Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 | /*
* Platform information definitions.
*
* Copied from arch/ppc/syslib/cpm2_pic.c with minor subsequent updates
* to make in work in arch/powerpc/. Original (c) belongs to Dan Malek.
*
* Author: Vitaly Bordug <vbordug@ru.mvista.com>
*
* 1999-2001 (c) Dan Malek <dan@embeddedalley.com>
* 2006 (c) MontaVista Software, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/* The CPM2 internal interrupt controller. It is usually
* the only interrupt controller.
* There are two 32-bit registers (high/low) for up to 64
* possible interrupts.
*
* Now, the fun starts.....Interrupt Numbers DO NOT MAP
* in a simple arithmetic fashion to mask or pending registers.
* That is, interrupt 4 does not map to bit position 4.
* We create two tables, indexed by vector number, to indicate
* which register to use and which bit in the register to use.
*/
#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/irq.h>
#include <asm/immap_cpm2.h>
#include <asm/mpc8260.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/fs_pd.h>
#include "cpm2_pic.h"
/* External IRQS */
#define CPM2_IRQ_EXT1 19
#define CPM2_IRQ_EXT7 25
/* Port C IRQS */
#define CPM2_IRQ_PORTC15 48
#define CPM2_IRQ_PORTC0 63
static intctl_cpm2_t __iomem *cpm2_intctl;
static struct irq_host *cpm2_pic_host;
#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
static const u_char irq_to_siureg[] = {
1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0
};
/* bit numbers do not match the docs, these are precomputed so the bit for
* a given irq is (1 << irq_to_siubit[irq]) */
static const u_char irq_to_siubit[] = {
0, 15, 14, 13, 12, 11, 10, 9,
8, 7, 6, 5, 4, 3, 2, 1,
2, 1, 0, 14, 13, 12, 11, 10,
9, 8, 7, 6, 5, 4, 3, 0,
31, 30, 29, 28, 27, 26, 25, 24,
23, 22, 21, 20, 19, 18, 17, 16,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
};
static void cpm2_mask_irq(unsigned int virq)
{
int bit, word;
unsigned int irq_nr = virq_to_hw(virq);
bit = irq_to_siubit[irq_nr];
word = irq_to_siureg[irq_nr];
ppc_cached_irq_mask[word] &= ~(1 << bit);
out_be32(&cpm2_intctl->ic_simrh + word, ppc_cached_irq_mask[word]);
}
static void cpm2_unmask_irq(unsigned int virq)
{
int bit, word;
unsigned int irq_nr = virq_to_hw(virq);
bit = irq_to_siubit[irq_nr];
word = irq_to_siureg[irq_nr];
ppc_cached_irq_mask[word] |= 1 << bit;
out_be32(&cpm2_intctl->ic_simrh + word, ppc_cached_irq_mask[word]);
}
static void cpm2_ack(unsigned int virq)
{
int bit, word;
unsigned int irq_nr = virq_to_hw(virq);
bit = irq_to_siubit[irq_nr];
word = irq_to_siureg[irq_nr];
out_be32(&cpm2_intctl->ic_sipnrh + word, 1 << bit);
}
static void cpm2_end_irq(unsigned int virq)
{
int bit, word;
unsigned int irq_nr = virq_to_hw(virq);
if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
&& irq_desc[irq_nr].action) {
bit = irq_to_siubit[irq_nr];
word = irq_to_siureg[irq_nr];
ppc_cached_irq_mask[word] |= 1 << bit;
out_be32(&cpm2_intctl->ic_simrh + word, ppc_cached_irq_mask[word]);
/*
* Work around large numbers of spurious IRQs on PowerPC 82xx
* systems.
*/
mb();
}
}
static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type)
{
unsigned int src = virq_to_hw(virq);
struct irq_desc *desc = get_irq_desc(virq);
unsigned int vold, vnew, edibit;
if (flow_type == IRQ_TYPE_NONE)
flow_type = IRQ_TYPE_LEVEL_LOW;
if (flow_type & IRQ_TYPE_EDGE_RISING) {
printk(KERN_ERR "CPM2 PIC: sense type 0x%x not supported\n",
flow_type);
return -EINVAL;
}
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
if (flow_type & IRQ_TYPE_LEVEL_LOW) {
desc->status |= IRQ_LEVEL;
desc->handle_irq = handle_level_irq;
} else
desc->handle_irq = handle_edge_irq;
/* internal IRQ senses are LEVEL_LOW
* EXT IRQ and Port C IRQ senses are programmable
*/
if (src >= CPM2_IRQ_EXT1 && src <= CPM2_IRQ_EXT7)
edibit = (14 - (src - CPM2_IRQ_EXT1));
else
if (src >= CPM2_IRQ_PORTC15 && src <= CPM2_IRQ_PORTC0)
edibit = (31 - (src - CPM2_IRQ_PORTC15));
else
return (flow_type & IRQ_TYPE_LEVEL_LOW) ? 0 : -EINVAL;
vold = in_be32(&cpm2_intctl->ic_siexr);
if ((flow_type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_FALLING)
vnew = vold | (1 << edibit);
else
vnew = vold & ~(1 << edibit);
if (vold != vnew)
out_be32(&cpm2_intctl->ic_siexr, vnew);
return 0;
}
static struct irq_chip cpm2_pic = {
.typename = " CPM2 SIU ",
.mask = cpm2_mask_irq,
.unmask = cpm2_unmask_irq,
.ack = cpm2_ack,
.eoi = cpm2_end_irq,
.set_type = cpm2_set_irq_type,
};
unsigned int cpm2_get_irq(void)
{
int irq;
unsigned long bits;
/* For CPM2, read the SIVEC register and shift the bits down
* to get the irq number. */
bits = in_be32(&cpm2_intctl->ic_sivec);
irq = bits >> 26;
if (irq == 0)
return(-1);
return irq_linear_revmap(cpm2_pic_host, irq);
}
static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
pr_debug("cpm2_pic_host_map(%d, 0x%lx)\n", virq, hw);
get_irq_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &cpm2_pic, handle_level_irq);
return 0;
}
static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct,
u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
*out_hwirq = intspec[0];
if (intsize > 1)
*out_flags = intspec[1];
else
*out_flags = IRQ_TYPE_NONE;
return 0;
}
static struct irq_host_ops cpm2_pic_host_ops = {
.map = cpm2_pic_host_map,
.xlate = cpm2_pic_host_xlate,
};
void cpm2_pic_init(struct device_node *node)
{
int i;
cpm2_intctl = cpm2_map(im_intctl);
/* Clear the CPM IRQ controller, in case it has any bits set
* from the bootloader
*/
/* Mask out everything */
out_be32(&cpm2_intctl->ic_simrh, 0x00000000);
out_be32(&cpm2_intctl->ic_simrl, 0x00000000);
wmb();
/* Ack everything */
out_be32(&cpm2_intctl->ic_sipnrh, 0xffffffff);
out_be32(&cpm2_intctl->ic_sipnrl, 0xffffffff);
wmb();
/* Dummy read of the vector */
i = in_be32(&cpm2_intctl->ic_sivec);
rmb();
/* Initialize the default interrupt mapping priorities,
* in case the boot rom changed something on us.
*/
out_be16(&cpm2_intctl->ic_sicr, 0);
out_be32(&cpm2_intctl->ic_scprrh, 0x05309770);
out_be32(&cpm2_intctl->ic_scprrl, 0x05309770);
/* create a legacy host */
cpm2_pic_host = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
64, &cpm2_pic_host_ops, 64);
if (cpm2_pic_host == NULL) {
printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
return;
}
}
|