Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 | /*
* vrl4 format generator
*
* Copyright (C) 2010 Simon Horman
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
/*
* usage: vrl4 < zImage > out
* dd if=out of=/dev/sdx bs=512 seek=1 # Write the image to sector 1
*
* Reads a zImage from stdin and writes a vrl4 image to stdout.
* In practice this means writing a padded vrl4 header to stdout followed
* by the zImage.
*
* The padding places the zImage at ALIGN bytes into the output.
* The vrl4 uses ALIGN + START_BASE as the start_address.
* This is where the mask ROM will jump to after verifying the header.
*
* The header sets copy_size to min(sizeof(zImage), MAX_BOOT_PROG_LEN) + ALIGN.
* That is, the mask ROM will load the padded header (ALIGN bytes)
* And then MAX_BOOT_PROG_LEN bytes of the image, or the entire image,
* whichever is smaller.
*
* The zImage is not modified in any way.
*/
#define _BSD_SOURCE
#include <endian.h>
#include <unistd.h>
#include <stdint.h>
#include <stdio.h>
#include <errno.h>
struct hdr {
uint32_t magic1;
uint32_t reserved1;
uint32_t magic2;
uint32_t reserved2;
uint16_t copy_size;
uint16_t boot_options;
uint32_t reserved3;
uint32_t start_address;
uint32_t reserved4;
uint32_t reserved5;
char reserved6[308];
};
#define DECLARE_HDR(h) \
struct hdr (h) = { \
.magic1 = htole32(0xea000000), \
.reserved1 = htole32(0x56), \
.magic2 = htole32(0xe59ff008), \
.reserved3 = htole16(0x1) }
/* Align to 512 bytes, the MMCIF sector size */
#define ALIGN_BITS 9
#define ALIGN (1 << ALIGN_BITS)
#define START_BASE 0xe55b0000
/*
* With an alignment of 512 the header uses the first sector.
* There is a 128 sector (64kbyte) limit on the data loaded by the mask ROM.
* So there are 127 sectors left for the boot programme. But in practice
* Only a small portion of a zImage is needed, 16 sectors should be more
* than enough.
*
* Note that this sets how much of the zImage is copied by the mask ROM.
* The entire zImage is present after the header and is loaded
* by the code in the boot program (which is the first portion of the zImage).
*/
#define MAX_BOOT_PROG_LEN (16 * 512)
#define ROUND_UP(x) ((x + ALIGN - 1) & ~(ALIGN - 1))
ssize_t do_read(int fd, void *buf, size_t count)
{
size_t offset = 0;
ssize_t l;
while (offset < count) {
l = read(fd, buf + offset, count - offset);
if (!l)
break;
if (l < 0) {
if (errno == EAGAIN || errno == EWOULDBLOCK)
continue;
perror("read");
return -1;
}
offset += l;
}
return offset;
}
ssize_t do_write(int fd, const void *buf, size_t count)
{
size_t offset = 0;
ssize_t l;
while (offset < count) {
l = write(fd, buf + offset, count - offset);
if (l < 0) {
if (errno == EAGAIN || errno == EWOULDBLOCK)
continue;
perror("write");
return -1;
}
offset += l;
}
return offset;
}
ssize_t write_zero(int fd, size_t len)
{
size_t i = len;
while (i--) {
const char x = 0;
if (do_write(fd, &x, 1) < 0)
return -1;
}
return len;
}
int main(void)
{
DECLARE_HDR(hdr);
char boot_program[MAX_BOOT_PROG_LEN];
size_t aligned_hdr_len, alligned_prog_len;
ssize_t prog_len;
prog_len = do_read(0, boot_program, sizeof(boot_program));
if (prog_len <= 0)
return -1;
aligned_hdr_len = ROUND_UP(sizeof(hdr));
hdr.start_address = htole32(START_BASE + aligned_hdr_len);
alligned_prog_len = ROUND_UP(prog_len);
hdr.copy_size = htole16(aligned_hdr_len + alligned_prog_len);
if (do_write(1, &hdr, sizeof(hdr)) < 0)
return -1;
if (write_zero(1, aligned_hdr_len - sizeof(hdr)) < 0)
return -1;
if (do_write(1, boot_program, prog_len) < 0)
return 1;
/* Write out the rest of the kernel */
while (1) {
prog_len = do_read(0, boot_program, sizeof(boot_program));
if (prog_len < 0)
return 1;
if (prog_len == 0)
break;
if (do_write(1, boot_program, prog_len) < 0)
return 1;
}
return 0;
}
|