Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 | /*
* ADIS16080/100 Yaw Rate Gyroscope with SPI driver
*
* Copyright 2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/module.h>
#include "../iio.h"
#include "../sysfs.h"
#define ADIS16080_DIN_GYRO (0 << 10) /* Gyroscope output */
#define ADIS16080_DIN_TEMP (1 << 10) /* Temperature output */
#define ADIS16080_DIN_AIN1 (2 << 10)
#define ADIS16080_DIN_AIN2 (3 << 10)
/*
* 1: Write contents on DIN to control register.
* 0: No changes to control register.
*/
#define ADIS16080_DIN_WRITE (1 << 15)
/**
* struct adis16080_state - device instance specific data
* @us: actual spi_device to write data
* @buf: transmit or receive buffer
* @buf_lock: mutex to protect tx and rx
**/
struct adis16080_state {
struct spi_device *us;
struct mutex buf_lock;
u8 buf[2] ____cacheline_aligned;
};
static int adis16080_spi_write(struct iio_dev *indio_dev,
u16 val)
{
int ret;
struct adis16080_state *st = iio_priv(indio_dev);
mutex_lock(&st->buf_lock);
st->buf[0] = val >> 8;
st->buf[1] = val;
ret = spi_write(st->us, st->buf, 2);
mutex_unlock(&st->buf_lock);
return ret;
}
static int adis16080_spi_read(struct iio_dev *indio_dev,
u16 *val)
{
int ret;
struct adis16080_state *st = iio_priv(indio_dev);
mutex_lock(&st->buf_lock);
ret = spi_read(st->us, st->buf, 2);
if (ret == 0)
*val = ((st->buf[0] & 0xF) << 8) | st->buf[1];
mutex_unlock(&st->buf_lock);
return ret;
}
static int adis16080_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
int *val2,
long mask)
{
int ret = -EINVAL;
u16 ut;
/* Take the iio_dev status lock */
mutex_lock(&indio_dev->mlock);
switch (mask) {
case 0:
ret = adis16080_spi_write(indio_dev,
chan->address |
ADIS16080_DIN_WRITE);
if (ret < 0)
break;
ret = adis16080_spi_read(indio_dev, &ut);
if (ret < 0)
break;
*val = ut;
ret = IIO_VAL_INT;
break;
}
mutex_unlock(&indio_dev->mlock);
return ret;
}
static const struct iio_chan_spec adis16080_channels[] = {
{
.type = IIO_ANGL_VEL,
.modified = 1,
.channel2 = IIO_MOD_Z,
.address = ADIS16080_DIN_GYRO,
}, {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
.address = ADIS16080_DIN_AIN1,
}, {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 1,
.address = ADIS16080_DIN_AIN2,
}, {
.type = IIO_TEMP,
.indexed = 1,
.channel = 0,
.address = ADIS16080_DIN_TEMP,
}
};
static const struct iio_info adis16080_info = {
.read_raw = &adis16080_read_raw,
.driver_module = THIS_MODULE,
};
static int __devinit adis16080_probe(struct spi_device *spi)
{
int ret;
struct adis16080_state *st;
struct iio_dev *indio_dev;
/* setup the industrialio driver allocated elements */
indio_dev = iio_allocate_device(sizeof(*st));
if (indio_dev == NULL) {
ret = -ENOMEM;
goto error_ret;
}
st = iio_priv(indio_dev);
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
/* Allocate the comms buffers */
st->us = spi;
mutex_init(&st->buf_lock);
indio_dev->name = spi->dev.driver->name;
indio_dev->channels = adis16080_channels;
indio_dev->num_channels = ARRAY_SIZE(adis16080_channels);
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &adis16080_info;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = iio_device_register(indio_dev);
if (ret)
goto error_free_dev;
return 0;
error_free_dev:
iio_free_device(indio_dev);
error_ret:
return ret;
}
/* fixme, confirm ordering in this function */
static int adis16080_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
iio_free_device(spi_get_drvdata(spi));
return 0;
}
static struct spi_driver adis16080_driver = {
.driver = {
.name = "adis16080",
.owner = THIS_MODULE,
},
.probe = adis16080_probe,
.remove = __devexit_p(adis16080_remove),
};
static __init int adis16080_init(void)
{
return spi_register_driver(&adis16080_driver);
}
module_init(adis16080_init);
static __exit void adis16080_exit(void)
{
spi_unregister_driver(&adis16080_driver);
}
module_exit(adis16080_exit);
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16080/100 Yaw Rate Gyroscope Driver");
MODULE_LICENSE("GPL v2");
|