Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 | /* DVB USB compliant Linux driver for the
* - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
*
* Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
* Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com)
*
* Thanks to GENPIX for the sample code used to implement this module.
*
* This module is based off the vp7045 and vp702x modules
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
* see Documentation/dvb/README.dvb-usb for more information
*/
#include "gp8psk.h"
/* debug */
static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw";
int dvb_usb_gp8psk_debug;
module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
{
int ret = 0,try = 0;
if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
return ret;
while (ret >= 0 && ret != blen && try < 3) {
ret = usb_control_msg(d->udev,
usb_rcvctrlpipe(d->udev,0),
req,
USB_TYPE_VENDOR | USB_DIR_IN,
value,index,b,blen,
2000);
deb_info("reading number %d (ret: %d)\n",try,ret);
try++;
}
if (ret < 0 || ret != blen) {
warn("usb in %d operation failed.", req);
ret = -EIO;
} else
ret = 0;
deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
debug_dump(b,blen,deb_xfer);
mutex_unlock(&d->usb_mutex);
return ret;
}
int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
u16 index, u8 *b, int blen)
{
int ret;
deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
debug_dump(b,blen,deb_xfer);
if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
return ret;
if (usb_control_msg(d->udev,
usb_sndctrlpipe(d->udev,0),
req,
USB_TYPE_VENDOR | USB_DIR_OUT,
value,index,b,blen,
2000) != blen) {
warn("usb out operation failed.");
ret = -EIO;
} else
ret = 0;
mutex_unlock(&d->usb_mutex);
return ret;
}
static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
{
int ret;
const struct firmware *fw = NULL;
const u8 *ptr;
u8 *buf;
if ((ret = request_firmware(&fw, bcm4500_firmware,
&d->udev->dev)) != 0) {
err("did not find the bcm4500 firmware file. (%s) "
"Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
bcm4500_firmware,ret);
return ret;
}
ret = -EINVAL;
if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0))
goto out_rel_fw;
info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware);
ptr = fw->data;
buf = kmalloc(64, GFP_KERNEL | GFP_DMA);
while (ptr[0] != 0xff) {
u16 buflen = ptr[0] + 4;
if (ptr + buflen >= fw->data + fw->size) {
err("failed to load bcm4500 firmware.");
goto out_free;
}
memcpy(buf, ptr, buflen);
if (dvb_usb_generic_write(d, buf, buflen)) {
err("failed to load bcm4500 firmware.");
goto out_free;
}
ptr += buflen;
}
ret = 0;
out_free:
kfree(buf);
out_rel_fw:
release_firmware(fw);
return ret;
}
static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
{
u8 status, buf;
int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
if (onoff) {
gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
if (! (status & bm8pskStarted)) { /* started */
if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0);
if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
return -EINVAL;
}
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */
if(gp8psk_load_bcm4500fw(d))
return -EINVAL;
if (! (status & bmIntersilOn)) /* LNB Power */
if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
&buf, 1))
return -EINVAL;
/* Set DVB mode to 1 */
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
return -EINVAL;
/* Abort possible TS (if previous tune crashed) */
if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0))
return -EINVAL;
} else {
/* Turn off LNB power */
if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
return -EINVAL;
/* Turn off 8psk power */
if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
return -EINVAL;
if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
gp8psk_usb_out_op(d, CW3K_INIT, 0, 0, NULL, 0);
}
return 0;
}
int gp8psk_bcm4500_reload(struct dvb_usb_device *d)
{
u8 buf;
int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
/* Turn off 8psk power */
if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
return -EINVAL;
/* Turn On 8psk power */
if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
return -EINVAL;
/* load BCM4500 firmware */
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
if (gp8psk_load_bcm4500fw(d))
return -EINVAL;
return 0;
}
static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
return gp8psk_usb_out_op(adap->dev, ARM_TRANSFER, onoff, 0 , NULL, 0);
}
static int gp8psk_frontend_attach(struct dvb_usb_adapter *adap)
{
adap->fe = gp8psk_fe_attach(adap->dev);
return 0;
}
static struct dvb_usb_device_properties gp8psk_properties;
static int gp8psk_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
int ret;
struct usb_device *udev = interface_to_usbdev(intf);
ret = dvb_usb_device_init(intf, &gp8psk_properties,
THIS_MODULE, NULL, adapter_nr);
if (ret == 0) {
info("found Genpix USB device pID = %x (hex)",
le16_to_cpu(udev->descriptor.idProduct));
}
return ret;
}
static struct usb_device_id gp8psk_usb_table [] = {
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_COLD) },
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) },
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) },
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) },
/* { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) }, */
{ 0 },
};
MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);
static struct dvb_usb_device_properties gp8psk_properties = {
.usb_ctrl = CYPRESS_FX2,
.firmware = "dvb-usb-gp8psk-01.fw",
.num_adapters = 1,
.adapter = {
{
.streaming_ctrl = gp8psk_streaming_ctrl,
.frontend_attach = gp8psk_frontend_attach,
/* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
.count = 7,
.endpoint = 0x82,
.u = {
.bulk = {
.buffersize = 8192,
}
}
},
}
},
.power_ctrl = gp8psk_power_ctrl,
.generic_bulk_ctrl_endpoint = 0x01,
.num_device_descs = 3,
.devices = {
{ .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver",
.cold_ids = { &gp8psk_usb_table[0], NULL },
.warm_ids = { &gp8psk_usb_table[1], NULL },
},
{ .name = "Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver",
.cold_ids = { NULL },
.warm_ids = { &gp8psk_usb_table[2], NULL },
},
{ .name = "Genpix SkyWalker-1 DVB-S receiver",
.cold_ids = { NULL },
.warm_ids = { &gp8psk_usb_table[3], NULL },
},
{ NULL },
}
};
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver gp8psk_usb_driver = {
.name = "dvb_usb_gp8psk",
.probe = gp8psk_usb_probe,
.disconnect = dvb_usb_device_exit,
.id_table = gp8psk_usb_table,
};
/* module stuff */
static int __init gp8psk_usb_module_init(void)
{
int result;
if ((result = usb_register(&gp8psk_usb_driver))) {
err("usb_register failed. (%d)",result);
return result;
}
return 0;
}
static void __exit gp8psk_usb_module_exit(void)
{
/* deregister this driver from the USB subsystem */
usb_deregister(&gp8psk_usb_driver);
}
module_init(gp8psk_usb_module_init);
module_exit(gp8psk_usb_module_exit);
MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>");
MODULE_DESCRIPTION("Driver for Genpix 8psk-to-USB2 DVB-S");
MODULE_VERSION("1.1");
MODULE_LICENSE("GPL");
|