Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 | /*
* An SPI driver for the Philips PCF2123 RTC
* Copyright 2009 Cyber Switching, Inc.
*
* Author: Chris Verges <chrisv@cyberswitching.com>
* Maintainers: http://www.cyberswitching.com
*
* based on the RS5C348 driver in this same directory.
*
* Thanks to Christian Pellegrin <chripell@fsfe.org> for
* the sysfs contributions to this driver.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Please note that the CS is active high, so platform data
* should look something like:
*
* static struct spi_board_info ek_spi_devices[] = {
* ...
* {
* .modalias = "rtc-pcf2123",
* .chip_select = 1,
* .controller_data = (void *)AT91_PIN_PA10,
* .max_speed_hz = 1000 * 1000,
* .mode = SPI_CS_HIGH,
* .bus_num = 0,
* },
* ...
*};
*
*/
#include <linux/bcd.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/rtc.h>
#include <linux/spi/spi.h>
#include <linux/module.h>
#include <linux/sysfs.h>
#define DRV_VERSION "0.6"
#define PCF2123_REG_CTRL1 (0x00) /* Control Register 1 */
#define PCF2123_REG_CTRL2 (0x01) /* Control Register 2 */
#define PCF2123_REG_SC (0x02) /* datetime */
#define PCF2123_REG_MN (0x03)
#define PCF2123_REG_HR (0x04)
#define PCF2123_REG_DM (0x05)
#define PCF2123_REG_DW (0x06)
#define PCF2123_REG_MO (0x07)
#define PCF2123_REG_YR (0x08)
#define PCF2123_SUBADDR (1 << 4)
#define PCF2123_WRITE ((0 << 7) | PCF2123_SUBADDR)
#define PCF2123_READ ((1 << 7) | PCF2123_SUBADDR)
static struct spi_driver pcf2123_driver;
struct pcf2123_sysfs_reg {
struct device_attribute attr;
char name[2];
};
struct pcf2123_plat_data {
struct rtc_device *rtc;
struct pcf2123_sysfs_reg regs[16];
};
/*
* Causes a 30 nanosecond delay to ensure that the PCF2123 chip select
* is released properly after an SPI write. This function should be
* called after EVERY read/write call over SPI.
*/
static inline void pcf2123_delay_trec(void)
{
ndelay(30);
}
static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
char *buffer)
{
struct spi_device *spi = to_spi_device(dev);
struct pcf2123_sysfs_reg *r;
u8 txbuf[1], rxbuf[1];
unsigned long reg;
int ret;
r = container_of(attr, struct pcf2123_sysfs_reg, attr);
ret = kstrtoul(r->name, 16, ®);
if (ret)
return ret;
txbuf[0] = PCF2123_READ | reg;
ret = spi_write_then_read(spi, txbuf, 1, rxbuf, 1);
if (ret < 0)
return -EIO;
pcf2123_delay_trec();
return sprintf(buffer, "0x%x\n", rxbuf[0]);
}
static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr,
const char *buffer, size_t count) {
struct spi_device *spi = to_spi_device(dev);
struct pcf2123_sysfs_reg *r;
u8 txbuf[2];
unsigned long reg;
unsigned long val;
int ret;
r = container_of(attr, struct pcf2123_sysfs_reg, attr);
ret = kstrtoul(r->name, 16, ®);
if (ret)
return ret;
ret = kstrtoul(buffer, 10, &val);
if (ret)
return ret;
txbuf[0] = PCF2123_WRITE | reg;
txbuf[1] = val;
ret = spi_write(spi, txbuf, sizeof(txbuf));
if (ret < 0)
return -EIO;
pcf2123_delay_trec();
return count;
}
static int pcf2123_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct spi_device *spi = to_spi_device(dev);
u8 txbuf[1], rxbuf[7];
int ret;
txbuf[0] = PCF2123_READ | PCF2123_REG_SC;
ret = spi_write_then_read(spi, txbuf, sizeof(txbuf),
rxbuf, sizeof(rxbuf));
if (ret < 0)
return ret;
pcf2123_delay_trec();
tm->tm_sec = bcd2bin(rxbuf[0] & 0x7F);
tm->tm_min = bcd2bin(rxbuf[1] & 0x7F);
tm->tm_hour = bcd2bin(rxbuf[2] & 0x3F); /* rtc hr 0-23 */
tm->tm_mday = bcd2bin(rxbuf[3] & 0x3F);
tm->tm_wday = rxbuf[4] & 0x07;
tm->tm_mon = bcd2bin(rxbuf[5] & 0x1F) - 1; /* rtc mn 1-12 */
tm->tm_year = bcd2bin(rxbuf[6]);
if (tm->tm_year < 70)
tm->tm_year += 100; /* assume we are in 1970...2069 */
dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__func__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
/* the clock can give out invalid datetime, but we cannot return
* -EINVAL otherwise hwclock will refuse to set the time on bootup.
*/
if (rtc_valid_tm(tm) < 0)
dev_err(dev, "retrieved date/time is not valid.\n");
return 0;
}
static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct spi_device *spi = to_spi_device(dev);
u8 txbuf[8];
int ret;
dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__func__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
/* Stop the counter first */
txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
txbuf[1] = 0x20;
ret = spi_write(spi, txbuf, 2);
if (ret < 0)
return ret;
pcf2123_delay_trec();
/* Set the new time */
txbuf[0] = PCF2123_WRITE | PCF2123_REG_SC;
txbuf[1] = bin2bcd(tm->tm_sec & 0x7F);
txbuf[2] = bin2bcd(tm->tm_min & 0x7F);
txbuf[3] = bin2bcd(tm->tm_hour & 0x3F);
txbuf[4] = bin2bcd(tm->tm_mday & 0x3F);
txbuf[5] = tm->tm_wday & 0x07;
txbuf[6] = bin2bcd((tm->tm_mon + 1) & 0x1F); /* rtc mn 1-12 */
txbuf[7] = bin2bcd(tm->tm_year < 100 ? tm->tm_year : tm->tm_year - 100);
ret = spi_write(spi, txbuf, sizeof(txbuf));
if (ret < 0)
return ret;
pcf2123_delay_trec();
/* Start the counter */
txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
txbuf[1] = 0x00;
ret = spi_write(spi, txbuf, 2);
if (ret < 0)
return ret;
pcf2123_delay_trec();
return 0;
}
static const struct rtc_class_ops pcf2123_rtc_ops = {
.read_time = pcf2123_rtc_read_time,
.set_time = pcf2123_rtc_set_time,
};
static int pcf2123_probe(struct spi_device *spi)
{
struct rtc_device *rtc;
struct pcf2123_plat_data *pdata;
u8 txbuf[2], rxbuf[2];
int ret, i;
pdata = devm_kzalloc(&spi->dev, sizeof(struct pcf2123_plat_data),
GFP_KERNEL);
if (!pdata)
return -ENOMEM;
spi->dev.platform_data = pdata;
/* Send a software reset command */
txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
txbuf[1] = 0x58;
dev_dbg(&spi->dev, "resetting RTC (0x%02X 0x%02X)\n",
txbuf[0], txbuf[1]);
ret = spi_write(spi, txbuf, 2 * sizeof(u8));
if (ret < 0)
goto kfree_exit;
pcf2123_delay_trec();
/* Stop the counter */
txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
txbuf[1] = 0x20;
dev_dbg(&spi->dev, "stopping RTC (0x%02X 0x%02X)\n",
txbuf[0], txbuf[1]);
ret = spi_write(spi, txbuf, 2 * sizeof(u8));
if (ret < 0)
goto kfree_exit;
pcf2123_delay_trec();
/* See if the counter was actually stopped */
txbuf[0] = PCF2123_READ | PCF2123_REG_CTRL1;
dev_dbg(&spi->dev, "checking for presence of RTC (0x%02X)\n",
txbuf[0]);
ret = spi_write_then_read(spi, txbuf, 1 * sizeof(u8),
rxbuf, 2 * sizeof(u8));
dev_dbg(&spi->dev, "received data from RTC (0x%02X 0x%02X)\n",
rxbuf[0], rxbuf[1]);
if (ret < 0)
goto kfree_exit;
pcf2123_delay_trec();
if (!(rxbuf[0] & 0x20)) {
dev_err(&spi->dev, "chip not found\n");
ret = -ENODEV;
goto kfree_exit;
}
dev_info(&spi->dev, "chip found, driver version " DRV_VERSION "\n");
dev_info(&spi->dev, "spiclk %u KHz.\n",
(spi->max_speed_hz + 500) / 1000);
/* Start the counter */
txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
txbuf[1] = 0x00;
ret = spi_write(spi, txbuf, sizeof(txbuf));
if (ret < 0)
goto kfree_exit;
pcf2123_delay_trec();
/* Finalize the initialization */
rtc = devm_rtc_device_register(&spi->dev, pcf2123_driver.driver.name,
&pcf2123_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
dev_err(&spi->dev, "failed to register.\n");
ret = PTR_ERR(rtc);
goto kfree_exit;
}
pdata->rtc = rtc;
for (i = 0; i < 16; i++) {
sysfs_attr_init(&pdata->regs[i].attr.attr);
sprintf(pdata->regs[i].name, "%1x", i);
pdata->regs[i].attr.attr.mode = S_IRUGO | S_IWUSR;
pdata->regs[i].attr.attr.name = pdata->regs[i].name;
pdata->regs[i].attr.show = pcf2123_show;
pdata->regs[i].attr.store = pcf2123_store;
ret = device_create_file(&spi->dev, &pdata->regs[i].attr);
if (ret) {
dev_err(&spi->dev, "Unable to create sysfs %s\n",
pdata->regs[i].name);
goto sysfs_exit;
}
}
return 0;
sysfs_exit:
for (i--; i >= 0; i--)
device_remove_file(&spi->dev, &pdata->regs[i].attr);
kfree_exit:
spi->dev.platform_data = NULL;
return ret;
}
static int pcf2123_remove(struct spi_device *spi)
{
struct pcf2123_plat_data *pdata = spi->dev.platform_data;
int i;
if (pdata) {
for (i = 0; i < 16; i++)
if (pdata->regs[i].name[0])
device_remove_file(&spi->dev,
&pdata->regs[i].attr);
}
return 0;
}
static struct spi_driver pcf2123_driver = {
.driver = {
.name = "rtc-pcf2123",
.owner = THIS_MODULE,
},
.probe = pcf2123_probe,
.remove = pcf2123_remove,
};
module_spi_driver(pcf2123_driver);
MODULE_AUTHOR("Chris Verges <chrisv@cyberswitching.com>");
MODULE_DESCRIPTION("NXP PCF2123 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
|