
return -EOPNOTSUPP;
/* NOTE: limited by the USB ctrl message constraints
* Zero length reads always succeed, even if no device is connected */
/* Write to i2c device */
ret = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len);
if (ret != len) {
if (ret < 0) {
em28xx_warn("writing to i2c device at 0x%x failed "
"(error=%i)\n", addr, ret);
return ret;
} else {
em28xx_warn("%i bytes write to i2c device at 0x%x "
"requested, but %i bytes written\n",
len, addr, ret);
return -EIO;
}
}
/* Check success of the i2c operation */
for (write_timeout = EM2800_I2C_XFER_TIMEOUT; write_timeout > 0;
write_timeout -= 5) {
ret = dev->em28xx_read_reg(dev, 0x05);
if (ret == 0) { /* success */
return len;
} else if (ret == 0x10) {
return -ENODEV;
} else if (ret < 0) {
em28xx_warn("failed to read i2c transfer status from "
"bridge (error=%i)\n", ret);
return ret;
}
msleep(5);
/* NOTE: do we really have to wait for success ?
Never seen anything else than 0x00 or 0x10
(even with high payload) ... */
}
em28xx_warn("write to i2c device at 0x%x timed out\n", addr);
return -EIO;
}
/*
* em28xx_i2c_recv_bytes()
* read a byte from the i2c device
*/
static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len)
{
int ret;
if (len < 1 || len > 64)
return -EOPNOTSUPP;
/* NOTE: limited by the USB ctrl message constraints
* Zero length reads always succeed, even if no device is connected */
/* Read data from i2c device */
ret = dev->em28xx_read_reg_req_len(dev, 2, addr, buf, len);
if (ret != len) {
if (ret < 0) {
em28xx_warn("reading from i2c device at 0x%x failed "
"(error=%i)\n", addr, ret);
return ret;
} else {
em28xx_warn("%i bytes requested from i2c device at "
"0x%x, but %i bytes received\n",
len, addr, ret);
return -EIO;
}
}
/* Check success of the i2c operation */
ret = dev->em28xx_read_reg(dev, 0x05);
if (ret < 0) {
em28xx_warn("failed to read i2c transfer status from "
"bridge (error=%i)\n", ret);
return ret;
}
if (ret > 0) {
if (ret == 0x10) {
return -ENODEV;
} else {
em28xx_warn("unknown i2c error (status=%i)\n", ret);
return -EIO;
}
}
return len;
}
/*
* em28xx_i2c_check_for_device()
* check if there is a i2c_device at the supplied address
*/
static int em28xx_i2c_check_for_device(struct em28xx *dev, u16 addr)
{
int ret;
u8 buf;
ret = em28xx_i2c_recv_bytes(dev, addr, &buf, 1);
if (ret == 1)
return 0;
return (ret < 0) ? ret : -EIO;
}
/*
* em28xx_i2c_xfer()
* the main i2c transfer function
*/
static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
struct i2c_msg msgs[], int num)
{
struct em28xx *dev = i2c_adap->algo_data;
int addr, rc, i, byte;
if (num <= 0)
return 0;
for (i = 0; i < num; i++) {
addr = msgs[i].addr << 1;
dprintk2(2, "%s %s addr=%x len=%d:",
(msgs[i].flags & I2C_M_RD) ? "read" : "write",
i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
if (!msgs[i].len) { /* no len: check only for device presence */
if (dev->board.is_em2800)
rc = em2800_i2c_check_for_device(dev, addr);
else
rc = em28xx_i2c_check_for_device(dev, addr);
if (rc == -ENODEV) {
if (i2c_debug >= 2)
printk(" no device\n");
return rc;
}
} else if (msgs[i].flags & I2C_M_RD) {
/* read bytes */
if (dev->board.is_em2800)
rc = em2800_i2c_recv_bytes(dev, addr,
msgs[i].buf,
msgs[i].len);
else
rc = em28xx_i2c_recv_bytes(dev, addr,
msgs[i].buf,
msgs[i].len);
if (i2c_debug >= 2) {
for (byte = 0; byte < msgs[i].len; byte++)
printk(" %02x", msgs[i].buf[byte]);
}
} else {
/* write bytes */
if (i2c_debug >= 2) {
for (byte = 0; byte < msgs[i].len; byte++)
printk(" %02x", msgs[i].buf[byte]);
}
if (dev->board.is_em2800)
rc = em2800_i2c_send_bytes(dev, addr,
msgs[i].buf,
msgs[i].len);
else
rc = em28xx_i2c_send_bytes(dev, addr,
msgs[i].buf,
msgs[i].len,
i == num - 1);
}
if (rc < 0) {
if (i2c_debug >= 2)
printk(" ERROR: %i\n", rc);
return rc;
}
if (i2c_debug >= 2)
printk("\n");
}
return num;
}
/* based on linux/sunrpc/svcauth.h and linux/hash.h
* The original hash function returns a different value, if arch is x86_64
* or i386.
*/
static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits)
{
unsigned long hash = 0;
unsigned long l = 0;
int len = 0;
unsigned char c;
do {
if (len == length) {
c = (char)len;
len = -1;
} else
c = *buf++;
l = (l << 8) | c;
len++;
if ((len & (32 / 8 - 1)) == 0)
hash = ((hash^l) * 0x9e370001UL);
} while (len);
return (hash >> (32 - bits)) & 0xffffffffUL;
}
static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
{
unsigned char buf, *p = eedata;
struct em28xx_eeprom *em_eeprom = (void *)eedata;
int i, err, size = len, block, block_max;
if (dev->chip_id == CHIP_ID_EM2874 ||
dev->chip_id == CHIP_ID_EM28174 ||
dev->chip_id == CHIP_ID_EM2884) {
/* Empia switched to a 16-bit addressable eeprom in newer
devices. While we could certainly write a routine to read
the eeprom, there is nothing of use in there that cannot be
accessed through registers, and there is the risk that we
could corrupt the eeprom (since a 16-bit read call is
interpreted as a write call by 8-bit eeproms).
*/
return 0;
}
dev->i2c_client.addr = 0xa0 >> 1;
/* Check if board has eeprom */
err = i2c_master_recv(&dev->i2c_client, &buf, 0);
if (err < 0) {
em28xx_errdev("board has no eeprom\n");
memset(eedata, 0, len);
return -ENODEV;
}
buf = 0;
err = i2c_master_send(&dev->i2c_client, &buf, 1);
if (err != 1) {
printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
dev->name, err);
return err;
}
if (dev->board.is_em2800)
block_max = 4;
else
block_max = 64;
while (size > 0) {
if (size > block_max)
block = block_max;
else
block = size;
if (block !=
(err = i2c_master_recv(&dev->i2c_client, p, block))) {
printk(KERN_WARNING
"%s: i2c eeprom read error (err=%d)\n",
dev->name, err);
return err;
}
size -= block;
p += block;
}
for (i = 0; i < len; i++) {
if (0 == (i % 16))
printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i);
printk(" %02x", eedata[i]);
if (15 == (i % 16))
printk("\n");
}
if (em_eeprom->id == 0x9567eb1a)
dev->hash = em28xx_hash_mem(eedata, len, 32);
printk(KERN_INFO "%s: EEPROM ID= 0x%08x, EEPROM hash = 0x%08lx\n",
dev->name, em_eeprom->id, dev->hash);
printk(KERN_INFO "%s: EEPROM info:\n", dev->name);
switch (em_eeprom->chip_conf >> 4 & 0x3) {
case 0:
printk(KERN_INFO "%s:\tNo audio on board.\n", dev->name);
break;
case 1:
printk(KERN_INFO "%s:\tAC97 audio (5 sample rates)\n",
dev->name);
break;
case 2:
printk(KERN_INFO "%s:\tI2S audio, sample rate=32k\n",
dev->name);
break;
case 3:
printk(KERN_INFO "%s:\tI2S audio, 3 sample rates\n",
dev->name);
break;
}
if (em_eeprom->chip_conf & 1 << 3)
printk(KERN_INFO "%s:\tUSB Remote wakeup capable\n", dev->name);
if (em_eeprom->chip_conf & 1 << 2)
printk(KERN_INFO "%s:\tUSB Self power capable\n", dev->name);
switch (em_eeprom->chip_conf & 0x3) {
case 0:
printk(KERN_INFO "%s:\t500mA max power\n", dev->name);
break;
case 1:
printk(KERN_INFO "%s:\t400mA max power\n", dev->name);
break;
case 2:
printk(KERN_INFO "%s:\t300mA max power\n", dev->name);
break;
case 3:
printk(KERN_INFO "%s:\t200mA max power\n", dev->name);
break;
}
printk(KERN_INFO "%s:\tTable at 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
dev->name,
em_eeprom->string_idx_table,
em_eeprom->string1,
em_eeprom->string2,
em_eeprom->string3);
return 0;
}
/* ----------------------------------------------------------- */
/*
* functionality()
*/
static u32 functionality(struct i2c_adapter *adap)
{
struct em28xx *dev = adap->algo_data;
u32 func_flags = I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
if (dev->board.is_em2800)
func_flags &= ~I2C_FUNC_SMBUS_WRITE_BLOCK_DATA;
return func_flags;
}
static struct i2c_algorithm em28xx_algo = {
.master_xfer = em28xx_i2c_xfer,
.functionality = functionality,
};
static struct i2c_adapter em28xx_adap_template = {
.owner = THIS_MODULE,
.name = "em28xx",
.algo = &em28xx_algo,
};
static struct i2c_client em28xx_client_template = {
.name = "em28xx internal",
};
/* ----------------------------------------------------------- */
/*
* i2c_devs
* incomplete list of known devices
*/
static char *i2c_devs[128] = {
[0x3e >> 1] = "remote IR sensor",
[0x4a >> 1] = "saa7113h",
[0x52 >> 1] = "drxk",
[0x60 >> 1] = "remote IR sensor",
[0x8e >> 1] = "remote IR sensor",
[0x86 >> 1] = "tda9887",
[0x80 >> 1] = "msp34xx",
[0x88 >> 1] = "msp34xx",
[0xa0 >> 1] = "eeprom",
[0xb0 >> 1] = "tda9874",
[0xb8 >> 1] = "tvp5150a",
[0xba >> 1] = "webcam sensor or tvp5150a",
[0xc0 >> 1] = "tuner (analog)",
[0xc2 >> 1] = "tuner (analog)",
[0xc4 >> 1] = "tuner (analog)",
[0xc6 >> 1] = "tuner (analog)",
};
/*
* do_i2c_scan()
* check i2c address range for devices
*/
void em28xx_do_i2c_scan(struct em28xx *dev)
{
u8 i2c_devicelist[128];
unsigned char buf;
int i, rc;
memset(i2c_devicelist, 0, ARRAY_SIZE(i2c_devicelist));
for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) {
dev->i2c_client.addr = i;
rc = i2c_master_recv(&dev->i2c_client, &buf, 0);
if (rc < 0)
continue;
i2c_devicelist[i] = i;
printk(KERN_INFO "%s: found i2c device @ 0x%x [%s]\n",
dev->name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
}
dev->i2c_hash = em28xx_hash_mem(i2c_devicelist,
ARRAY_SIZE(i2c_devicelist), 32);
}
/*
* em28xx_i2c_register()
* register i2c bus
*/
int em28xx_i2c_register(struct em28xx *dev)
{
int retval;
BUG_ON(!dev->em28xx_write_regs || !dev->em28xx_read_reg);
BUG_ON(!dev->em28xx_write_regs_req || !dev->em28xx_read_reg_req);
dev->i2c_adap = em28xx_adap_template;
dev->i2c_adap.dev.parent = &dev->udev->dev;
strcpy(dev->i2c_adap.name, dev->name);
dev->i2c_adap.algo_data = dev;
i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
retval = i2c_add_adapter(&dev->i2c_adap);
if (retval < 0) {
em28xx_errdev("%s: i2c_add_adapter failed! retval [%d]\n",
__func__, retval);
return retval;
}
dev->i2c_client = em28xx_client_template;
dev->i2c_client.adapter = &dev->i2c_adap;
retval = em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata));
if ((retval < 0) && (retval != -ENODEV)) {
em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n",
__func__, retval);
return retval;
}
if (i2c_scan)
em28xx_do_i2c_scan(dev);
return 0;
}
/*
* em28xx_i2c_unregister()
* unregister i2c_bus
*/
int em28xx_i2c_unregister(struct em28xx *dev)
{
i2c_del_adapter(&dev->i2c_adap);
return 0;
}
|