Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 | /*
* CAN bus driver for the Freescale MPC5xxx embedded CPU.
*
* Copyright (C) 2004-2005 Andrey Volkov <avolkov@varma-el.com>,
* Varma Electronics Oy
* Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
* Copyright (C) 2009 Wolfram Sang, Pengutronix <w.sang@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the version 2 of the GNU General Public License
* as published by the Free Software Foundation
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/netdevice.h>
#include <linux/can/dev.h>
#include <linux/of_platform.h>
#include <sysdev/fsl_soc.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <asm/mpc52xx.h>
#include "mscan.h"
#define DRV_NAME "mpc5xxx_can"
struct mpc5xxx_can_data {
unsigned int type;
u32 (*get_clock)(struct platform_device *ofdev, const char *clock_name,
int *mscan_clksrc);
void (*put_clock)(struct platform_device *ofdev);
};
#ifdef CONFIG_PPC_MPC52xx
static struct of_device_id mpc52xx_cdm_ids[] = {
{ .compatible = "fsl,mpc5200-cdm", },
{}
};
static u32 mpc52xx_can_get_clock(struct platform_device *ofdev,
const char *clock_name, int *mscan_clksrc)
{
unsigned int pvr;
struct mpc52xx_cdm __iomem *cdm;
struct device_node *np_cdm;
unsigned int freq;
u32 val;
pvr = mfspr(SPRN_PVR);
/*
* Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock
* (IP_CLK) can be selected as MSCAN clock source. According to
* the MPC5200 user's manual, the oscillator clock is the better
* choice as it has less jitter. For this reason, it is selected
* by default. Unfortunately, it can not be selected for the old
* MPC5200 Rev. A chips due to a hardware bug (check errata).
*/
if (clock_name && strcmp(clock_name, "ip") == 0)
*mscan_clksrc = MSCAN_CLKSRC_BUS;
else
*mscan_clksrc = MSCAN_CLKSRC_XTAL;
freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
if (!freq)
return 0;
if (*mscan_clksrc == MSCAN_CLKSRC_BUS || pvr == 0x80822011)
return freq;
/* Determine SYS_XTAL_IN frequency from the clock domain settings */
np_cdm = of_find_matching_node(NULL, mpc52xx_cdm_ids);
if (!np_cdm) {
dev_err(&ofdev->dev, "can't get clock node!\n");
return 0;
}
cdm = of_iomap(np_cdm, 0);
if (in_8(&cdm->ipb_clk_sel) & 0x1)
freq *= 2;
val = in_be32(&cdm->rstcfg);
freq *= (val & (1 << 5)) ? 8 : 4;
freq /= (val & (1 << 6)) ? 12 : 16;
of_node_put(np_cdm);
iounmap(cdm);
return freq;
}
#else /* !CONFIG_PPC_MPC52xx */
static u32 mpc52xx_can_get_clock(struct platform_device *ofdev,
const char *clock_name, int *mscan_clksrc)
{
return 0;
}
#endif /* CONFIG_PPC_MPC52xx */
#ifdef CONFIG_PPC_MPC512x
struct mpc512x_clockctl {
u32 spmr; /* System PLL Mode Reg */
u32 sccr[2]; /* System Clk Ctrl Reg 1 & 2 */
u32 scfr1; /* System Clk Freq Reg 1 */
u32 scfr2; /* System Clk Freq Reg 2 */
u32 reserved;
u32 bcr; /* Bread Crumb Reg */
u32 pccr[12]; /* PSC Clk Ctrl Reg 0-11 */
u32 spccr; /* SPDIF Clk Ctrl Reg */
u32 cccr; /* CFM Clk Ctrl Reg */
u32 dccr; /* DIU Clk Cnfg Reg */
u32 mccr[4]; /* MSCAN Clk Ctrl Reg 1-3 */
};
static struct of_device_id mpc512x_clock_ids[] = {
{ .compatible = "fsl,mpc5121-clock", },
{}
};
static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
const char *clock_name, int *mscan_clksrc)
{
struct mpc512x_clockctl __iomem *clockctl;
struct device_node *np_clock;
struct clk *sys_clk, *ref_clk;
int plen, clockidx, clocksrc = -1;
u32 sys_freq, val, clockdiv = 1, freq = 0;
const u32 *pval;
np_clock = of_find_matching_node(NULL, mpc512x_clock_ids);
if (!np_clock) {
dev_err(&ofdev->dev, "couldn't find clock node\n");
return 0;
}
clockctl = of_iomap(np_clock, 0);
if (!clockctl) {
dev_err(&ofdev->dev, "couldn't map clock registers\n");
goto exit_put;
}
/* Determine the MSCAN device index from the peripheral's
* physical address. Register address offsets against the
* IMMR base are: 0x1300, 0x1380, 0x2300, 0x2380
*/
pval = of_get_property(ofdev->dev.of_node, "reg", &plen);
BUG_ON(!pval || plen < sizeof(*pval));
clockidx = (*pval & 0x80) ? 1 : 0;
if (*pval & 0x2000)
clockidx += 2;
/*
* Clock source and divider selection: 3 different clock sources
* can be selected: "ip", "ref" or "sys". For the latter two, a
* clock divider can be defined as well. If the clock source is
* not specified by the device tree, we first try to find an
* optimal CAN source clock based on the system clock. If that
* is not posslible, the reference clock will be used.
*/
if (clock_name && !strcmp(clock_name, "ip")) {
*mscan_clksrc = MSCAN_CLKSRC_IPS;
freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
} else {
*mscan_clksrc = MSCAN_CLKSRC_BUS;
pval = of_get_property(ofdev->dev.of_node,
"fsl,mscan-clock-divider", &plen);
if (pval && plen == sizeof(*pval))
clockdiv = *pval;
if (!clockdiv)
clockdiv = 1;
if (!clock_name || !strcmp(clock_name, "sys")) {
sys_clk = devm_clk_get(&ofdev->dev, "sys_clk");
if (IS_ERR(sys_clk)) {
dev_err(&ofdev->dev, "couldn't get sys_clk\n");
goto exit_unmap;
}
/* Get and round up/down sys clock rate */
sys_freq = 1000000 *
((clk_get_rate(sys_clk) + 499999) / 1000000);
if (!clock_name) {
/* A multiple of 16 MHz would be optimal */
if ((sys_freq % 16000000) == 0) {
clocksrc = 0;
clockdiv = sys_freq / 16000000;
freq = sys_freq / clockdiv;
}
} else {
clocksrc = 0;
freq = sys_freq / clockdiv;
}
}
if (clocksrc < 0) {
ref_clk = devm_clk_get(&ofdev->dev, "ref_clk");
if (IS_ERR(ref_clk)) {
dev_err(&ofdev->dev, "couldn't get ref_clk\n");
goto exit_unmap;
}
clocksrc = 1;
freq = clk_get_rate(ref_clk) / clockdiv;
}
}
/* Disable clock */
out_be32(&clockctl->mccr[clockidx], 0x0);
if (clocksrc >= 0) {
/* Set source and divider */
val = (clocksrc << 14) | ((clockdiv - 1) << 17);
out_be32(&clockctl->mccr[clockidx], val);
/* Enable clock */
out_be32(&clockctl->mccr[clockidx], val | 0x10000);
}
/* Enable MSCAN clock domain */
val = in_be32(&clockctl->sccr[1]);
if (!(val & (1 << 25)))
out_be32(&clockctl->sccr[1], val | (1 << 25));
dev_dbg(&ofdev->dev, "using '%s' with frequency divider %d\n",
*mscan_clksrc == MSCAN_CLKSRC_IPS ? "ips_clk" :
clocksrc == 1 ? "ref_clk" : "sys_clk", clockdiv);
exit_unmap:
iounmap(clockctl);
exit_put:
of_node_put(np_clock);
return freq;
}
#else /* !CONFIG_PPC_MPC512x */
static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
const char *clock_name, int *mscan_clksrc)
{
return 0;
}
#endif /* CONFIG_PPC_MPC512x */
static const struct of_device_id mpc5xxx_can_table[];
static int mpc5xxx_can_probe(struct platform_device *ofdev)
{
const struct of_device_id *match;
const struct mpc5xxx_can_data *data;
struct device_node *np = ofdev->dev.of_node;
struct net_device *dev;
struct mscan_priv *priv;
void __iomem *base;
const char *clock_name = NULL;
int irq, mscan_clksrc = 0;
int err = -ENOMEM;
match = of_match_device(mpc5xxx_can_table, &ofdev->dev);
if (!match)
return -EINVAL;
data = match->data;
base = of_iomap(np, 0);
if (!base) {
dev_err(&ofdev->dev, "couldn't ioremap\n");
return err;
}
irq = irq_of_parse_and_map(np, 0);
if (!irq) {
dev_err(&ofdev->dev, "no irq found\n");
err = -ENODEV;
goto exit_unmap_mem;
}
dev = alloc_mscandev();
if (!dev)
goto exit_dispose_irq;
platform_set_drvdata(ofdev, dev);
SET_NETDEV_DEV(dev, &ofdev->dev);
priv = netdev_priv(dev);
priv->reg_base = base;
dev->irq = irq;
clock_name = of_get_property(np, "fsl,mscan-clock-source", NULL);
BUG_ON(!data);
priv->type = data->type;
priv->can.clock.freq = data->get_clock(ofdev, clock_name,
&mscan_clksrc);
if (!priv->can.clock.freq) {
dev_err(&ofdev->dev, "couldn't get MSCAN clock properties\n");
goto exit_free_mscan;
}
err = register_mscandev(dev, mscan_clksrc);
if (err) {
dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
DRV_NAME, err);
goto exit_free_mscan;
}
dev_info(&ofdev->dev, "MSCAN at 0x%p, irq %d, clock %d Hz\n",
priv->reg_base, dev->irq, priv->can.clock.freq);
return 0;
exit_free_mscan:
free_candev(dev);
exit_dispose_irq:
irq_dispose_mapping(irq);
exit_unmap_mem:
iounmap(base);
return err;
}
static int mpc5xxx_can_remove(struct platform_device *ofdev)
{
const struct of_device_id *match;
const struct mpc5xxx_can_data *data;
struct net_device *dev = platform_get_drvdata(ofdev);
struct mscan_priv *priv = netdev_priv(dev);
match = of_match_device(mpc5xxx_can_table, &ofdev->dev);
data = match ? match->data : NULL;
unregister_mscandev(dev);
if (data && data->put_clock)
data->put_clock(ofdev);
iounmap(priv->reg_base);
irq_dispose_mapping(dev->irq);
free_candev(dev);
return 0;
}
#ifdef CONFIG_PM
static struct mscan_regs saved_regs;
static int mpc5xxx_can_suspend(struct platform_device *ofdev, pm_message_t state)
{
struct net_device *dev = platform_get_drvdata(ofdev);
struct mscan_priv *priv = netdev_priv(dev);
struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
_memcpy_fromio(&saved_regs, regs, sizeof(*regs));
return 0;
}
static int mpc5xxx_can_resume(struct platform_device *ofdev)
{
struct net_device *dev = platform_get_drvdata(ofdev);
struct mscan_priv *priv = netdev_priv(dev);
struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
regs->canctl0 |= MSCAN_INITRQ;
while (!(regs->canctl1 & MSCAN_INITAK))
udelay(10);
regs->canctl1 = saved_regs.canctl1;
regs->canbtr0 = saved_regs.canbtr0;
regs->canbtr1 = saved_regs.canbtr1;
regs->canidac = saved_regs.canidac;
/* restore masks, buffers etc. */
_memcpy_toio(®s->canidar1_0, (void *)&saved_regs.canidar1_0,
sizeof(*regs) - offsetof(struct mscan_regs, canidar1_0));
regs->canctl0 &= ~MSCAN_INITRQ;
regs->cantbsel = saved_regs.cantbsel;
regs->canrier = saved_regs.canrier;
regs->cantier = saved_regs.cantier;
regs->canctl0 = saved_regs.canctl0;
return 0;
}
#endif
static const struct mpc5xxx_can_data mpc5200_can_data = {
.type = MSCAN_TYPE_MPC5200,
.get_clock = mpc52xx_can_get_clock,
};
static const struct mpc5xxx_can_data mpc5121_can_data = {
.type = MSCAN_TYPE_MPC5121,
.get_clock = mpc512x_can_get_clock,
};
static const struct of_device_id mpc5xxx_can_table[] = {
{ .compatible = "fsl,mpc5200-mscan", .data = &mpc5200_can_data, },
/* Note that only MPC5121 Rev. 2 (and later) is supported */
{ .compatible = "fsl,mpc5121-mscan", .data = &mpc5121_can_data, },
{},
};
MODULE_DEVICE_TABLE(of, mpc5xxx_can_table);
static struct platform_driver mpc5xxx_can_driver = {
.driver = {
.name = "mpc5xxx_can",
.owner = THIS_MODULE,
.of_match_table = mpc5xxx_can_table,
},
.probe = mpc5xxx_can_probe,
.remove = mpc5xxx_can_remove,
#ifdef CONFIG_PM
.suspend = mpc5xxx_can_suspend,
.resume = mpc5xxx_can_resume,
#endif
};
module_platform_driver(mpc5xxx_can_driver);
MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
MODULE_DESCRIPTION("Freescale MPC5xxx CAN driver");
MODULE_LICENSE("GPL v2");
|