Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 | /*
* Low-Level PCI Support for the SH7780
*
* Copyright (C) 2005 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include "pci-sh4.h"
static struct resource sh7785_io_resource = {
.name = "SH7785_IO",
.start = SH7780_PCI_IO_BASE,
.end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO
};
static struct resource sh7785_mem_resource = {
.name = "SH7785_mem",
.start = SH7780_PCI_MEMORY_BASE,
.end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
.flags = IORESOURCE_MEM
};
static struct pci_channel sh7780_pci_controller = {
.pci_ops = &sh4_pci_ops,
.mem_resource = &sh7785_mem_resource,
.mem_offset = 0x00000000,
.io_resource = &sh7785_io_resource,
.io_offset = 0x00000000,
.io_map_base = SH7780_PCI_IO_BASE,
};
static struct sh4_pci_address_map sh7780_pci_map = {
.window0 = {
#if defined(CONFIG_32BIT)
.base = SH7780_32BIT_DDR_BASE_ADDR,
.size = 0x40000000,
#else
.base = SH7780_CS0_BASE_ADDR,
.size = 0x20000000,
#endif
},
};
static int __init sh7780_pci_init(void)
{
struct pci_channel *chan = &sh7780_pci_controller;
unsigned int id;
const char *type = NULL;
int ret;
u32 word;
printk(KERN_NOTICE "PCI: Starting intialization.\n");
chan->reg_base = 0xfe040000;
/* Enable CPU access to the PCIC registers. */
__raw_writel(PCIECR_ENBL, PCIECR);
id = __raw_readw(chan->reg_base + SH7780_PCIVID);
if (id != SH7780_VENDOR_ID) {
printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
return -ENODEV;
}
id = __raw_readw(chan->reg_base + SH7780_PCIDID);
type = (id == SH7763_DEVICE_ID) ? "SH7763" :
(id == SH7780_DEVICE_ID) ? "SH7780" :
(id == SH7781_DEVICE_ID) ? "SH7781" :
(id == SH7785_DEVICE_ID) ? "SH7785" :
NULL;
if (unlikely(!type)) {
printk(KERN_ERR "PCI: Found an unsupported Renesas host "
"controller, device id 0x%04x.\n", id);
return -EINVAL;
}
printk(KERN_NOTICE "PCI: Found a Renesas %s host "
"controller, revision %d.\n", type,
__raw_readb(chan->reg_base + SH7780_PCIRID));
if ((ret = sh4_pci_check_direct(chan)) != 0)
return ret;
/*
* Set the class and sub-class codes.
*/
__raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8,
chan->reg_base + SH7780_PCIBCC);
__raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff,
chan->reg_base + SH7780_PCISUB);
/*
* Set IO and Mem windows to local address
* Make PCI and local address the same for easy 1 to 1 mapping
*/
pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
/* Set the values on window 0 PCI config registers */
pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
/* Set up standard PCI config registers */
__raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
__raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
__raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
__raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
__raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
/* Apply any last-minute PCIC fixups */
pci_fixup_pcic(chan);
pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
#ifdef CONFIG_32BIT
pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
#endif
/* Set IOBR for windows containing area specified in pci.h */
pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
SH7780_PCIIOBR);
pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
SH7780_PCIIOBMR);
/* SH7780 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
pci_write_reg(chan, word, SH4_PCICR);
register_pci_controller(chan);
return 0;
}
arch_initcall(sh7780_pci_init);
|