/*
 *  linux/arch/m68knommu/kernel/ptrace.c
 *
 *  Copyright (C) 1994 by Hamish Macdonald
 *  Taken from linux/kernel/ptrace.c and modified for M680x0.
 *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
 *
 * This file is subject to the terms and conditions of the GNU General
 * Public License.  See the file COPYING in the main directory of
 * this archive for more details.
 */

#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/signal.h>

#include <asm/uaccess.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/processor.h>

/*
 * does not yet catch signals sent when the child dies.
 * in exit.c or in signal.c.
 */

/* determines which bits in the SR the user has access to. */
/* 1 = access 0 = no access */
#define SR_MASK 0x001f

/* sets the trace bits. */
#define TRACE_BITS 0x8000

/* Find the stack offset for a register, relative to thread.esp0. */
#define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
#define SW_REG(reg)	((long)&((struct switch_stack *)0)->reg \
			 - sizeof(struct switch_stack))
/* Mapping from PT_xxx to the stack offset at which the register is
   saved.  Notice that usp has no stack-slot and needs to be treated
   specially (see get_reg/put_reg below). */
static int regoff[] = {
	PT_REG(d1), PT_REG(d2), PT_REG(d3), PT_REG(d4),
	PT_REG(d5), SW_REG(d6), SW_REG(d7), PT_REG(a0),
	PT_REG(a1), PT_REG(a2), SW_REG(a3), SW_REG(a4),
	SW_REG(a5), SW_REG(a6), PT_REG(d0), -1,
	PT_REG(orig_d0), PT_REG(sr), PT_REG(pc),
};

/*
 * Get contents of register REGNO in task TASK.
 */
static inline long get_reg(struct task_struct *task, int regno)
{
	unsigned long *addr;

	if (regno == PT_USP)
		addr = &task->thread.usp;
	else if (regno < ARRAY_SIZE(regoff))
		addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
	else
		return 0;
	return *addr;
}

/*
 * Write contents of register REGNO in task TASK.
 */
static inline int put_reg(struct task_struct *task, int regno,
			  unsigned long data)
{
	unsigned long *addr;

	if (regno == PT_USP)
		addr = &task->thread.usp;
	else if (regno < ARRAY_SIZE(regoff))
		addr = (unsigned long *) (task->thread.esp0 + regoff[regno]);
	else
		return -1;
	*addr = data;
	return 0;
}

/*
 * Called by kernel/ptrace.c when detaching..
 *
 * Make sure the single step bit is not set.
 */
void ptrace_disable(struct task_struct *child)
{
	unsigned long tmp;
	/* make sure the single step bit is not set. */
	tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
	put_reg(child, PT_SR, tmp);
}

long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
	int ret;

	switch (request) {
		/* when I and D space are separate, these will need to be fixed. */
		case PTRACE_PEEKTEXT: /* read word at location addr. */ 
		case PTRACE_PEEKDATA:
			ret = generic_ptrace_peekdata(child, addr, data);
			break;

		/* read the word at location addr in the USER area. */
		case PTRACE_PEEKUSR: {
			unsigned long tmp;
			
			ret = -EIO;
			if ((addr & 3) || addr < 0 ||
			    addr > sizeof(struct user) - 3)
				break;
			
			tmp = 0;  /* Default return condition */
			addr = addr >> 2; /* temporary hack. */
			ret = -EIO;
			if (addr < 19) {
				tmp = get_reg(child, addr);
				if (addr == PT_SR)
					tmp >>= 16;
			} else if (addr >= 21 && addr < 49) {
				tmp = child->thread.fp[addr - 21];
#ifdef CONFIG_M68KFPU_EMU
				/* Convert internal fpu reg representation
				 * into long double format
				 */
				if (FPU_IS_EMU && (addr < 45) && !(addr % 3))
					tmp = ((tmp & 0xffff0000) << 15) |
					      ((tmp & 0x0000ffff) << 16);
#endif
			} else if (addr == 49) {
				tmp = child->mm->start_code;
			} else if (addr == 50) {
				tmp = child->mm->start_data;
			} else if (addr == 51) {
				tmp = child->mm->end_code;
			} else
				break;
			ret = put_user(tmp,(unsigned long *) data);
			break;
		}

		/* when I and D space are separate, this will have to be fixed. */
		case PTRACE_POKETEXT: /* write the word at location addr. */
		case PTRACE_POKEDATA:
			ret = generic_ptrace_pokedata(child, addr, data);
			break;

		case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
			ret = -EIO;
			if ((addr & 3) || addr < 0 ||
			    addr > sizeof(struct user) - 3)
				break;

			addr = addr >> 2; /* temporary hack. */
			    
			if (addr == PT_SR) {
				data &= SR_MASK;
				data <<= 16;
				data |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
			}
			if (addr < 19) {
				if (put_reg(child, addr, data))
					break;
				ret = 0;
				break;
			}
			if (addr >= 21 && addr < 48)
			{
#ifdef CONFIG_M68KFPU_EMU
				/* Convert long double format
				 * into internal fpu reg representation
				 */
				if (FPU_IS_EMU && (addr < 45) && !(addr % 3)) {
					data = (unsigned long)data << 15;
					data = (data & 0xffff0000) |
					       ((data & 0x0000ffff) >> 1);
				}
#endif
				child->thread.fp[addr - 21] = data;
				ret = 0;
			}
			break;

		case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
		case PTRACE_CONT: { /* restart after signal. */
			long tmp;

			ret = -EIO;
			if (!valid_signal(data))
				break;
			if (request == PTRACE_SYSCALL)
				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
			else
				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
			child->exit_code = data;
			/* make sure the single step bit is not set. */
			tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
			put_reg(child, PT_SR, tmp);
			wake_up_process(child);
			ret = 0;
			break;
		}

		/*
		 * make the child exit.  Best I can do is send it a sigkill. 
		 * perhaps it should be put in the status that it wants to 
		 * exit.
		 */
		case PTRACE_KILL: {
			long tmp;

			ret = 0;
			if (child->exit_state == EXIT_ZOMBIE) /* already dead */
				break;
			child->exit_code = SIGKILL;
			/* make sure the single step bit is not set. */
			tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
			put_reg(child, PT_SR, tmp);
			wake_up_process(child);
			break;
		}

		case PTRACE_SINGLESTEP: {  /* set the trap flag. */
			long tmp;

			ret = -EIO;
			if (!valid_signal(data))
				break;
			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
			tmp = get_reg(child, PT_SR) | (TRACE_BITS << 16);
			put_reg(child, PT_SR, tmp);

			child->exit_code = data;
			/* give it a chance to run. */
			wake_up_process(child);
			ret = 0;
			break;
		}

		case PTRACE_DETACH:	/* detach a process that was attached. */
			ret = ptrace_detach(child, data);
			break;

		case PTRACE_GETREGS: { /* Get all gp regs from the child. */
		  	int i;
			unsigned long tmp;
			for (i = 0; i < 19; i++) {
			    tmp = get_reg(child, i);
			    if (i == PT_SR)
				tmp >>= 16;
			    if (put_user(tmp, (unsigned long *) data)) {
				ret = -EFAULT;
				break;
			    }
			    data += sizeof(long);
			}
			ret = 0;
			break;
		}

		case PTRACE_SETREGS: { /* Set all gp regs in the child. */
			int i;
			unsigned long tmp;
			for (i = 0; i < 19; i++) {
			    if (get_user(tmp, (unsigned long *) data)) {
				ret = -EFAULT;
				break;
			    }
			    if (i == PT_SR) {
				tmp &= SR_MASK;
				tmp <<= 16;
				tmp |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
			    }
			    put_reg(child, i, tmp);
			    data += sizeof(long);
			}
			ret = 0;
			break;
		}

#ifdef PTRACE_GETFPREGS
		case PTRACE_GETFPREGS: { /* Get the child FPU state. */
			ret = 0;
			if (copy_to_user((void *)data, &child->thread.fp,
					 sizeof(struct user_m68kfp_struct)))
				ret = -EFAULT;
			break;
		}
#endif

#ifdef PTRACE_SETFPREGS
		case PTRACE_SETFPREGS: { /* Set the child FPU state. */
			ret = 0;
			if (copy_from_user(&child->thread.fp, (void *)data,
					   sizeof(struct user_m68kfp_struct)))
				ret = -EFAULT;
			break;
		}
#endif

		default:
			ret = -EIO;
			break;
	}
	return ret;
}

asmlinkage void syscall_trace(void)
{
	if (!test_thread_flag(TIF_SYSCALL_TRACE))
		return;
	if (!(current->ptrace & PT_PTRACED))
		return;
	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
				 ? 0x80 : 0));
	/*
	 * this isn't the same as continuing with a signal, but it will do
	 * for normal use.  strace only continues with a signal if the
	 * stopping signal is not SIGTRAP.  -brl
	 */
	if (current->exit_code) {
		send_sig(current->exit_code, current, 1);
		current->exit_code = 0;
	}
}