Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 | /*
* PCI bus driver for Bosch C_CAN/D_CAN controller
*
* Copyright (C) 2012 Federico Vaga <federico.vaga@gmail.com>
*
* Borrowed from c_can_platform.c
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/can/dev.h>
#include "c_can.h"
enum c_can_pci_reg_align {
C_CAN_REG_ALIGN_16,
C_CAN_REG_ALIGN_32,
};
struct c_can_pci_data {
/* Specify if is C_CAN or D_CAN */
enum c_can_dev_id type;
/* Set the register alignment in the memory */
enum c_can_pci_reg_align reg_align;
/* Set the frequency */
unsigned int freq;
};
/*
* 16-bit c_can registers can be arranged differently in the memory
* architecture of different implementations. For example: 16-bit
* registers can be aligned to a 16-bit boundary or 32-bit boundary etc.
* Handle the same by providing a common read/write interface.
*/
static u16 c_can_pci_read_reg_aligned_to_16bit(struct c_can_priv *priv,
enum reg index)
{
return readw(priv->base + priv->regs[index]);
}
static void c_can_pci_write_reg_aligned_to_16bit(struct c_can_priv *priv,
enum reg index, u16 val)
{
writew(val, priv->base + priv->regs[index]);
}
static u16 c_can_pci_read_reg_aligned_to_32bit(struct c_can_priv *priv,
enum reg index)
{
return readw(priv->base + 2 * priv->regs[index]);
}
static void c_can_pci_write_reg_aligned_to_32bit(struct c_can_priv *priv,
enum reg index, u16 val)
{
writew(val, priv->base + 2 * priv->regs[index]);
}
static int c_can_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct c_can_pci_data *c_can_pci_data = (void *)ent->driver_data;
struct c_can_priv *priv;
struct net_device *dev;
void __iomem *addr;
int ret;
ret = pci_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "pci_enable_device FAILED\n");
goto out;
}
ret = pci_request_regions(pdev, KBUILD_MODNAME);
if (ret) {
dev_err(&pdev->dev, "pci_request_regions FAILED\n");
goto out_disable_device;
}
pci_set_master(pdev);
pci_enable_msi(pdev);
addr = pci_iomap(pdev, 0, pci_resource_len(pdev, 0));
if (!addr) {
dev_err(&pdev->dev,
"device has no PCI memory resources, "
"failing adapter\n");
ret = -ENOMEM;
goto out_release_regions;
}
/* allocate the c_can device */
dev = alloc_c_can_dev();
if (!dev) {
ret = -ENOMEM;
goto out_iounmap;
}
priv = netdev_priv(dev);
pci_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
dev->irq = pdev->irq;
priv->base = addr;
if (!c_can_pci_data->freq) {
dev_err(&pdev->dev, "no clock frequency defined\n");
ret = -ENODEV;
goto out_free_c_can;
} else {
priv->can.clock.freq = c_can_pci_data->freq;
}
/* Configure CAN type */
switch (c_can_pci_data->type) {
case BOSCH_C_CAN:
priv->regs = reg_map_c_can;
break;
case BOSCH_D_CAN:
priv->regs = reg_map_d_can;
priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
break;
default:
ret = -EINVAL;
goto out_free_c_can;
}
/* Configure access to registers */
switch (c_can_pci_data->reg_align) {
case C_CAN_REG_ALIGN_32:
priv->read_reg = c_can_pci_read_reg_aligned_to_32bit;
priv->write_reg = c_can_pci_write_reg_aligned_to_32bit;
break;
case C_CAN_REG_ALIGN_16:
priv->read_reg = c_can_pci_read_reg_aligned_to_16bit;
priv->write_reg = c_can_pci_write_reg_aligned_to_16bit;
break;
default:
ret = -EINVAL;
goto out_free_c_can;
}
ret = register_c_can_dev(dev);
if (ret) {
dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
KBUILD_MODNAME, ret);
goto out_free_c_can;
}
dev_dbg(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n",
KBUILD_MODNAME, priv->regs, dev->irq);
return 0;
out_free_c_can:
free_c_can_dev(dev);
out_iounmap:
pci_iounmap(pdev, addr);
out_release_regions:
pci_disable_msi(pdev);
pci_clear_master(pdev);
pci_release_regions(pdev);
out_disable_device:
pci_disable_device(pdev);
out:
return ret;
}
static void c_can_pci_remove(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct c_can_priv *priv = netdev_priv(dev);
unregister_c_can_dev(dev);
free_c_can_dev(dev);
pci_iounmap(pdev, priv->base);
pci_disable_msi(pdev);
pci_clear_master(pdev);
pci_release_regions(pdev);
pci_disable_device(pdev);
}
static struct c_can_pci_data c_can_sta2x11= {
.type = BOSCH_C_CAN,
.reg_align = C_CAN_REG_ALIGN_32,
.freq = 52000000, /* 52 Mhz */
};
#define C_CAN_ID(_vend, _dev, _driverdata) { \
PCI_DEVICE(_vend, _dev), \
.driver_data = (unsigned long)&_driverdata, \
}
static DEFINE_PCI_DEVICE_TABLE(c_can_pci_tbl) = {
C_CAN_ID(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_CAN,
c_can_sta2x11),
{},
};
static struct pci_driver c_can_pci_driver = {
.name = KBUILD_MODNAME,
.id_table = c_can_pci_tbl,
.probe = c_can_pci_probe,
.remove = c_can_pci_remove,
};
module_pci_driver(c_can_pci_driver);
MODULE_AUTHOR("Federico Vaga <federico.vaga@gmail.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("PCI CAN bus driver for Bosch C_CAN/D_CAN controller");
MODULE_DEVICE_TABLE(pci, c_can_pci_tbl);
|