Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 | /* Copyright (C) 2003-2005 SBE, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <asm/io.h>
#include <linux/hdlc.h>
#include "pmcc4_sysdep.h"
#include "sbecom_inline_linux.h"
#include "libsbew.h"
#include "pmcc4.h"
#include "comet.h"
#include "comet_tables.h"
#ifdef SBE_INCLUDE_SYMBOLS
#define STATIC
#else
#define STATIC static
#endif
extern int cxt1e1_log_level;
#define COMET_NUM_SAMPLES 24 /* Number of entries in the waveform table */
#define COMET_NUM_UNITS 5 /* Number of points per entry in table */
/* forward references */
STATIC void SetPwrLevel (comet_t * comet);
STATIC void WrtRcvEqualizerTbl (ci_t * ci, comet_t * comet, u_int32_t *table);
STATIC void WrtXmtWaveformTbl (ci_t * ci, comet_t * comet, u_int8_t table[COMET_NUM_SAMPLES][COMET_NUM_UNITS]);
void *TWV_table[12] = {
TWVLongHaul0DB, TWVLongHaul7_5DB, TWVLongHaul15DB, TWVLongHaul22_5DB,
TWVShortHaul0, TWVShortHaul1, TWVShortHaul2, TWVShortHaul3, TWVShortHaul4,
TWVShortHaul5,
TWV_E1_75Ohm, /** PORT POINT - 75 Ohm not supported **/
TWV_E1_120Ohm
};
static int
lbo_tbl_lkup (int t1, int lbo)
{
if ((lbo < CFG_LBO_LH0) || (lbo > CFG_LBO_E120)) /* error switches to
* default */
{
if (t1)
lbo = CFG_LBO_LH0; /* default T1 waveform table */
else
lbo = CFG_LBO_E120; /* default E1 waveform table */
}
return (lbo - 1); /* make index ZERO relative */
}
void
init_comet (void *ci, comet_t * comet, u_int32_t port_mode, int clockmaster,
u_int8_t moreParams)
{
u_int8_t isT1mode;
u_int8_t tix = CFG_LBO_LH0; /* T1 default */
isT1mode = IS_FRAME_ANY_T1 (port_mode);
/* T1 or E1 */
if (isT1mode)
{
pci_write_32 ((u_int32_t *) &comet->gbl_cfg, 0xa0); /* Select T1 Mode & PIO
* output enabled */
tix = lbo_tbl_lkup (isT1mode, CFG_LBO_LH0); /* default T1 waveform
* table */
} else
{
pci_write_32 ((u_int32_t *) &comet->gbl_cfg, 0x81); /* Select E1 Mode & PIO
* output enabled */
tix = lbo_tbl_lkup (isT1mode, CFG_LBO_E120); /* default E1 waveform
* table */
}
if (moreParams & CFG_LBO_MASK)
tix = lbo_tbl_lkup (isT1mode, moreParams & CFG_LBO_MASK); /* dial-in requested
* waveform table */
/* Tx line Intfc cfg ** Set for analog & no special patterns */
pci_write_32 ((u_int32_t *) &comet->tx_line_cfg, 0x00); /* Transmit Line
* Interface Config. */
/* master test ** Ignore Test settings for now */
pci_write_32 ((u_int32_t *) &comet->mtest, 0x00); /* making sure it's
* Default value */
/* Turn on Center (CENT) and everything else off */
pci_write_32 ((u_int32_t *) &comet->rjat_cfg, 0x10); /* RJAT cfg */
/* Set Jitter Attenuation to recommend T1 values */
if (isT1mode)
{
pci_write_32 ((u_int32_t *) &comet->rjat_n1clk, 0x2F); /* RJAT Divider N1
* Control */
pci_write_32 ((u_int32_t *) &comet->rjat_n2clk, 0x2F); /* RJAT Divider N2
* Control */
} else
{
pci_write_32 ((u_int32_t *) &comet->rjat_n1clk, 0xFF); /* RJAT Divider N1
* Control */
pci_write_32 ((u_int32_t *) &comet->rjat_n2clk, 0xFF); /* RJAT Divider N2
* Control */
}
/* Turn on Center (CENT) and everything else off */
pci_write_32 ((u_int32_t *) &comet->tjat_cfg, 0x10); /* TJAT Config. */
/* Do not bypass jitter attenuation and bypass elastic store */
pci_write_32 ((u_int32_t *) &comet->rx_opt, 0x00); /* rx opts */
/* TJAT ctrl & TJAT divider ctrl */
/* Set Jitter Attenuation to recommended T1 values */
if (isT1mode)
{
pci_write_32 ((u_int32_t *) &comet->tjat_n1clk, 0x2F); /* TJAT Divider N1
* Control */
pci_write_32 ((u_int32_t *) &comet->tjat_n2clk, 0x2F); /* TJAT Divider N2
* Control */
} else
{
pci_write_32 ((u_int32_t *) &comet->tjat_n1clk, 0xFF); /* TJAT Divider N1
* Control */
pci_write_32 ((u_int32_t *) &comet->tjat_n2clk, 0xFF); /* TJAT Divider N2
* Control */
}
/* 1c: rx ELST cfg 20: tx ELST cfg 28&38: rx&tx data link ctrl */
if (isT1mode)
{ /* Select 193-bit frame format */
pci_write_32 ((u_int32_t *) &comet->rx_elst_cfg, 0x00);
pci_write_32 ((u_int32_t *) &comet->tx_elst_cfg, 0x00);
} else
{ /* Select 256-bit frame format */
pci_write_32 ((u_int32_t *) &comet->rx_elst_cfg, 0x03);
pci_write_32 ((u_int32_t *) &comet->tx_elst_cfg, 0x03);
pci_write_32 ((u_int32_t *) &comet->rxce1_ctl, 0x00); /* disable T1 data link
* receive */
pci_write_32 ((u_int32_t *) &comet->txci1_ctl, 0x00); /* disable T1 data link
* transmit */
}
/* the following is a default value */
/* Enable 8 out of 10 validation */
pci_write_32 ((u_int32_t *) &comet->t1_rboc_ena, 0x00); /* t1RBOC
* enable(BOC:BitOriented
* Code) */
if (isT1mode)
{
/* IBCD cfg: aka Inband Code Detection ** loopback code length set to */
pci_write_32 ((u_int32_t *) &comet->ibcd_cfg, 0x04); /* 6 bit down, 5 bit up
* (assert) */
pci_write_32 ((u_int32_t *) &comet->ibcd_act, 0x08); /* line loopback
* activate pattern */
pci_write_32 ((u_int32_t *) &comet->ibcd_deact, 0x24); /* deactivate code
* pattern (i.e.001) */
}
/* 10: CDRC cfg 28&38: rx&tx data link 1 ctrl 48: t1 frmr cfg */
/* 50: SIGX cfg, COSS (change of signaling state) 54: XBAS cfg */
/* 60: t1 ALMI cfg */
/* Configure Line Coding */
switch (port_mode)
{
case CFG_FRAME_SF: /* 1 - T1 B8ZS */
pci_write_32 ((u_int32_t *) &comet->cdrc_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->t1_frmr_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->sigx_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->t1_xbas_cfg, 0x20); /* 5:B8ZS */
pci_write_32 ((u_int32_t *) &comet->t1_almi_cfg, 0);
break;
case CFG_FRAME_ESF: /* 2 - T1 B8ZS */
pci_write_32 ((u_int32_t *) &comet->cdrc_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->rxce1_ctl, 0x20); /* Bit 5: T1 DataLink
* Enable */
pci_write_32 ((u_int32_t *) &comet->txci1_ctl, 0x20); /* 5: T1 DataLink Enable */
pci_write_32 ((u_int32_t *) &comet->t1_frmr_cfg, 0x30); /* 4:ESF 5:ESFFA */
pci_write_32 ((u_int32_t *) &comet->sigx_cfg, 0x04); /* 2:ESF */
pci_write_32 ((u_int32_t *) &comet->t1_xbas_cfg, 0x30); /* 4:ESF 5:B8ZS */
pci_write_32 ((u_int32_t *) &comet->t1_almi_cfg, 0x10); /* 4:ESF */
break;
case CFG_FRAME_E1PLAIN: /* 3 - HDB3 */
pci_write_32 ((u_int32_t *) &comet->cdrc_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->sigx_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->e1_tran_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->e1_frmr_aopts, 0x40);
break;
case CFG_FRAME_E1CAS: /* 4 - HDB3 */
pci_write_32 ((u_int32_t *) &comet->cdrc_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->sigx_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->e1_tran_cfg, 0x60);
pci_write_32 ((u_int32_t *) &comet->e1_frmr_aopts, 0);
break;
case CFG_FRAME_E1CRC: /* 5 - HDB3 */
pci_write_32 ((u_int32_t *) &comet->cdrc_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->sigx_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->e1_tran_cfg, 0x10);
pci_write_32 ((u_int32_t *) &comet->e1_frmr_aopts, 0xc2);
break;
case CFG_FRAME_E1CRC_CAS: /* 6 - HDB3 */
pci_write_32 ((u_int32_t *) &comet->cdrc_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->sigx_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->e1_tran_cfg, 0x70);
pci_write_32 ((u_int32_t *) &comet->e1_frmr_aopts, 0x82);
break;
case CFG_FRAME_SF_AMI: /* 7 - T1 AMI */
pci_write_32 ((u_int32_t *) &comet->cdrc_cfg, 0x80); /* Enable AMI Line
* Decoding */
pci_write_32 ((u_int32_t *) &comet->t1_frmr_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->t1_xbas_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->t1_almi_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->sigx_cfg, 0);
break;
case CFG_FRAME_ESF_AMI: /* 8 - T1 AMI */
pci_write_32 ((u_int32_t *) &comet->cdrc_cfg, 0x80); /* Enable AMI Line
* Decoding */
pci_write_32 ((u_int32_t *) &comet->rxce1_ctl, 0x20); /* 5: T1 DataLink Enable */
pci_write_32 ((u_int32_t *) &comet->txci1_ctl, 0x20); /* 5: T1 DataLink Enable */
pci_write_32 ((u_int32_t *) &comet->t1_frmr_cfg, 0x30); /* Bit 4:ESF 5:ESFFA */
pci_write_32 ((u_int32_t *) &comet->sigx_cfg, 0x04); /* 2:ESF */
pci_write_32 ((u_int32_t *) &comet->t1_xbas_cfg, 0x10); /* 4:ESF */
pci_write_32 ((u_int32_t *) &comet->t1_almi_cfg, 0x10); /* 4:ESF */
break;
case CFG_FRAME_E1PLAIN_AMI: /* 9 - AMI */
pci_write_32 ((u_int32_t *) &comet->cdrc_cfg, 0x80); /* Enable AMI Line
* Decoding */
pci_write_32 ((u_int32_t *) &comet->sigx_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->e1_tran_cfg, 0x80);
pci_write_32 ((u_int32_t *) &comet->e1_frmr_aopts, 0x40);
break;
case CFG_FRAME_E1CAS_AMI: /* 10 - AMI */
pci_write_32 ((u_int32_t *) &comet->cdrc_cfg, 0x80); /* Enable AMI Line
* Decoding */
pci_write_32 ((u_int32_t *) &comet->sigx_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->e1_tran_cfg, 0xe0);
pci_write_32 ((u_int32_t *) &comet->e1_frmr_aopts, 0);
break;
case CFG_FRAME_E1CRC_AMI: /* 11 - AMI */
pci_write_32 ((u_int32_t *) &comet->cdrc_cfg, 0x80); /* Enable AMI Line
* Decoding */
pci_write_32 ((u_int32_t *) &comet->sigx_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->e1_tran_cfg, 0x90);
pci_write_32 ((u_int32_t *) &comet->e1_frmr_aopts, 0xc2);
break;
case CFG_FRAME_E1CRC_CAS_AMI: /* 12 - AMI */
pci_write_32 ((u_int32_t *) &comet->cdrc_cfg, 0x80); /* Enable AMI Line
* Decoding */
pci_write_32 ((u_int32_t *) &comet->sigx_cfg, 0);
pci_write_32 ((u_int32_t *) &comet->e1_tran_cfg, 0xf0);
pci_write_32 ((u_int32_t *) &comet->e1_frmr_aopts, 0x82);
break;
} /* end switch */
/***
* Set Full Frame mode (NXDSO[1] = 0, NXDSO[0] = 0)
* CMODE=1: Clock slave mode with BRCLK as an input,
* DE=0: Use falling edge of BRCLK for data,
* FE=0: Use falling edge of BRCLK for frame,
* CMS=0: Use backplane freq,
* RATE[1:0]=0,0: T1
***/
/* 0x30: "BRIF cfg"; 0x20 is 'CMODE', 0x03 is (bit) rate */
/* note "rate bits can only be set once after reset" */
if (clockmaster)
{ /* CMODE == clockMode, 0=clock master (so
* all 3 others should be slave) */
if (isT1mode) /* rate = 1.544 Mb/s */
pci_write_32 ((u_int32_t *) &comet->brif_cfg, 0x00); /* Comet 0 Master
* Mode(CMODE=0) */
else /* rate = 2.048 Mb/s */
pci_write_32 ((u_int32_t *) &comet->brif_cfg, 0x01); /* Comet 0 Master
* Mode(CMODE=0) */
/* 31: BRIF frame pulse cfg 06: tx timing options */
pci_write_32 ((u_int32_t *) &comet->brif_fpcfg, 0x00); /* Master Mode
* i.e.FPMODE=0 (@0x20) */
if ((moreParams & CFG_CLK_PORT_MASK) == CFG_CLK_PORT_INTERNAL)
{
if (cxt1e1_log_level >= LOG_SBEBUG12)
pr_info(">> %s: clockmaster internal clock\n", __func__);
pci_write_32 ((u_int32_t *) &comet->tx_time, 0x0d); /* internal oscillator */
} else /* external clock source */
{
if (cxt1e1_log_level >= LOG_SBEBUG12)
pr_info(">> %s: clockmaster external clock\n", __func__);
pci_write_32 ((u_int32_t *) &comet->tx_time, 0x09); /* loop timing
* (external) */
}
} else /* slave */
{
if (isT1mode)
pci_write_32 ((u_int32_t *) &comet->brif_cfg, 0x20); /* Slave Mode(CMODE=1,
* see above) */
else
pci_write_32 ((u_int32_t *) &comet->brif_cfg, 0x21); /* Slave Mode (CMODE=1) */
pci_write_32 ((u_int32_t *) &comet->brif_fpcfg, 0x20); /* Slave Mode i.e.
* FPMODE=1 (@0x20) */
if (cxt1e1_log_level >= LOG_SBEBUG12)
pr_info(">> %s: clockslave internal clock\n", __func__);
pci_write_32 ((u_int32_t *) &comet->tx_time, 0x0d); /* oscillator timing */
}
/* 32: BRIF parity F-bit cfg */
/* Totem-pole operation */
pci_write_32 ((u_int32_t *) &comet->brif_pfcfg, 0x01); /* Receive Backplane
* Parity/F-bit */
/* dc: RLPS equalizer V ref */
/* Configuration */
if (isT1mode)
pci_write_32 ((u_int32_t *) &comet->rlps_eqvr, 0x2c); /* RLPS Equalizer
* Voltage */
else
pci_write_32 ((u_int32_t *) &comet->rlps_eqvr, 0x34); /* RLPS Equalizer
* Voltage */
/* Reserved bit set and SQUELCH enabled */
/* f8: RLPS cfg & status f9: RLPS ALOS detect/clear threshold */
pci_write_32 ((u_int32_t *) &comet->rlps_cfgsts, 0x11); /* RLPS Configuration
* Status */
if (isT1mode)
pci_write_32 ((u_int32_t *) &comet->rlps_alos_thresh, 0x55); /* ? */
else
pci_write_32 ((u_int32_t *) &comet->rlps_alos_thresh, 0x22); /* ? */
/* Set Full Frame mode (NXDSO[1] = 0, NXDSO[0] = 0) */
/* CMODE=0: Clock slave mode with BTCLK as an input, DE=1: Use rising */
/* edge of BTCLK for data, FE=1: Use rising edge of BTCLK for frame, */
/* CMS=0: Use backplane freq, RATE[1:0]=0,0: T1 */
/*** Transmit side is always an Input, Slave Clock*/
/* 40: BTIF cfg 41: BTIF frame pulse cfg */
if (isT1mode)
pci_write_32 ((u_int32_t *) &comet->btif_cfg, 0x38); /* BTIF Configuration
* Reg. */
else
pci_write_32 ((u_int32_t *) &comet->btif_cfg, 0x39); /* BTIF Configuration
* Reg. */
pci_write_32 ((u_int32_t *) &comet->btif_fpcfg, 0x01); /* BTIF Frame Pulse
* Config. */
/* 0a: master diag 06: tx timing options */
/* if set Comet to loop back */
/* Comets set to normal */
pci_write_32 ((u_int32_t *) &comet->mdiag, 0x00);
/* BTCLK driven by TCLKI internally (crystal driven) and Xmt Elasted */
/* Store is enabled. */
WrtXmtWaveformTbl (ci, comet, TWV_table[tix]);
if (isT1mode)
WrtRcvEqualizerTbl ((ci_t *) ci, comet, &T1_Equalizer[0]);
else
WrtRcvEqualizerTbl ((ci_t *) ci, comet, &E1_Equalizer[0]);
SetPwrLevel (comet);
}
/*
** Name: WrtXmtWaveform
** Description: Formulate the Data for the Pulse Waveform Storage
** Write register, (F2), from the sample and unit inputs.
** Write the data to the Pulse Waveform Storage Data register.
** Returns: Nothing
*/
STATIC void
WrtXmtWaveform (ci_t * ci, comet_t * comet, u_int32_t sample, u_int32_t unit, u_int8_t data)
{
u_int8_t WaveformAddr;
WaveformAddr = (sample << 3) + (unit & 7);
pci_write_32 ((u_int32_t *) &comet->xlpg_pwave_addr, WaveformAddr);
pci_flush_write (ci); /* for write order preservation when
* Optimizing driver */
pci_write_32 ((u_int32_t *) &comet->xlpg_pwave_data, 0x7F & data);
}
/*
** Name: WrtXmtWaveformTbl
** Description: Fill in the Transmit Waveform Values
** for driving the transmitter DAC.
** Returns: Nothing
*/
STATIC void
WrtXmtWaveformTbl (ci_t * ci, comet_t * comet,
u_int8_t table[COMET_NUM_SAMPLES][COMET_NUM_UNITS])
{
u_int32_t sample, unit;
for (sample = 0; sample < COMET_NUM_SAMPLES; sample++)
{
for (unit = 0; unit < COMET_NUM_UNITS; unit++)
WrtXmtWaveform (ci, comet, sample, unit, table[sample][unit]);
}
/* Enable transmitter and set output amplitude */
pci_write_32 ((u_int32_t *) &comet->xlpg_cfg, table[COMET_NUM_SAMPLES][0]);
}
/*
** Name: WrtXmtWaveform
** Description: Fill in the Receive Equalizer RAM from the desired
** table.
** Returns: Nothing
**
** Remarks: Per PM4351 Device Errata, Receive Equalizer RAM Initialization
** is coded with early setup of indirect address.
*/
STATIC void
WrtRcvEqualizerTbl (ci_t * ci, comet_t * comet, u_int32_t *table)
{
u_int32_t ramaddr;
volatile u_int32_t value;
for (ramaddr = 0; ramaddr < 256; ramaddr++)
{
/*** the following lines are per Errata 7, 2.5 ***/
{
pci_write_32 ((u_int32_t *) &comet->rlps_eq_rwsel, 0x80); /* Set up for a read
* operation */
pci_flush_write (ci); /* for write order preservation when
* Optimizing driver */
pci_write_32 ((u_int32_t *) &comet->rlps_eq_iaddr, (u_int8_t) ramaddr); /* write the addr,
* initiate a read */
pci_flush_write (ci); /* for write order preservation when
* Optimizing driver */
/*
* wait 3 line rate clock cycles to ensure address bits are
* captured by T1/E1 clock
*/
OS_uwait (4, "wret"); /* 683ns * 3 = 1366 ns, approx 2us (but
* use 4us) */
}
value = *table++;
pci_write_32 ((u_int32_t *) &comet->rlps_idata3, (u_int8_t) (value >> 24));
pci_write_32 ((u_int32_t *) &comet->rlps_idata2, (u_int8_t) (value >> 16));
pci_write_32 ((u_int32_t *) &comet->rlps_idata1, (u_int8_t) (value >> 8));
pci_write_32 ((u_int32_t *) &comet->rlps_idata0, (u_int8_t) value);
pci_flush_write (ci); /* for write order preservation when
* Optimizing driver */
/* Storing RAM address, causes RAM to be updated */
pci_write_32 ((u_int32_t *) &comet->rlps_eq_rwsel, 0); /* Set up for a write
* operation */
pci_flush_write (ci); /* for write order preservation when
* Optimizing driver */
pci_write_32 ((u_int32_t *) &comet->rlps_eq_iaddr, (u_int8_t) ramaddr); /* write the addr,
* initiate a read */
pci_flush_write (ci); /* for write order preservation when
* Optimizing driver */
/*
* wait 3 line rate clock cycles to ensure address bits are captured
* by T1/E1 clock
*/
OS_uwait (4, "wret"); /* 683ns * 3 = 1366 ns, approx 2us (but
* use 4us) */
}
pci_write_32 ((u_int32_t *) &comet->rlps_eq_cfg, 0xCB); /* Enable Equalizer &
* set it to use 256
* periods */
}
/*
** Name: SetPwrLevel
** Description: Implement power level setting algorithm described below
** Returns: Nothing
*/
STATIC void
SetPwrLevel (comet_t * comet)
{
volatile u_int32_t temp;
/*
** Algorithm to Balance the Power Distribution of Ttip Tring
**
** Zero register F6
** Write 0x01 to register F4
** Write another 0x01 to register F4
** Read register F4
** Remove the 0x01 bit by Anding register F4 with 0xFE
** Write the resultant value to register F4
** Repeat these steps for register F5
** Write 0x01 to register F6
*/
pci_write_32 ((u_int32_t *) &comet->xlpg_fdata_sel, 0x00); /* XLPG Fuse Data Select */
pci_write_32 ((u_int32_t *) &comet->xlpg_atest_pctl, 0x01); /* XLPG Analog Test
* Positive control */
pci_write_32 ((u_int32_t *) &comet->xlpg_atest_pctl, 0x01);
temp = pci_read_32 ((u_int32_t *) &comet->xlpg_atest_pctl) & 0xfe;
pci_write_32 ((u_int32_t *) &comet->xlpg_atest_pctl, temp);
pci_write_32 ((u_int32_t *) &comet->xlpg_atest_nctl, 0x01); /* XLPG Analog Test
* Negative control */
pci_write_32 ((u_int32_t *) &comet->xlpg_atest_nctl, 0x01);
temp = pci_read_32 ((u_int32_t *) &comet->xlpg_atest_nctl) & 0xfe;
pci_write_32 ((u_int32_t *) &comet->xlpg_atest_nctl, temp);
pci_write_32 ((u_int32_t *) &comet->xlpg_fdata_sel, 0x01); /* XLPG */
}
/*
** Name: SetCometOps
** Description: Set up the selected Comet's clock edge drive for both
** the transmit out the analog side and receive to the
** backplane side.
** Returns: Nothing
*/
#if 0
STATIC void
SetCometOps (comet_t * comet)
{
volatile u_int8_t rd_value;
if (comet == mConfig.C4Func1Base + (COMET0_OFFSET >> 2))
{
rd_value = (u_int8_t) pci_read_32 ((u_int32_t *) &comet->brif_cfg); /* read the BRIF
* Configuration */
rd_value &= ~0x20;
pci_write_32 ((u_int32_t *) &comet->brif_cfg, (u_int32_t) rd_value);
rd_value = (u_int8_t) pci_read_32 ((u_int32_t *) &comet->brif_fpcfg); /* read the BRIF Frame
* Pulse Configuration */
rd_value &= ~0x20;
pci_write_32 ((u_int32_t *) &comet->brif_fpcfg, (u_int8_t) rd_value);
} else
{
rd_value = (u_int8_t) pci_read_32 ((u_int32_t *) &comet->brif_cfg); /* read the BRIF
* Configuration */
rd_value |= 0x20;
pci_write_32 ((u_int32_t *) &comet->brif_cfg, (u_int32_t) rd_value);
rd_value = (u_int8_t) pci_read_32 ((u_int32_t *) &comet->brif_fpcfg); /* read the BRIF Frame
* Pulse Configuration */
rd_value |= 0x20;
pci_write_32 ((u_int32_t *) &comet->brif_fpcfg, (u_int8_t) rd_value);
}
}
#endif
/*** End-of-File ***/
|