Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 | /*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Parts of this file are based on Ralink's 2.6.21 BSP
*
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
* Copyright (C) 2013 John Crispin <blogic@openwrt.org>
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <asm/mipsregs.h>
#include <asm/mach-ralink/ralink_regs.h>
#include <asm/mach-ralink/rt288x.h>
#include "common.h"
static struct ralink_pinmux_grp mode_mux[] = {
{
.name = "i2c",
.mask = RT2880_GPIO_MODE_I2C,
.gpio_first = 1,
.gpio_last = 2,
}, {
.name = "spi",
.mask = RT2880_GPIO_MODE_SPI,
.gpio_first = 3,
.gpio_last = 6,
}, {
.name = "uartlite",
.mask = RT2880_GPIO_MODE_UART0,
.gpio_first = 7,
.gpio_last = 14,
}, {
.name = "jtag",
.mask = RT2880_GPIO_MODE_JTAG,
.gpio_first = 17,
.gpio_last = 21,
}, {
.name = "mdio",
.mask = RT2880_GPIO_MODE_MDIO,
.gpio_first = 22,
.gpio_last = 23,
}, {
.name = "sdram",
.mask = RT2880_GPIO_MODE_SDRAM,
.gpio_first = 24,
.gpio_last = 39,
}, {
.name = "pci",
.mask = RT2880_GPIO_MODE_PCI,
.gpio_first = 40,
.gpio_last = 71,
}, {0}
};
static void rt288x_wdt_reset(void)
{
u32 t;
/* enable WDT reset output on pin SRAM_CS_N */
t = rt_sysc_r32(SYSC_REG_CLKCFG);
t |= CLKCFG_SRAM_CS_N_WDT;
rt_sysc_w32(t, SYSC_REG_CLKCFG);
}
struct ralink_pinmux rt_gpio_pinmux = {
.mode = mode_mux,
.wdt_reset = rt288x_wdt_reset,
};
void __init ralink_clk_init(void)
{
unsigned long cpu_rate;
u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
switch (t) {
case SYSTEM_CONFIG_CPUCLK_250:
cpu_rate = 250000000;
break;
case SYSTEM_CONFIG_CPUCLK_266:
cpu_rate = 266666667;
break;
case SYSTEM_CONFIG_CPUCLK_280:
cpu_rate = 280000000;
break;
case SYSTEM_CONFIG_CPUCLK_300:
cpu_rate = 300000000;
break;
}
ralink_clk_add("cpu", cpu_rate);
ralink_clk_add("300100.timer", cpu_rate / 2);
ralink_clk_add("300120.watchdog", cpu_rate / 2);
ralink_clk_add("300500.uart", cpu_rate / 2);
ralink_clk_add("300c00.uartlite", cpu_rate / 2);
ralink_clk_add("400000.ethernet", cpu_rate / 2);
}
void __init ralink_of_remap(void)
{
rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc");
rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc");
if (!rt_sysc_membase || !rt_memc_membase)
panic("Failed to remap core resources");
}
void prom_soc_init(struct ralink_soc_info *soc_info)
{
void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
const char *name;
u32 n0;
u32 n1;
u32 id;
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) {
soc_info->compatible = "ralink,r2880-soc";
name = "RT2880";
} else {
panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1);
}
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
"Ralink %s id:%u rev:%u",
name,
(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
(id & CHIP_ID_REV_MASK));
soc_info->mem_base = RT2880_SDRAM_BASE;
soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
}
|