Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 | /***************************************************************************/
/*
* linux/arch/m68knommu/platform/5249/config.c
*
* Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
*/
/***************************************************************************/
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/
static struct mcf_platform_uart m5249_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 73,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = 74,
},
{ },
};
static struct platform_device m5249_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5249_uart_platform,
};
#ifdef CONFIG_M5249C3
static struct resource m5249_smc91x_resources[] = {
{
.start = 0xe0000300,
.end = 0xe0000300 + 0x100,
.flags = IORESOURCE_MEM,
},
{
.start = MCFINTC2_GPIOIRQ6,
.end = MCFINTC2_GPIOIRQ6,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m5249_smc91x = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(m5249_smc91x_resources),
.resource = m5249_smc91x_resources,
};
#endif /* CONFIG_M5249C3 */
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m5249_qspi_resources[] = {
{
.start = MCFQSPI_IOBASE,
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_QSPI,
.end = MCF_IRQ_QSPI,
.flags = IORESOURCE_IRQ,
},
};
#define MCFQSPI_CS0 29
#define MCFQSPI_CS1 24
#define MCFQSPI_CS2 21
#define MCFQSPI_CS3 22
static int m5249_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
goto fail4;
}
return 0;
fail4:
gpio_free(MCFQSPI_CS3);
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m5249_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS3);
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m5249_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, cs_high);
break;
}
}
static void m5249_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, !cs_high);
break;
}
}
static struct mcfqspi_cs_control m5249_cs_control = {
.setup = m5249_cs_setup,
.teardown = m5249_cs_teardown,
.select = m5249_cs_select,
.deselect = m5249_cs_deselect,
};
static struct mcfqspi_platform_data m5249_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &m5249_cs_control,
};
static struct platform_device m5249_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m5249_qspi_resources),
.resource = m5249_qspi_resources,
.dev.platform_data = &m5249_qspi_data,
};
static void __init m5249_qspi_init(void)
{
/* QSPI irq setup */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
MCF_MBAR + MCFSIM_QSPIICR);
mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
}
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m5249_devices[] __initdata = {
&m5249_uart,
#ifdef CONFIG_M5249C3
&m5249_smc91x,
#endif
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m5249_qspi,
#endif
};
/***************************************************************************/
static void __init m5249_uart_init_line(int line, int irq)
{
if (line == 0) {
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART0);
} else if (line == 1) {
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART1);
}
}
static void __init m5249_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m5249_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m5249_uart_init_line(line, m5249_uart_platform[line].irq);
}
/***************************************************************************/
#ifdef CONFIG_M5249C3
static void __init m5249_smc91x_init(void)
{
u32 gpio;
/* Set the GPIO line as interrupt source for smc91x device */
gpio = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
writel(gpio | 0x40, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
gpio = readl(MCF_MBAR2 + MCFSIM2_INTLEVEL5);
writel(gpio | 0x04000000, MCF_MBAR2 + MCFSIM2_INTLEVEL5);
}
#endif /* CONFIG_M5249C3 */
/***************************************************************************/
static void __init m5249_timers_init(void)
{
/* Timer1 is always used as system timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER1ICR);
mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
#ifdef CONFIG_HIGHPROFILE
/* Timer2 is to be used as a high speed profile timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER2ICR);
mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
#endif
}
/***************************************************************************/
void m5249_cpu_reset(void)
{
local_irq_disable();
/* Set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mach_reset = m5249_cpu_reset;
m5249_timers_init();
m5249_uarts_init();
#ifdef CONFIG_M5249C3
m5249_smc91x_init();
#endif
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
m5249_qspi_init();
#endif
}
/***************************************************************************/
static int __init init_BSP(void)
{
platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
|