/**
 * Freescale P1022DS ALSA SoC Machine driver
 *
 * Author: Timur Tabi <timur@freescale.com>
 *
 * Copyright 2010 Freescale Semiconductor, Inc.
 *
 * This file is licensed under the terms of the GNU General Public License
 * version 2.  This program is licensed "as is" without any warranty of any
 * kind, whether express or implied.
 */

#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <sound/soc.h>
#include <asm/fsl_guts.h>

#include "fsl_dma.h"
#include "fsl_ssi.h"
#include "fsl_utils.h"

/* P1022-specific PMUXCR and DMUXCR bit definitions */

#define CCSR_GUTS_PMUXCR_UART0_I2C1_MASK	0x0001c000
#define CCSR_GUTS_PMUXCR_UART0_I2C1_UART0_SSI	0x00010000
#define CCSR_GUTS_PMUXCR_UART0_I2C1_SSI		0x00018000

#define CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK	0x00000c00
#define CCSR_GUTS_PMUXCR_SSI_DMA_TDM_SSI	0x00000000

#define CCSR_GUTS_DMUXCR_PAD	1	/* DMA controller/channel set to pad */
#define CCSR_GUTS_DMUXCR_SSI	2	/* DMA controller/channel set to SSI */

/*
 * Set the DMACR register in the GUTS
 *
 * The DMACR register determines the source of initiated transfers for each
 * channel on each DMA controller.  Rather than have a bunch of repetitive
 * macros for the bit patterns, we just have a function that calculates
 * them.
 *
 * guts: Pointer to GUTS structure
 * co: The DMA controller (0 or 1)
 * ch: The channel on the DMA controller (0, 1, 2, or 3)
 * device: The device to set as the target (CCSR_GUTS_DMUXCR_xxx)
 */
static inline void guts_set_dmuxcr(struct ccsr_guts __iomem *guts,
	unsigned int co, unsigned int ch, unsigned int device)
{
	unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));

	clrsetbits_be32(&guts->dmuxcr, 3 << shift, device << shift);
}

/* There's only one global utilities register */
static phys_addr_t guts_phys;

/**
 * machine_data: machine-specific ASoC device data
 *
 * This structure contains data for a single sound platform device on an
 * P1022 DS.  Some of the data is taken from the device tree.
 */
struct machine_data {
	struct snd_soc_dai_link dai[2];
	struct snd_soc_card card;
	unsigned int dai_format;
	unsigned int codec_clk_direction;
	unsigned int cpu_clk_direction;
	unsigned int clk_frequency;
	unsigned int ssi_id;		/* 0 = SSI1, 1 = SSI2, etc */
	unsigned int dma_id[2];		/* 0 = DMA1, 1 = DMA2, etc */
	unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/
	char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */
};

/**
 * p1022_ds_machine_probe: initialize the board
 *
 * This function is used to initialize the board-specific hardware.
 *
 * Here we program the DMACR and PMUXCR registers.
 */
static int p1022_ds_machine_probe(struct snd_soc_card *card)
{
	struct machine_data *mdata =
		container_of(card, struct machine_data, card);
	struct ccsr_guts __iomem *guts;

	guts = ioremap(guts_phys, sizeof(struct ccsr_guts));
	if (!guts) {
		dev_err(card->dev, "could not map global utilities\n");
		return -ENOMEM;
	}

	/* Enable SSI Tx signal */
	clrsetbits_be32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_UART0_I2C1_MASK,
			CCSR_GUTS_PMUXCR_UART0_I2C1_UART0_SSI);

	/* Enable SSI Rx signal */
	clrsetbits_be32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK,
			CCSR_GUTS_PMUXCR_SSI_DMA_TDM_SSI);

	/* Enable DMA Channel for SSI */
	guts_set_dmuxcr(guts, mdata->dma_id[0], mdata->dma_channel_id[0],
			CCSR_GUTS_DMUXCR_SSI);

	guts_set_dmuxcr(guts, mdata->dma_id[1], mdata->dma_channel_id[1],
			CCSR_GUTS_DMUXCR_SSI);

	iounmap(guts);

	return 0;
}

/**
 * p1022_ds_startup: program the board with various hardware parameters
 *
 * This function takes board-specific information, like clock frequencies
 * and serial data formats, and passes that information to the codec and
 * transport drivers.
 */
static int p1022_ds_startup(struct snd_pcm_substream *substream)
{
	struct snd_soc_pcm_runtime *rtd = substream->private_data;
	struct machine_data *mdata =
		container_of(rtd->card, struct machine_data, card);
	struct device *dev = rtd->card->dev;
	int ret = 0;

	/* Tell the codec driver what the serial protocol is. */
	ret = snd_soc_dai_set_fmt(rtd->codec_dai, mdata->dai_format);
	if (ret < 0) {
		dev_err(dev, "could not set codec driver audio format\n");
		return ret;
	}

	/*
	 * Tell the codec driver what the MCLK frequency is, and whether it's
	 * a slave or master.
	 */
	ret = snd_soc_dai_set_sysclk(rtd->codec_dai, 0, mdata->clk_frequency,
				     mdata->codec_clk_direction);
	if (ret < 0) {
		dev_err(dev, "could not set codec driver clock params\n");
		return ret;
	}

	return 0;
}

/**
 * p1022_ds_machine_remove: Remove the sound device
 *
 * This function is called to remove the sound device for one SSI.  We
 * de-program the DMACR and PMUXCR register.
 */
static int p1022_ds_machine_remove(struct snd_soc_card *card)
{
	struct machine_data *mdata =
		container_of(card, struct machine_data, card);
	struct ccsr_guts __iomem *guts;

	guts = ioremap(guts_phys, sizeof(struct ccsr_guts));
	if (!guts) {
		dev_err(card->dev, "could not map global utilities\n");
		return -ENOMEM;
	}

	/* Restore the signal routing */
	clrbits32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_UART0_I2C1_MASK);
	clrbits32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK);
	guts_set_dmuxcr(guts, mdata->dma_id[0], mdata->dma_channel_id[0], 0);
	guts_set_dmuxcr(guts, mdata->dma_id[1], mdata->dma_channel_id[1], 0);

	iounmap(guts);

	return 0;
}

/**
 * p1022_ds_ops: ASoC machine driver operations
 */
static struct snd_soc_ops p1022_ds_ops = {
	.startup = p1022_ds_startup,
};

/**
 * p1022_ds_probe: platform probe function for the machine driver
 *
 * Although this is a machine driver, the SSI node is the "master" node with
 * respect to audio hardware connections.  Therefore, we create a new ASoC
 * device for each new SSI node that has a codec attached.
 */
static int p1022_ds_probe(struct platform_device *pdev)
{
	struct device *dev = pdev->dev.parent;
	/* ssi_pdev is the platform device for the SSI node that probed us */
	struct platform_device *ssi_pdev =
		container_of(dev, struct platform_device, dev);
	struct device_node *np = ssi_pdev->dev.of_node;
	struct device_node *codec_np = NULL;
	struct machine_data *mdata;
	int ret = -ENODEV;
	const char *sprop;
	const u32 *iprop;

	/* Find the codec node for this SSI. */
	codec_np = of_parse_phandle(np, "codec-handle", 0);
	if (!codec_np) {
		dev_err(dev, "could not find codec node\n");
		return -EINVAL;
	}

	mdata = kzalloc(sizeof(struct machine_data), GFP_KERNEL);
	if (!mdata) {
		ret = -ENOMEM;
		goto error_put;
	}

	mdata->dai[0].cpu_dai_name = dev_name(&ssi_pdev->dev);
	mdata->dai[0].ops = &p1022_ds_ops;

	/* ASoC core can match codec with device node */
	mdata->dai[0].codec_of_node = codec_np;

	/* We register two DAIs per SSI, one for playback and the other for
	 * capture.  We support codecs that have separate DAIs for both playback
	 * and capture.
	 */
	memcpy(&mdata->dai[1], &mdata->dai[0], sizeof(struct snd_soc_dai_link));

	/* The DAI names from the codec (snd_soc_dai_driver.name) */
	mdata->dai[0].codec_dai_name = "wm8776-hifi-playback";
	mdata->dai[1].codec_dai_name = "wm8776-hifi-capture";

	/* Get the device ID */
	iprop = of_get_property(np, "cell-index", NULL);
	if (!iprop) {
		dev_err(&pdev->dev, "cell-index property not found\n");
		ret = -EINVAL;
		goto error;
	}
	mdata->ssi_id = be32_to_cpup(iprop);

	/* Get the serial format and clock direction. */
	sprop = of_get_property(np, "fsl,mode", NULL);
	if (!sprop) {
		dev_err(&pdev->dev, "fsl,mode property not found\n");
		ret = -EINVAL;
		goto error;
	}

	if (strcasecmp(sprop, "i2s-slave") == 0) {
		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |
			SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM;
		mdata->codec_clk_direction = SND_SOC_CLOCK_OUT;
		mdata->cpu_clk_direction = SND_SOC_CLOCK_IN;

		/* In i2s-slave mode, the codec has its own clock source, so we
		 * need to get the frequency from the device tree and pass it to
		 * the codec driver.
		 */
		iprop = of_get_property(codec_np, "clock-frequency", NULL);
		if (!iprop || !*iprop) {
			dev_err(&pdev->dev, "codec bus-frequency "
				"property is missing or invalid\n");
			ret = -EINVAL;
			goto error;
		}
		mdata->clk_frequency = be32_to_cpup(iprop);
	} else if (strcasecmp(sprop, "i2s-master") == 0) {
		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |
			SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS;
		mdata->codec_clk_direction = SND_SOC_CLOCK_IN;
		mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT;
	} else if (strcasecmp(sprop, "lj-slave") == 0) {
		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |
			SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM;
		mdata->codec_clk_direction = SND_SOC_CLOCK_OUT;
		mdata->cpu_clk_direction = SND_SOC_CLOCK_IN;
	} else if (strcasecmp(sprop, "lj-master") == 0) {
		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |
			SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBS_CFS;
		mdata->codec_clk_direction = SND_SOC_CLOCK_IN;
		mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT;
	} else if (strcasecmp(sprop, "rj-slave") == 0) {
		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |
			SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBM_CFM;
		mdata->codec_clk_direction = SND_SOC_CLOCK_OUT;
		mdata->cpu_clk_direction = SND_SOC_CLOCK_IN;
	} else if (strcasecmp(sprop, "rj-master") == 0) {
		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |
			SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBS_CFS;
		mdata->codec_clk_direction = SND_SOC_CLOCK_IN;
		mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT;
	} else if (strcasecmp(sprop, "ac97-slave") == 0) {
		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |
			SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBM_CFM;
		mdata->codec_clk_direction = SND_SOC_CLOCK_OUT;
		mdata->cpu_clk_direction = SND_SOC_CLOCK_IN;
	} else if (strcasecmp(sprop, "ac97-master") == 0) {
		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |
			SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBS_CFS;
		mdata->codec_clk_direction = SND_SOC_CLOCK_IN;
		mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT;
	} else {
		dev_err(&pdev->dev,
			"unrecognized fsl,mode property '%s'\n", sprop);
		ret = -EINVAL;
		goto error;
	}

	if (!mdata->clk_frequency) {
		dev_err(&pdev->dev, "unknown clock frequency\n");
		ret = -EINVAL;
		goto error;
	}

	/* Find the playback DMA channel to use. */
	mdata->dai[0].platform_name = mdata->platform_name[0];
	ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0],
				       &mdata->dma_channel_id[0],
				       &mdata->dma_id[0]);
	if (ret) {
		dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n");
		goto error;
	}

	/* Find the capture DMA channel to use. */
	mdata->dai[1].platform_name = mdata->platform_name[1];
	ret = fsl_asoc_get_dma_channel(np, "fsl,capture-dma", &mdata->dai[1],
				       &mdata->dma_channel_id[1],
				       &mdata->dma_id[1]);
	if (ret) {
		dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n");
		goto error;
	}

	/* Initialize our DAI data structure.  */
	mdata->dai[0].stream_name = "playback";
	mdata->dai[1].stream_name = "capture";
	mdata->dai[0].name = mdata->dai[0].stream_name;
	mdata->dai[1].name = mdata->dai[1].stream_name;

	mdata->card.probe = p1022_ds_machine_probe;
	mdata->card.remove = p1022_ds_machine_remove;
	mdata->card.name = pdev->name; /* The platform driver name */
	mdata->card.owner = THIS_MODULE;
	mdata->card.dev = &pdev->dev;
	mdata->card.num_links = 2;
	mdata->card.dai_link = mdata->dai;

	/* Register with ASoC */
	ret = snd_soc_register_card(&mdata->card);
	if (ret) {
		dev_err(&pdev->dev, "could not register card\n");
		goto error;
	}

	of_node_put(codec_np);

	return 0;

error:
	kfree(mdata);
error_put:
	of_node_put(codec_np);
	return ret;
}

/**
 * p1022_ds_remove: remove the platform device
 *
 * This function is called when the platform device is removed.
 */
static int p1022_ds_remove(struct platform_device *pdev)
{
	struct snd_soc_card *card = platform_get_drvdata(pdev);
	struct machine_data *mdata =
		container_of(card, struct machine_data, card);

	snd_soc_unregister_card(card);
	kfree(mdata);

	return 0;
}

static struct platform_driver p1022_ds_driver = {
	.probe = p1022_ds_probe,
	.remove = p1022_ds_remove,
	.driver = {
		/*
		 * The name must match 'compatible' property in the device tree,
		 * in lowercase letters.
		 */
		.name = "snd-soc-p1022ds",
		.owner = THIS_MODULE,
	},
};

/**
 * p1022_ds_init: machine driver initialization.
 *
 * This function is called when this module is loaded.
 */
static int __init p1022_ds_init(void)
{
	struct device_node *guts_np;
	struct resource res;

	/* Get the physical address of the global utilities registers */
	guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
	if (of_address_to_resource(guts_np, 0, &res)) {
		pr_err("snd-soc-p1022ds: missing/invalid global utils node\n");
		of_node_put(guts_np);
		return -EINVAL;
	}
	guts_phys = res.start;
	of_node_put(guts_np);

	return platform_driver_register(&p1022_ds_driver);
}

/**
 * p1022_ds_exit: machine driver exit
 *
 * This function is called when this driver is unloaded.
 */
static void __exit p1022_ds_exit(void)
{
	platform_driver_unregister(&p1022_ds_driver);
}

module_init(p1022_ds_init);
module_exit(p1022_ds_exit);

MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
MODULE_DESCRIPTION("Freescale P1022 DS ALSA SoC machine driver");
MODULE_LICENSE("GPL v2");