Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 | /*
* Board setup routines for the storcenter
*
* Copyright 2007 (C) Oyvind Repvik (nail@nslu2-linux.org)
* Copyright 2007 Andy Wilcox, Jon Loeliger
*
* Based on linkstation.c by G. Liakhovetski
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of
* any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/initrd.h>
#include <linux/mtd/physmap.h>
#include <linux/of_platform.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/prom.h>
#include <asm/mpic.h>
#include <asm/pci-bridge.h>
#include "mpc10x.h"
#ifdef CONFIG_MTD_PHYSMAP
static struct mtd_partition storcenter_physmap_partitions[] = {
{
.name = "kernel",
.offset = 0x000000,
.size = 0x170000,
},
{
.name = "rootfs",
.offset = 0x170000,
.size = 0x590000,
},
{
.name = "uboot",
.offset = 0x700000,
.size = 0x040000,
},
{
.name = "config",
.offset = 0x740000,
.size = 0x0c0000,
},
};
#endif
static __initdata struct of_device_id storcenter_of_bus[] = {
{ .name = "soc", },
{},
};
static int __init storcenter_device_probe(void)
{
of_platform_bus_probe(NULL, storcenter_of_bus, NULL);
return 0;
}
machine_device_initcall(storcenter, storcenter_device_probe);
static int __init storcenter_add_bridge(struct device_node *dev)
{
#ifdef CONFIG_PCI
int len;
struct pci_controller *hose;
const int *bus_range;
printk("Adding PCI host bridge %s\n", dev->full_name);
hose = pcibios_alloc_controller(dev);
if (hose == NULL)
return -ENOMEM;
bus_range = of_get_property(dev, "bus-range", &len);
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
setup_indirect_pci(hose, MPC10X_MAPB_CNFG_ADDR, MPC10X_MAPB_CNFG_DATA, 0);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
pci_process_bridge_OF_ranges(hose, dev, 1);
#endif
return 0;
}
static void __init storcenter_setup_arch(void)
{
struct device_node *np;
#ifdef CONFIG_MTD_PHYSMAP
physmap_set_partitions(storcenter_physmap_partitions,
ARRAY_SIZE(storcenter_physmap_partitions));
#endif
/* Lookup PCI host bridges */
for_each_compatible_node(np, "pci", "mpc10x-pci")
storcenter_add_bridge(np);
printk(KERN_INFO "IOMEGA StorCenter\n");
}
/*
* Interrupt setup and service. Interrrupts on the turbostation come
* from the four PCI slots plus onboard 8241 devices: I2C, DUART.
*/
static void __init storcenter_init_IRQ(void)
{
struct mpic *mpic;
struct device_node *dnp;
const void *prop;
int size;
phys_addr_t paddr;
dnp = of_find_node_by_type(NULL, "open-pic");
if (dnp == NULL)
return;
prop = of_get_property(dnp, "reg", &size);
if (prop == NULL) {
of_node_put(dnp);
return;
}
paddr = (phys_addr_t)of_translate_address(dnp, prop);
mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET,
16, 32, " OpenPIC ");
of_node_put(dnp);
BUG_ON(mpic == NULL);
/*
* 16 Serial Interrupts followed by 16 Internal Interrupts.
* I2C is the second internal, so it is at 17, 0x11020.
*/
mpic_assign_isu(mpic, 0, paddr + 0x10200);
mpic_assign_isu(mpic, 1, paddr + 0x11000);
mpic_init(mpic);
}
static void storcenter_restart(char *cmd)
{
local_irq_disable();
/* Set exception prefix high - to the firmware */
_nmask_and_or_msr(0, MSR_IP);
/* Wait for reset to happen */
for (;;) ;
}
static int __init storcenter_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "iomega,storcenter");
}
define_machine(storcenter){
.name = "IOMEGA StorCenter",
.probe = storcenter_probe,
.setup_arch = storcenter_setup_arch,
.init_IRQ = storcenter_init_IRQ,
.get_irq = mpic_get_irq,
.restart = storcenter_restart,
.calibrate_decr = generic_calibrate_decr,
};
|