Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 | /*
* PCI Express Hot Plug Controller Driver
*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
* Copyright (C) 2003-2004 Intel Corporation
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include "../pci.h"
#include "pciehp.h"
static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
{
u16 pci_cmd, pci_bctl;
if (hpp->revision > 1) {
printk(KERN_WARNING "%s: Rev.%d type0 record not supported\n",
__func__, hpp->revision);
return;
}
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer);
pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
if (hpp->enable_serr)
pci_cmd |= PCI_COMMAND_SERR;
else
pci_cmd &= ~PCI_COMMAND_SERR;
if (hpp->enable_perr)
pci_cmd |= PCI_COMMAND_PARITY;
else
pci_cmd &= ~PCI_COMMAND_PARITY;
pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
/* Program bridge control value */
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
hpp->latency_timer);
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
if (hpp->enable_serr)
pci_bctl |= PCI_BRIDGE_CTL_SERR;
else
pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
if (hpp->enable_perr)
pci_bctl |= PCI_BRIDGE_CTL_PARITY;
else
pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
}
}
static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
{
int pos;
u16 reg16;
u32 reg32;
if (hpp->revision > 1) {
printk(KERN_WARNING "%s: Rev.%d type2 record not supported\n",
__func__, hpp->revision);
return;
}
/* Find PCI Express capability */
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
if (!pos)
return;
/* Initialize Device Control Register */
pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, ®16);
reg16 = (reg16 & hpp->pci_exp_devctl_and) | hpp->pci_exp_devctl_or;
pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, reg16);
/* Initialize Link Control Register */
if (dev->subordinate) {
pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, ®16);
reg16 = (reg16 & hpp->pci_exp_lnkctl_and)
| hpp->pci_exp_lnkctl_or;
pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, reg16);
}
/* Find Advanced Error Reporting Enhanced Capability */
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
if (!pos)
return;
/* Initialize Uncorrectable Error Mask Register */
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, ®32);
reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or;
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32);
/* Initialize Uncorrectable Error Severity Register */
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, ®32);
reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or;
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32);
/* Initialize Correctable Error Mask Register */
pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®32);
reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or;
pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32);
/* Initialize Advanced Error Capabilities and Control Register */
pci_read_config_dword(dev, pos + PCI_ERR_CAP, ®32);
reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or;
pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
/*
* FIXME: The following two registers are not supported yet.
*
* o Secondary Uncorrectable Error Severity Register
* o Secondary Uncorrectable Error Mask Register
*/
}
static void program_fw_provided_values(struct pci_dev *dev)
{
struct pci_dev *cdev;
struct hotplug_params hpp;
/* Program hpp values for this device */
if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
return;
if (pciehp_get_hp_params_from_firmware(dev, &hpp)) {
printk(KERN_WARNING "%s: Could not get hotplug parameters\n",
__func__);
return;
}
if (hpp.t2)
program_hpp_type2(dev, hpp.t2);
if (hpp.t0)
program_hpp_type0(dev, hpp.t0);
/* Program child devices */
if (dev->subordinate) {
list_for_each_entry(cdev, &dev->subordinate->devices,
bus_list)
program_fw_provided_values(cdev);
}
}
static int __ref pciehp_add_bridge(struct pci_dev *dev)
{
struct pci_bus *parent = dev->bus;
int pass, busnr, start = parent->secondary;
int end = parent->subordinate;
for (busnr = start; busnr <= end; busnr++) {
if (!pci_find_bus(pci_domain_nr(parent), busnr))
break;
}
if (busnr-- > end) {
err("No bus number available for hot-added bridge %s\n",
pci_name(dev));
return -1;
}
for (pass = 0; pass < 2; pass++)
busnr = pci_scan_bridge(parent, dev, busnr, pass);
if (!dev->subordinate)
return -1;
pci_bus_size_bridges(dev->subordinate);
pci_bus_assign_resources(parent);
pci_enable_bridges(parent);
pci_bus_add_devices(parent);
return 0;
}
int pciehp_configure_device(struct slot *p_slot)
{
struct pci_dev *dev;
struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
int num, fn;
dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
if (dev) {
err("Device %s already exists at %x:%x, cannot hot-add\n",
pci_name(dev), p_slot->bus, p_slot->device);
pci_dev_put(dev);
return -EINVAL;
}
num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
if (num == 0) {
err("No new device found\n");
return -ENODEV;
}
for (fn = 0; fn < 8; fn++) {
dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
if (!dev)
continue;
if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
err("Cannot hot-add display device %s\n",
pci_name(dev));
pci_dev_put(dev);
continue;
}
if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
pciehp_add_bridge(dev);
}
program_fw_provided_values(dev);
pci_dev_put(dev);
}
pci_bus_assign_resources(parent);
pci_bus_add_devices(parent);
return 0;
}
int pciehp_unconfigure_device(struct slot *p_slot)
{
int ret, rc = 0;
int j;
u8 bctl = 0;
u8 presence = 0;
struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
u16 command;
dbg("%s: bus/dev = %x/%x\n", __func__, p_slot->bus,
p_slot->device);
ret = p_slot->hpc_ops->get_adapter_status(p_slot, &presence);
if (ret)
presence = 0;
for (j = 0; j < 8; j++) {
struct pci_dev* temp = pci_get_slot(parent,
(p_slot->device << 3) | j);
if (!temp)
continue;
if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
err("Cannot remove display device %s\n",
pci_name(temp));
pci_dev_put(temp);
continue;
}
if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
if (bctl & PCI_BRIDGE_CTL_VGA) {
err("Cannot remove display device %s\n",
pci_name(temp));
pci_dev_put(temp);
continue;
}
}
pci_remove_bus_device(temp);
/*
* Ensure that no new Requests will be generated from
* the device.
*/
if (presence) {
pci_read_config_word(temp, PCI_COMMAND, &command);
command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
command |= PCI_COMMAND_INTX_DISABLE;
pci_write_config_word(temp, PCI_COMMAND, command);
}
pci_dev_put(temp);
}
/*
* Some PCI Express root ports require fixup after hot-plug operation.
*/
if (pcie_mch_quirk)
pci_fixup_device(pci_fixup_final, p_slot->ctrl->pci_dev);
return rc;
}
|