Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 | /*
* linux/arch/arm/plat-omap/cpu-omap.c
*
* CPU frequency scaling for OMAP
*
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
* Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/clock.h>
#include <asm/system.h>
#define VERY_HI_RATE 900000000
static struct cpufreq_frequency_table *freq_table;
#ifdef CONFIG_ARCH_OMAP1
#define MPU_CLK "mpu"
#else
#define MPU_CLK "virt_prcm_set"
#endif
static struct clk *mpu_clk;
/* TODO: Add support for SDRAM timing changes */
int omap_verify_speed(struct cpufreq_policy *policy)
{
if (freq_table)
return cpufreq_frequency_table_verify(policy, freq_table);
if (policy->cpu)
return -EINVAL;
cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
policy->cpuinfo.max_freq);
policy->min = clk_round_rate(mpu_clk, policy->min * 1000) / 1000;
policy->max = clk_round_rate(mpu_clk, policy->max * 1000) / 1000;
cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
policy->cpuinfo.max_freq);
return 0;
}
unsigned int omap_getspeed(unsigned int cpu)
{
unsigned long rate;
if (cpu)
return 0;
rate = clk_get_rate(mpu_clk) / 1000;
return rate;
}
static int omap_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
struct cpufreq_freqs freqs;
int ret = 0;
/* Ensure desired rate is within allowed range. Some govenors
* (ondemand) will just pass target_freq=0 to get the minimum. */
if (target_freq < policy->min)
target_freq = policy->min;
if (target_freq > policy->max)
target_freq = policy->max;
freqs.old = omap_getspeed(0);
freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
freqs.cpu = 0;
if (freqs.old == freqs.new)
return ret;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
#ifdef CONFIG_CPU_FREQ_DEBUG
printk(KERN_DEBUG "cpufreq-omap: transition: %u --> %u\n",
freqs.old, freqs.new);
#endif
ret = clk_set_rate(mpu_clk, freqs.new * 1000);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return ret;
}
static int __init omap_cpu_init(struct cpufreq_policy *policy)
{
int result = 0;
mpu_clk = clk_get(NULL, MPU_CLK);
if (IS_ERR(mpu_clk))
return PTR_ERR(mpu_clk);
if (policy->cpu != 0)
return -EINVAL;
policy->cur = policy->min = policy->max = omap_getspeed(0);
clk_init_cpufreq_table(&freq_table);
if (freq_table) {
result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
if (!result)
cpufreq_frequency_table_get_attr(freq_table,
policy->cpu);
} else {
policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
policy->cpuinfo.max_freq = clk_round_rate(mpu_clk,
VERY_HI_RATE) / 1000;
}
/* FIXME: what's the actual transition time? */
policy->cpuinfo.transition_latency = 300 * 1000;
return 0;
}
static int omap_cpu_exit(struct cpufreq_policy *policy)
{
clk_put(mpu_clk);
return 0;
}
static struct freq_attr *omap_cpufreq_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
static struct cpufreq_driver omap_driver = {
.flags = CPUFREQ_STICKY,
.verify = omap_verify_speed,
.target = omap_target,
.get = omap_getspeed,
.init = omap_cpu_init,
.exit = omap_cpu_exit,
.name = "omap",
.attr = omap_cpufreq_attr,
};
static int __init omap_cpufreq_init(void)
{
return cpufreq_register_driver(&omap_driver);
}
arch_initcall(omap_cpufreq_init);
/*
* if ever we want to remove this, upon cleanup call:
*
* cpufreq_unregister_driver()
* cpufreq_frequency_table_put_attr()
*/
|