Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Loading...
   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
/********************************************************************
 Filename:      via-ircc.c
 Version:       1.0 
 Description:   Driver for the VIA VT8231/VT8233 IrDA chipsets
 Author:        VIA Technologies,inc
 Date  :	08/06/2003

Copyright (c) 1998-2003 VIA Technologies, Inc.

This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTIES OR REPRESENTATIONS; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

F01 Oct/02/02: Modify code for V0.11(move out back to back transfer)
F02 Oct/28/02: Add SB device ID for 3147 and 3177.
 Comment :
       jul/09/2002 : only implement two kind of dongle currently.
       Oct/02/2002 : work on VT8231 and VT8233 .
       Aug/06/2003 : change driver format to pci driver .

2004-02-16: <sda@bdit.de>
- Removed unneeded 'legacy' pci stuff.
- Make sure SIR mode is set (hw_init()) before calling mode-dependant stuff.
- On speed change from core, don't send SIR frame with new speed. 
  Use current speed and change speeds later.
- Make module-param dongle_id actually work.
- New dongle_id 17 (0x11): TDFS4500. Single-ended SIR only. 
  Tested with home-grown PCB on EPIA boards.
- Code cleanup.
       
 ********************************************************************/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/rtnetlink.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>

#include <asm/io.h>
#include <asm/dma.h>
#include <asm/byteorder.h>

#include <linux/pm.h>

#include <net/irda/wrapper.h>
#include <net/irda/irda.h>
#include <net/irda/irda_device.h>

#include "via-ircc.h"

#define VIA_MODULE_NAME "via-ircc"
#define CHIP_IO_EXTENT 0x40

static char *driver_name = VIA_MODULE_NAME;

/* Module parameters */
static int qos_mtt_bits = 0x07;	/* 1 ms or more */
static int dongle_id = 0;	/* default: probe */

/* We can't guess the type of connected dongle, user *must* supply it. */
module_param(dongle_id, int, 0);

/* FIXME : we should not need this, because instances should be automatically
 * managed by the PCI layer. Especially that we seem to only be using the
 * first entry. Jean II */
/* Max 4 instances for now */
static struct via_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };

/* Some prototypes */
static int via_ircc_open(int i, chipio_t * info, unsigned int id);
static int via_ircc_close(struct via_ircc_cb *self);
static int via_ircc_dma_receive(struct via_ircc_cb *self);
static int via_ircc_dma_receive_complete(struct via_ircc_cb *self,
					 int iobase);
static int via_ircc_hard_xmit_sir(struct sk_buff *skb,
				  struct net_device *dev);
static int via_ircc_hard_xmit_fir(struct sk_buff *skb,
				  struct net_device *dev);
static void via_hw_init(struct via_ircc_cb *self);
static void via_ircc_change_speed(struct via_ircc_cb *self, __u32 baud);
static irqreturn_t via_ircc_interrupt(int irq, void *dev_id);
static int via_ircc_is_receiving(struct via_ircc_cb *self);
static int via_ircc_read_dongle_id(int iobase);

static int via_ircc_net_open(struct net_device *dev);
static int via_ircc_net_close(struct net_device *dev);
static int via_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq,
			      int cmd);
static struct net_device_stats *via_ircc_net_get_stats(struct net_device
						       *dev);
static void via_ircc_change_dongle_speed(int iobase, int speed,
					 int dongle_id);
static int RxTimerHandler(struct via_ircc_cb *self, int iobase);
static void hwreset(struct via_ircc_cb *self);
static int via_ircc_dma_xmit(struct via_ircc_cb *self, u16 iobase);
static int upload_rxdata(struct via_ircc_cb *self, int iobase);
static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_device_id *id);
static void __devexit via_remove_one (struct pci_dev *pdev);

/* FIXME : Should use udelay() instead, even if we are x86 only - Jean II */
static void iodelay(int udelay)
{
	u8 data;
	int i;

	for (i = 0; i < udelay; i++) {
		data = inb(0x80);
	}
}

static struct pci_device_id via_pci_tbl[] = {
	{ PCI_VENDOR_ID_VIA, 0x8231, PCI_ANY_ID, PCI_ANY_ID,0,0,0 },
	{ PCI_VENDOR_ID_VIA, 0x3109, PCI_ANY_ID, PCI_ANY_ID,0,0,1 },
	{ PCI_VENDOR_ID_VIA, 0x3074, PCI_ANY_ID, PCI_ANY_ID,0,0,2 },
	{ PCI_VENDOR_ID_VIA, 0x3147, PCI_ANY_ID, PCI_ANY_ID,0,0,3 },
	{ PCI_VENDOR_ID_VIA, 0x3177, PCI_ANY_ID, PCI_ANY_ID,0,0,4 },
	{ 0, }
};

MODULE_DEVICE_TABLE(pci,via_pci_tbl);


static struct pci_driver via_driver = {
	.name		= VIA_MODULE_NAME,
	.id_table	= via_pci_tbl,
	.probe		= via_init_one,
	.remove		= __devexit_p(via_remove_one),
};


/*
 * Function via_ircc_init ()
 *
 *    Initialize chip. Just find out chip type and resource.
 */
static int __init via_ircc_init(void)
{
	int rc;

	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);

	rc = pci_register_driver(&via_driver);
	if (rc < 0) {
		IRDA_DEBUG(0, "%s(): error rc = %d, returning  -ENODEV...\n",
			   __FUNCTION__, rc);
		return -ENODEV;
	}
	return 0;
}

static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_device_id *id)
{
	int rc;
        u8 temp,oldPCI_40,oldPCI_44,bTmp,bTmp1;
	u16 Chipset,FirDRQ1,FirDRQ0,FirIRQ,FirIOBase;
	chipio_t info;

	IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __FUNCTION__, id->device);

	rc = pci_enable_device (pcidev);
	if (rc) {
		IRDA_DEBUG(0, "%s(): error rc = %d\n", __FUNCTION__, rc);
		return -ENODEV;
	}

	// South Bridge exist
        if ( ReadLPCReg(0x20) != 0x3C )
		Chipset=0x3096;
	else
		Chipset=0x3076;

	if (Chipset==0x3076) {
		IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __FUNCTION__);

		WriteLPCReg(7,0x0c );
		temp=ReadLPCReg(0x30);//check if BIOS Enable Fir
		if((temp&0x01)==1) {   // BIOS close or no FIR
			WriteLPCReg(0x1d, 0x82 );
			WriteLPCReg(0x23,0x18);
			temp=ReadLPCReg(0xF0);
			if((temp&0x01)==0) {
				temp=(ReadLPCReg(0x74)&0x03);    //DMA
				FirDRQ0=temp + 4;
				temp=(ReadLPCReg(0x74)&0x0C) >> 2;
				FirDRQ1=temp + 4;
			} else {
				temp=(ReadLPCReg(0x74)&0x0C) >> 2;    //DMA
				FirDRQ0=temp + 4;
				FirDRQ1=FirDRQ0;
			}
			FirIRQ=(ReadLPCReg(0x70)&0x0f);		//IRQ
			FirIOBase=ReadLPCReg(0x60 ) << 8;	//IO Space :high byte
			FirIOBase=FirIOBase| ReadLPCReg(0x61) ;	//low byte
			FirIOBase=FirIOBase  ;
			info.fir_base=FirIOBase;
			info.irq=FirIRQ;
			info.dma=FirDRQ1;
			info.dma2=FirDRQ0;
			pci_read_config_byte(pcidev,0x40,&bTmp);
			pci_write_config_byte(pcidev,0x40,((bTmp | 0x08) & 0xfe));
			pci_read_config_byte(pcidev,0x42,&bTmp);
			pci_write_config_byte(pcidev,0x42,(bTmp | 0xf0));
			pci_write_config_byte(pcidev,0x5a,0xc0);
			WriteLPCReg(0x28, 0x70 );
			if (via_ircc_open(0, &info,0x3076) == 0)
				rc=0;
		} else
			rc = -ENODEV; //IR not turn on	 
	} else { //Not VT1211
		IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __FUNCTION__);

		pci_read_config_byte(pcidev,0x67,&bTmp);//check if BIOS Enable Fir
		if((bTmp&0x01)==1) {  // BIOS enable FIR
			//Enable Double DMA clock
			pci_read_config_byte(pcidev,0x42,&oldPCI_40);
			pci_write_config_byte(pcidev,0x42,oldPCI_40 | 0x80);
			pci_read_config_byte(pcidev,0x40,&oldPCI_40);
			pci_write_config_byte(pcidev,0x40,oldPCI_40 & 0xf7);
			pci_read_config_byte(pcidev,0x44,&oldPCI_44);
			pci_write_config_byte(pcidev,0x44,0x4e);
  //---------- read configuration from Function0 of south bridge
			if((bTmp&0x02)==0) {
				pci_read_config_byte(pcidev,0x44,&bTmp1); //DMA
				FirDRQ0 = (bTmp1 & 0x30) >> 4;
				pci_read_config_byte(pcidev,0x44,&bTmp1);
				FirDRQ1 = (bTmp1 & 0xc0) >> 6;
			} else  {
				pci_read_config_byte(pcidev,0x44,&bTmp1);    //DMA
				FirDRQ0 = (bTmp1 & 0x30) >> 4 ;
				FirDRQ1=0;
			}
			pci_read_config_byte(pcidev,0x47,&bTmp1);  //IRQ
			FirIRQ = bTmp1 & 0x0f;

			pci_read_config_byte(pcidev,0x69,&bTmp);
			FirIOBase = bTmp << 8;//hight byte
			pci_read_config_byte(pcidev,0x68,&bTmp);
			FirIOBase = (FirIOBase | bTmp ) & 0xfff0;
  //-------------------------
			info.fir_base=FirIOBase;
			info.irq=FirIRQ;
			info.dma=FirDRQ1;
			info.dma2=FirDRQ0;
			if (via_ircc_open(0, &info,0x3096) == 0)
				rc=0;
		} else
			rc = -ENODEV; //IR not turn on !!!!!
	}//Not VT1211

	IRDA_DEBUG(2, "%s(): End - rc = %d\n", __FUNCTION__, rc);
	return rc;
}

/*
 * Function via_ircc_clean ()
 *
 *    Close all configured chips
 *
 */
static void via_ircc_clean(void)
{
	int i;

	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);

	for (i=0; i < ARRAY_SIZE(dev_self); i++) {
		if (dev_self[i])
			via_ircc_close(dev_self[i]);
	}
}

static void __devexit via_remove_one (struct pci_dev *pdev)
{
	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);

	/* FIXME : This is ugly. We should use pci_get_drvdata(pdev);
	 * to get our driver instance and call directly via_ircc_close().
	 * See vlsi_ir for details...
	 * Jean II */
	via_ircc_clean();

	/* FIXME : This should be in via_ircc_close(), because here we may
	 * theoritically disable still configured devices :-( - Jean II */
	pci_disable_device(pdev);
}

static void __exit via_ircc_cleanup(void)
{
	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);

	/* FIXME : This should be redundant, as pci_unregister_driver()
	 * should call via_remove_one() on each device.
	 * Jean II */
	via_ircc_clean();

	/* Cleanup all instances of the driver */
	pci_unregister_driver (&via_driver); 
}

/*
 * Function via_ircc_open (iobase, irq)
 *
 *    Open driver instance
 *
 */
static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
{
	struct net_device *dev;
	struct via_ircc_cb *self;
	int err;

	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);

	if (i >= ARRAY_SIZE(dev_self))
		return -ENOMEM;

	/* Allocate new instance of the driver */
	dev = alloc_irdadev(sizeof(struct via_ircc_cb));
	if (dev == NULL) 
		return -ENOMEM;

	self = dev->priv;
	self->netdev = dev;
	spin_lock_init(&self->lock);

	/* FIXME : We should store our driver instance in the PCI layer,
	 * using pci_set_drvdata(), not in this array.
	 * See vlsi_ir for details... - Jean II */
	/* FIXME : 'i' is always 0 (see via_init_one()) :-( - Jean II */
	/* Need to store self somewhere */
	dev_self[i] = self;
	self->index = i;
	/* Initialize Resource */
	self->io.cfg_base = info->cfg_base;
	self->io.fir_base = info->fir_base;
	self->io.irq = info->irq;
	self->io.fir_ext = CHIP_IO_EXTENT;
	self->io.dma = info->dma;
	self->io.dma2 = info->dma2;
	self->io.fifo_size = 32;
	self->chip_id = id;
	self->st_fifo.len = 0;
	self->RxDataReady = 0;

	/* Reserve the ioports that we need */
	if (!request_region(self->io.fir_base, self->io.fir_ext, driver_name)) {
		IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
			   __FUNCTION__, self->io.fir_base);
		err = -ENODEV;
		goto err_out1;
	}
	
	/* Initialize QoS for this device */
	irda_init_max_qos_capabilies(&self->qos);

	/* Check if user has supplied the dongle id or not */
	if (!dongle_id)
		dongle_id = via_ircc_read_dongle_id(self->io.fir_base);
	self->io.dongle_id = dongle_id;

	/* The only value we must override it the baudrate */
	/* Maximum speeds and capabilities are dongle-dependant. */
	switch( self->io.dongle_id ){
	case 0x0d:
		self->qos.baud_rate.bits =
		    IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200 |
		    IR_576000 | IR_1152000 | (IR_4000000 << 8);
		break;
	default:
		self->qos.baud_rate.bits =
		    IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200;
		break;
	}

	/* Following was used for testing:
	 *
	 *   self->qos.baud_rate.bits = IR_9600;
	 *
	 * Is is no good, as it prohibits (error-prone) speed-changes.
	 */

	self->qos.min_turn_time.bits = qos_mtt_bits;
	irda_qos_bits_to_value(&self->qos);

	/* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
	self->rx_buff.truesize = 14384 + 2048;
	self->tx_buff.truesize = 14384 + 2048;

	/* Allocate memory if needed */
	self->rx_buff.head =
		dma_alloc_coherent(NULL, self->rx_buff.truesize,
				   &self->rx_buff_dma, GFP_KERNEL);
	if (self->rx_buff.head == NULL) {
		err = -ENOMEM;
		goto err_out2;
	}
	memset(self->rx_buff.head, 0, self->rx_buff.truesize);

	self->tx_buff.head =
		dma_alloc_coherent(NULL, self->tx_buff.truesize,
				   &self->tx_buff_dma, GFP_KERNEL);
	if (self->tx_buff.head == NULL) {
		err = -ENOMEM;
		goto err_out3;
	}
	memset(self->tx_buff.head, 0, self->tx_buff.truesize);

	self->rx_buff.in_frame = FALSE;
	self->rx_buff.state = OUTSIDE_FRAME;
	self->tx_buff.data = self->tx_buff.head;
	self->rx_buff.data = self->rx_buff.head;

	/* Reset Tx queue info */
	self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
	self->tx_fifo.tail = self->tx_buff.head;

	/* Keep track of module usage */
	SET_MODULE_OWNER(dev);

	/* Override the network functions we need to use */
	dev->hard_start_xmit = via_ircc_hard_xmit_sir;
	dev->open = via_ircc_net_open;
	dev->stop = via_ircc_net_close;
	dev->do_ioctl = via_ircc_net_ioctl;
	dev->get_stats = via_ircc_net_get_stats;

	err = register_netdev(dev);
	if (err)
		goto err_out4;

	IRDA_MESSAGE("IrDA: Registered device %s (via-ircc)\n", dev->name);

	/* Initialise the hardware..
	*/
	self->io.speed = 9600;
	via_hw_init(self);
	return 0;
 err_out4:
	dma_free_coherent(NULL, self->tx_buff.truesize,
			  self->tx_buff.head, self->tx_buff_dma);
 err_out3:
	dma_free_coherent(NULL, self->rx_buff.truesize,
			  self->rx_buff.head, self->rx_buff_dma);
 err_out2:
	release_region(self->io.fir_base, self->io.fir_ext);
 err_out1:
	free_netdev(dev);
	dev_self[i] = NULL;
	return err;
}

/*
 * Function via_ircc_close (self)
 *
 *    Close driver instance
 *
 */
static int via_ircc_close(struct via_ircc_cb *self)
{
	int iobase;

	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);

	IRDA_ASSERT(self != NULL, return -1;);

	iobase = self->io.fir_base;

	ResetChip(iobase, 5);	//hardware reset.
	/* Remove netdevice */
	unregister_netdev(self->netdev);

	/* Release the PORT that this driver is using */
	IRDA_DEBUG(2, "%s(), Releasing Region %03x\n",
		   __FUNCTION__, self->io.fir_base);
	release_region(self->io.fir_base, self->io.fir_ext);
	if (self->tx_buff.head)
		dma_free_coherent(NULL, self->tx_buff.truesize,
				  self->tx_buff.head, self->tx_buff_dma);
	if (self->rx_buff.head)
		dma_free_coherent(NULL, self->rx_buff.truesize,
				  self->rx_buff.head, self->rx_buff_dma);
	dev_self[self->index] = NULL;

	free_netdev(self->netdev);

	return 0;
}

/*
 * Function via_hw_init(self)
 *
 *    Returns non-negative on success.
 *
 * Formerly via_ircc_setup 
 */
static void via_hw_init(struct via_ircc_cb *self)
{
	int iobase = self->io.fir_base;

	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);

	SetMaxRxPacketSize(iobase, 0x0fff);	//set to max:4095
	// FIFO Init
	EnRXFIFOReadyInt(iobase, OFF);
	EnRXFIFOHalfLevelInt(iobase, OFF);
	EnTXFIFOHalfLevelInt(iobase, OFF);
	EnTXFIFOUnderrunEOMInt(iobase, ON);
	EnTXFIFOReadyInt(iobase, OFF);
	InvertTX(iobase, OFF);
	InvertRX(iobase, OFF);

	if (ReadLPCReg(0x20) == 0x3c)
		WriteLPCReg(0xF0, 0);	// for VT1211
	/* Int Init */
	EnRXSpecInt(iobase, ON);

	/* The following is basically hwreset */
	/* If this is the case, why not just call hwreset() ? Jean II */
	ResetChip(iobase, 5);
	EnableDMA(iobase, OFF);
	EnableTX(iobase, OFF);
	EnableRX(iobase, OFF);
	EnRXDMA(iobase, OFF);
	EnTXDMA(iobase, OFF);
	RXStart(iobase, OFF);
	TXStart(iobase, OFF);
	InitCard(iobase);
	CommonInit(iobase);
	SIRFilter(iobase, ON);
	SetSIR(iobase, ON);
	CRC16(iobase, ON);
	EnTXCRC(iobase, 0);
	WriteReg(iobase, I_ST_CT_0, 0x00);
	SetBaudRate(iobase, 9600);
	SetPulseWidth(iobase, 12);
	SetSendPreambleCount(iobase, 0);

	self->io.speed = 9600;
	self->st_fifo.len = 0;

	via_ircc_change_dongle_speed(iobase, self->io.speed,
				     self->io.dongle_id);

	WriteReg(iobase, I_ST_CT_0, 0x80);
}

/*
 * Function via_ircc_read_dongle_id (void)
 *
 */
static int via_ircc_read_dongle_id(int iobase)
{
	int dongle_id = 9;	/* Default to IBM */

	IRDA_ERROR("via-ircc: dongle probing not supported, please specify dongle_id module parameter.\n");
	return dongle_id;
}

/*
 * Function via_ircc_change_dongle_speed (iobase, speed, dongle_id)
 *    Change speed of the attach dongle
 *    only implement two type of dongle currently.
 */
static void via_ircc_change_dongle_speed(int iobase, int speed,
					 int dongle_id)
{
	u8 mode = 0;

	/* speed is unused, as we use IsSIROn()/IsMIROn() */
	speed = speed;

	IRDA_DEBUG(1, "%s(): change_dongle_speed to %d for 0x%x, %d\n",
		   __FUNCTION__, speed, iobase, dongle_id);

	switch (dongle_id) {

		/* Note: The dongle_id's listed here are derived from
		 * nsc-ircc.c */ 

	case 0x08:		/* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
		UseOneRX(iobase, ON);	// use one RX pin   RX1,RX2
		InvertTX(iobase, OFF);
		InvertRX(iobase, OFF);

		EnRX2(iobase, ON);	//sir to rx2
		EnGPIOtoRX2(iobase, OFF);

		if (IsSIROn(iobase)) {	//sir
			// Mode select Off
			SlowIRRXLowActive(iobase, ON);
			udelay(1000);
			SlowIRRXLowActive(iobase, OFF);
		} else {
			if (IsMIROn(iobase)) {	//mir
				// Mode select On
				SlowIRRXLowActive(iobase, OFF);
				udelay(20);
			} else {	// fir
				if (IsFIROn(iobase)) {	//fir
					// Mode select On
					SlowIRRXLowActive(iobase, OFF);
					udelay(20);
				}
			}
		}
		break;

	case 0x09:		/* IBM31T1100 or Temic TFDS6000/TFDS6500 */
		UseOneRX(iobase, ON);	//use ONE RX....RX1
		InvertTX(iobase, OFF);
		InvertRX(iobase, OFF);	// invert RX pin

		EnRX2(iobase, ON);
		EnGPIOtoRX2(iobase, OFF);
		if (IsSIROn(iobase)) {	//sir
			// Mode select On
			SlowIRRXLowActive(iobase, ON);
			udelay(20);
			// Mode select Off
			SlowIRRXLowActive(iobase, OFF);
		}
		if (IsMIROn(iobase)) {	//mir
			// Mode select On
			SlowIRRXLowActive(iobase, OFF);
			udelay(20);
			// Mode select Off
			SlowIRRXLowActive(iobase, ON);
		} else {	// fir
			if (IsFIROn(iobase)) {	//fir
				// Mode select On
				SlowIRRXLowActive(iobase, OFF);
				// TX On
				WriteTX(iobase, ON);
				udelay(20);
				// Mode select OFF
				SlowIRRXLowActive(iobase, ON);
				udelay(20);
				// TX Off
				WriteTX(iobase, OFF);
			}
		}
		break;

	case 0x0d:
		UseOneRX(iobase, OFF);	// use two RX pin   RX1,RX2
		InvertTX(iobase, OFF);
		InvertRX(iobase, OFF);
		SlowIRRXLowActive(iobase, OFF);
		if (IsSIROn(iobase)) {	//sir
			EnGPIOtoRX2(iobase, OFF);
			WriteGIO(iobase, OFF);
			EnRX2(iobase, OFF);	//sir to rx2
		} else {	// fir mir
			EnGPIOtoRX2(iobase, OFF);
			WriteGIO(iobase, OFF);
			EnRX2(iobase, OFF);	//fir to rx
		}
		break;

	case 0x11:		/* Temic TFDS4500 */

		IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __FUNCTION__);

		UseOneRX(iobase, ON);	//use ONE RX....RX1
		InvertTX(iobase, OFF);
		InvertRX(iobase, ON);	// invert RX pin
	
		EnRX2(iobase, ON);	//sir to rx2
		EnGPIOtoRX2(iobase, OFF);

		if( IsSIROn(iobase) ){	//sir

			// Mode select On
			SlowIRRXLowActive(iobase, ON);
			udelay(20);
			// Mode select Off
			SlowIRRXLowActive(iobase, OFF);

		} else{
			IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __FUNCTION__);
		}
		break;

	case 0x0ff:		/* Vishay */
		if (IsSIROn(iobase))
			mode = 0;
		else if (IsMIROn(iobase))
			mode = 1;
		else if (IsFIROn(iobase))
			mode = 2;
		else if (IsVFIROn(iobase))
			mode = 5;	//VFIR-16
		SI_SetMode(iobase, mode);
		break;

	default:
		IRDA_ERROR("%s: Error: dongle_id %d unsupported !\n",
			   __FUNCTION__, dongle_id);
	}
}

/*
 * Function via_ircc_change_speed (self, baud)
 *
 *    Change the speed of the device
 *
 */
static void via_ircc_change_speed(struct via_ircc_cb *self, __u32 speed)
{
	struct net_device *dev = self->netdev;
	u16 iobase;
	u8 value = 0, bTmp;

	iobase = self->io.fir_base;
	/* Update accounting for new speed */
	self->io.speed = speed;
	IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __FUNCTION__, speed);

	WriteReg(iobase, I_ST_CT_0, 0x0);

	/* Controller mode sellection */
	switch (speed) {
	case 2400:
	case 9600:
	case 19200:
	case 38400:
	case 57600:
	case 115200:
		value = (115200/speed)-1;
		SetSIR(iobase, ON);
		CRC16(iobase, ON);
		break;
	case 576000:
		/* FIXME: this can't be right, as it's the same as 115200,
		 * and 576000 is MIR, not SIR. */
		value = 0;
		SetSIR(iobase, ON);
		CRC16(iobase, ON);
		break;
	case 1152000:
		value = 0;
		SetMIR(iobase, ON);
		/* FIXME: CRC ??? */
		break;
	case 4000000:
		value = 0;
		SetFIR(iobase, ON);
		SetPulseWidth(iobase, 0);
		SetSendPreambleCount(iobase, 14);
		CRC16(iobase, OFF);
		EnTXCRC(iobase, ON);
		break;
	case 16000000:
		value = 0;
		SetVFIR(iobase, ON);
		/* FIXME: CRC ??? */
		break;
	default:
		value = 0;
		break;
	}

	/* Set baudrate to 0x19[2..7] */
	bTmp = (ReadReg(iobase, I_CF_H_1) & 0x03);
	bTmp |= value << 2;
	WriteReg(iobase, I_CF_H_1, bTmp);

	/* Some dongles may need to be informed about speed changes. */
	via_ircc_change_dongle_speed(iobase, speed, self->io.dongle_id);

	/* Set FIFO size to 64 */
	SetFIFO(iobase, 64);

	/* Enable IR */
	WriteReg(iobase, I_ST_CT_0, 0x80);

	// EnTXFIFOHalfLevelInt(iobase,ON);

	/* Enable some interrupts so we can receive frames */
	//EnAllInt(iobase,ON);

	if (IsSIROn(iobase)) {
		SIRFilter(iobase, ON);
		SIRRecvAny(iobase, ON);
	} else {
		SIRFilter(iobase, OFF);
		SIRRecvAny(iobase, OFF);
	}

	if (speed > 115200) {
		/* Install FIR xmit handler */
		dev->hard_start_xmit = via_ircc_hard_xmit_fir;
		via_ircc_dma_receive(self);
	} else {
		/* Install SIR xmit handler */
		dev->hard_start_xmit = via_ircc_hard_xmit_sir;
	}
	netif_wake_queue(dev);
}

/*
 * Function via_ircc_hard_xmit (skb, dev)
 *
 *    Transmit the frame!
 *
 */
static int via_ircc_hard_xmit_sir(struct sk_buff *skb,
				  struct net_device *dev)
{
	struct via_ircc_cb *self;
	unsigned long flags;
	u16 iobase;
	__u32 speed;

	self = (struct via_ircc_cb *) dev->priv;
	IRDA_ASSERT(self != NULL, return 0;);
	iobase = self->io.fir_base;

	netif_stop_queue(dev);
	/* Check if we need to change the speed */
	speed = irda_get_next_speed(skb);
	if ((speed != self->io.speed) && (speed != -1)) {
		/* Check for empty frame */
		if (!skb->len) {
			via_ircc_change_speed(self, speed);
			dev->trans_start = jiffies;
			dev_kfree_skb(skb);
			return 0;
		} else
			self->new_speed = speed;
	}
	InitCard(iobase);
	CommonInit(iobase);
	SIRFilter(iobase, ON);
	SetSIR(iobase, ON);
	CRC16(iobase, ON);
	EnTXCRC(iobase, 0);
	WriteReg(iobase, I_ST_CT_0, 0x00);

	spin_lock_irqsave(&self->lock, flags);
	self->tx_buff.data = self->tx_buff.head;
	self->tx_buff.len =
	    async_wrap_skb(skb, self->tx_buff.data,
			   self->tx_buff.truesize);

	self->stats.tx_bytes += self->tx_buff.len;
	/* Send this frame with old speed */
	SetBaudRate(iobase, self->io.speed);
	SetPulseWidth(iobase, 12);
	SetSendPreambleCount(iobase, 0);
	WriteReg(iobase, I_ST_CT_0, 0x80);

	EnableTX(iobase, ON);
	EnableRX(iobase, OFF);

	ResetChip(iobase, 0);
	ResetChip(iobase, 1);
	ResetChip(iobase, 2);
	ResetChip(iobase, 3);
	ResetChip(iobase, 4);

	EnAllInt(iobase, ON);
	EnTXDMA(iobase, ON);
	EnRXDMA(iobase, OFF);

	irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
		       DMA_TX_MODE);

	SetSendByte(iobase, self->tx_buff.len);
	RXStart(iobase, OFF);
	TXStart(iobase, ON);

	dev->trans_start = jiffies;
	spin_unlock_irqrestore(&self->lock, flags);
	dev_kfree_skb(skb);
	return 0;
}

static int via_ircc_hard_xmit_fir(struct sk_buff *skb,
				  struct net_device *dev)
{
	struct via_ircc_cb *self;
	u16 iobase;
	__u32 speed;
	unsigned long flags;

	self = (struct via_ircc_cb *) dev->priv;
	iobase = self->io.fir_base;

	if (self->st_fifo.len)
		return 0;
	if (self->chip_id == 0x3076)
		iodelay(1500);
	else
		udelay(1500);
	netif_stop_queue(dev);
	speed = irda_get_next_speed(skb);
	if ((speed != self->io.speed) && (speed != -1)) {
		if (!skb->len) {
			via_ircc_change_speed(self, speed);
			dev->trans_start = jiffies;
			dev_kfree_skb(skb);
			return 0;
		} else
			self->new_speed = speed;
	}
	spin_lock_irqsave(&self->lock, flags);
	self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
	self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;

	self->tx_fifo.tail += skb->len;
	self->stats.tx_bytes += skb->len;
	memcpy(self->tx_fifo.queue[self->tx_fifo.free].start, skb->data,
	       skb->len);
	self->tx_fifo.len++;
	self->tx_fifo.free++;
//F01   if (self->tx_fifo.len == 1) {
	via_ircc_dma_xmit(self, iobase);
//F01   }
//F01   if (self->tx_fifo.free < (MAX_TX_WINDOW -1 )) netif_wake_queue(self->netdev);
	dev->trans_start = jiffies;
	dev_kfree_skb(skb);
	spin_unlock_irqrestore(&self->lock, flags);
	return 0;

}

static int via_ircc_dma_xmit(struct via_ircc_cb *self, u16 iobase)
{
	EnTXDMA(iobase, OFF);
	self->io.direction = IO_XMIT;
	EnPhys(iobase, ON);
	EnableTX(iobase, ON);
	EnableRX(iobase, OFF);
	ResetChip(iobase, 0);
	ResetChip(iobase, 1);
	ResetChip(iobase, 2);
	ResetChip(iobase, 3);
	ResetChip(iobase, 4);
	EnAllInt(iobase, ON);
	EnTXDMA(iobase, ON);
	EnRXDMA(iobase, OFF);
	irda_setup_dma(self->io.dma,
		       ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
			self->tx_buff.head) + self->tx_buff_dma,
		       self->tx_fifo.queue[self->tx_fifo.ptr].len, DMA_TX_MODE);
	IRDA_DEBUG(1, "%s: tx_fifo.ptr=%x,len=%x,tx_fifo.len=%x..\n",
		   __FUNCTION__, self->tx_fifo.ptr,
		   self->tx_fifo.queue[self->tx_fifo.ptr].len,
		   self->tx_fifo.len);

	SetSendByte(iobase, self->tx_fifo.queue[self->tx_fifo.ptr].len);
	RXStart(iobase, OFF);
	TXStart(iobase, ON);
	return 0;

}

/*
 * Function via_ircc_dma_xmit_complete (self)
 *
 *    The transfer of a frame in finished. This function will only be called 
 *    by the interrupt handler
 *
 */
static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self)
{
	int iobase;
	int ret = TRUE;
	u8 Tx_status;

	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);

	iobase = self->io.fir_base;
	/* Disable DMA */
//      DisableDmaChannel(self->io.dma);
	/* Check for underrrun! */
	/* Clear bit, by writing 1 into it */
	Tx_status = GetTXStatus(iobase);
	if (Tx_status & 0x08) {
		self->stats.tx_errors++;
		self->stats.tx_fifo_errors++;
		hwreset(self);
// how to clear underrrun ?
	} else {
		self->stats.tx_packets++;
		ResetChip(iobase, 3);
		ResetChip(iobase, 4);
	}
	/* Check if we need to change the speed */
	if (self->new_speed) {
		via_ircc_change_speed(self, self->new_speed);
		self->new_speed = 0;
	}

	/* Finished with this frame, so prepare for next */
	if (IsFIROn(iobase)) {
		if (self->tx_fifo.len) {
			self->tx_fifo.len--;
			self->tx_fifo.ptr++;
		}
	}
	IRDA_DEBUG(1,
		   "%s: tx_fifo.len=%x ,tx_fifo.ptr=%x,tx_fifo.free=%x...\n",
		   __FUNCTION__,
		   self->tx_fifo.len, self->tx_fifo.ptr, self->tx_fifo.free);
/* F01_S
	// Any frames to be sent back-to-back? 
	if (self->tx_fifo.len) {
		// Not finished yet! 
	  	via_ircc_dma_xmit(self, iobase);
		ret = FALSE;
	} else { 
F01_E*/
	// Reset Tx FIFO info 
	self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
	self->tx_fifo.tail = self->tx_buff.head;
//F01   }

	// Make sure we have room for more frames 
//F01   if (self->tx_fifo.free < (MAX_TX_WINDOW -1 )) {
	// Not busy transmitting anymore 
	// Tell the network layer, that we can accept more frames 
	netif_wake_queue(self->netdev);
//F01   }
	return ret;
}

/*
 * Function via_ircc_dma_receive (self)
 *
 *    Set configuration for receive a frame.
 *
 */
static int via_ircc_dma_receive(struct via_ircc_cb *self)
{
	int iobase;

	iobase = self->io.fir_base;

	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);

	self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
	self->tx_fifo.tail = self->tx_buff.head;
	self->RxDataReady = 0;
	self->io.direction = IO_RECV;
	self->rx_buff.data = self->rx_buff.head;
	self->st_fifo.len = self->st_fifo.pending_bytes = 0;
	self->st_fifo.tail = self->st_fifo.head = 0;

	EnPhys(iobase, ON);
	EnableTX(iobase, OFF);
	EnableRX(iobase, ON);

	ResetChip(iobase, 0);
	ResetChip(iobase, 1);
	ResetChip(iobase, 2);
	ResetChip(iobase, 3);
	ResetChip(iobase, 4);

	EnAllInt(iobase, ON);
	EnTXDMA(iobase, OFF);
	EnRXDMA(iobase, ON);
	irda_setup_dma(self->io.dma2, self->rx_buff_dma,
		  self->rx_buff.truesize, DMA_RX_MODE);
	TXStart(iobase, OFF);
	RXStart(iobase, ON);

	return 0;
}

/*
 * Function via_ircc_dma_receive_complete (self)
 *
 *    Controller Finished with receiving frames,
 *    and this routine is call by ISR
 *    
 */
static int via_ircc_dma_receive_complete(struct via_ircc_cb *self,
					 int iobase)
{
	struct st_fifo *st_fifo;
	struct sk_buff *skb;
	int len, i;
	u8 status = 0;

	iobase = self->io.fir_base;
	st_fifo = &self->st_fifo;

	if (self->io.speed < 4000000) {	//Speed below FIR
		len = GetRecvByte(iobase, self);
		skb = dev_alloc_skb(len + 1);
		if (skb == NULL)
			return FALSE;
		// Make sure IP header gets aligned 
		skb_reserve(skb, 1);
		skb_put(skb, len - 2);
		if (self->chip_id == 0x3076) {
			for (i = 0; i < len - 2; i++)
				skb->data[i] = self->rx_buff.data[i * 2];
		} else {
			if (self->chip_id == 0x3096) {
				for (i = 0; i < len - 2; i++)
					skb->data[i] =
					    self->rx_buff.data[i];
			}
		}
		// Move to next frame 
		self->rx_buff.data += len;
		self->stats.rx_bytes += len;
		self->stats.rx_packets++;
		skb->dev = self->netdev;
		skb->mac.raw = skb->data;
		skb->protocol = htons(ETH_P_IRDA);
		netif_rx(skb);
		return TRUE;
	}

	else {			//FIR mode
		len = GetRecvByte(iobase, self);
		if (len == 0)
			return TRUE;	//interrupt only, data maybe move by RxT  
		if (((len - 4) < 2) || ((len - 4) > 2048)) {
			IRDA_DEBUG(1, "%s(): Trouble:len=%x,CurCount=%x,LastCount=%x..\n",
				   __FUNCTION__, len, RxCurCount(iobase, self),
				   self->RxLastCount);
			hwreset(self);
			return FALSE;
		}
		IRDA_DEBUG(2, "%s(): fifo.len=%x,len=%x,CurCount=%x..\n",
			   __FUNCTION__,
			   st_fifo->len, len - 4, RxCurCount(iobase, self));

		st_fifo->entries[st_fifo->tail].status = status;
		st_fifo->entries[st_fifo->tail].len = len;
		st_fifo->pending_bytes += len;
		st_fifo->tail++;
		st_fifo->len++;
		if (st_fifo->tail > MAX_RX_WINDOW)
			st_fifo->tail = 0;
		self->RxDataReady = 0;

		// It maybe have MAX_RX_WINDOW package receive by
		// receive_complete before Timer IRQ
/* F01_S
          if (st_fifo->len < (MAX_RX_WINDOW+2 )) { 
		  RXStart(iobase,ON);
	  	  SetTimer(iobase,4);
	  }
	  else	  { 
F01_E */
		EnableRX(iobase, OFF);
		EnRXDMA(iobase, OFF);
		RXStart(iobase, OFF);
//F01_S
		// Put this entry back in fifo 
		if (st_fifo->head > MAX_RX_WINDOW)
			st_fifo->head = 0;
		status = st_fifo->entries[st_fifo->head].status;
		len = st_fifo->entries[st_fifo->head].len;
		st_fifo->head++;
		st_fifo->len--;

		skb = dev_alloc_skb(len + 1 - 4);
		/*
		 * if frame size,data ptr,or skb ptr are wrong ,the get next
		 * entry.
		 */
		if ((skb == NULL) || (skb->data == NULL)
		    || (self->rx_buff.data == NULL) || (len < 6)) {
			self->stats.rx_dropped++;
			return TRUE;
		}
		skb_reserve(skb, 1);
		skb_put(skb, len - 4);

		memcpy(skb->data, self->rx_buff.data, len - 4);
		IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __FUNCTION__,
			   len - 4, self->rx_buff.data);

		// Move to next frame 
		self->rx_buff.data += len;
		self->stats.rx_bytes += len;
		self->stats.rx_packets++;
		skb->dev = self->netdev;
		skb->mac.raw = skb->data;
		skb->protocol = htons(ETH_P_IRDA);
		netif_rx(skb);

//F01_E
	}			//FIR
	return TRUE;

}

/*
 * if frame is received , but no INT ,then use this routine to upload frame.
 */
static int upload_rxdata(struct via_ircc_cb *self, int iobase)
{
	struct sk_buff *skb;
	int len;
	struct st_fifo *st_fifo;
	st_fifo = &self->st_fifo;

	len = GetRecvByte(iobase, self);

	IRDA_DEBUG(2, "%s(): len=%x\n", __FUNCTION__, len);

	if ((len - 4) < 2) {
		self->stats.rx_dropped++;
		return FALSE;
	}

	skb = dev_alloc_skb(len + 1);
	if (skb == NULL) {
		self->stats.rx_dropped++;
		return FALSE;
	}
	skb_reserve(skb, 1);
	skb_put(skb, len - 4 + 1);
	memcpy(skb->data, self->rx_buff.data, len - 4 + 1);
	st_fifo->tail++;
	st_fifo->len++;
	if (st_fifo->tail > MAX_RX_WINDOW)
		st_fifo->tail = 0;
	// Move to next frame 
	self->rx_buff.data += len;
	self->stats.rx_bytes += len;
	self->stats.rx_packets++;
	skb->dev = self->netdev;
	skb->mac.raw = skb->data;
	skb->protocol = htons(ETH_P_IRDA);
	netif_rx(skb);
	if (st_fifo->len < (MAX_RX_WINDOW + 2)) {
		RXStart(iobase, ON);
	} else {
		EnableRX(iobase, OFF);
		EnRXDMA(iobase, OFF);
		RXStart(iobase, OFF);
	}
	return TRUE;
}

/*
 * Implement back to back receive , use this routine to upload data.
 */

static int RxTimerHandler(struct via_ircc_cb *self, int iobase)
{
	struct st_fifo *st_fifo;
	struct sk_buff *skb;
	int len;
	u8 status;

	st_fifo = &self->st_fifo;

	if (CkRxRecv(iobase, self)) {
		// if still receiving ,then return ,don't upload frame 
		self->RetryCount = 0;
		SetTimer(iobase, 20);
		self->RxDataReady++;
		return FALSE;
	} else
		self->RetryCount++;

	if ((self->RetryCount >= 1) ||
	    ((st_fifo->pending_bytes + 2048) > self->rx_buff.truesize)
	    || (st_fifo->len >= (MAX_RX_WINDOW))) {
		while (st_fifo->len > 0) {	//upload frame
			// Put this entry back in fifo 
			if (st_fifo->head > MAX_RX_WINDOW)
				st_fifo->head = 0;
			status = st_fifo->entries[st_fifo->head].status;
			len = st_fifo->entries[st_fifo->head].len;
			st_fifo->head++;
			st_fifo->len--;

			skb = dev_alloc_skb(len + 1 - 4);
			/*
			 * if frame size, data ptr, or skb ptr are wrong,
			 * then get next entry.
			 */
			if ((skb == NULL) || (skb->data == NULL)
			    || (self->rx_buff.data == NULL) || (len < 6)) {
				self->stats.rx_dropped++;
				continue;
			}
			skb_reserve(skb, 1);
			skb_put(skb, len - 4);
			memcpy(skb->data, self->rx_buff.data, len - 4);

			IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __FUNCTION__,
				   len - 4, st_fifo->head);

			// Move to next frame 
			self->rx_buff.data += len;
			self->stats.rx_bytes += len;
			self->stats.rx_packets++;
			skb->dev = self->netdev;
			skb->mac.raw = skb->data;
			skb->protocol = htons(ETH_P_IRDA);
			netif_rx(skb);
		}		//while
		self->RetryCount = 0;

		IRDA_DEBUG(2,
			   "%s(): End of upload HostStatus=%x,RxStatus=%x\n",
			   __FUNCTION__,
			   GetHostStatus(iobase), GetRXStatus(iobase));

		/*
		 * if frame is receive complete at this routine ,then upload
		 * frame.
		 */
		if ((GetRXStatus(iobase) & 0x10)
		    && (RxCurCount(iobase, self) != self->RxLastCount)) {
			upload_rxdata(self, iobase);
			if (irda_device_txqueue_empty(self->netdev))
				via_ircc_dma_receive(self);
		}
	}			// timer detect complete
	else
		SetTimer(iobase, 4);
	return TRUE;

}



/*
 * Function via_ircc_interrupt (irq, dev_id)
 *
 *    An interrupt from the chip has arrived. Time to do some work
 *
 */
static irqreturn_t via_ircc_interrupt(int irq, void *dev_id)
{
	struct net_device *dev = (struct net_device *) dev_id;
	struct via_ircc_cb *self;
	int iobase;
	u8 iHostIntType, iRxIntType, iTxIntType;

	if (!dev) {
		IRDA_WARNING("%s: irq %d for unknown device.\n", driver_name,
			     irq);
		return IRQ_NONE;
	}
	self = (struct via_ircc_cb *) dev->priv;
	iobase = self->io.fir_base;
	spin_lock(&self->lock);
	iHostIntType = GetHostStatus(iobase);

	IRDA_DEBUG(4, "%s(): iHostIntType %02x:  %s %s %s  %02x\n",
		   __FUNCTION__, iHostIntType,
		   (iHostIntType & 0x40) ? "Timer" : "",
		   (iHostIntType & 0x20) ? "Tx" : "",
		   (iHostIntType & 0x10) ? "Rx" : "",
		   (iHostIntType & 0x0e) >> 1);

	if ((iHostIntType & 0x40) != 0) {	//Timer Event
		self->EventFlag.TimeOut++;
		ClearTimerInt(iobase, 1);
		if (self->io.direction == IO_XMIT) {
			via_ircc_dma_xmit(self, iobase);
		}
		if (self->io.direction == IO_RECV) {
			/*
			 * frame ready hold too long, must reset.
			 */
			if (self->RxDataReady > 30) {
				hwreset(self);
				if (irda_device_txqueue_empty(self->netdev)) {
					via_ircc_dma_receive(self);
				}
			} else {	// call this to upload frame.
				RxTimerHandler(self, iobase);
			}
		}		//RECV
	}			//Timer Event
	if ((iHostIntType & 0x20) != 0) {	//Tx Event
		iTxIntType = GetTXStatus(iobase);

		IRDA_DEBUG(4, "%s(): iTxIntType %02x:  %s %s %s %s\n",
			   __FUNCTION__, iTxIntType,
			   (iTxIntType & 0x08) ? "FIFO underr." : "",
			   (iTxIntType & 0x04) ? "EOM" : "",
			   (iTxIntType & 0x02) ? "FIFO ready" : "",
			   (iTxIntType & 0x01) ? "Early EOM" : "");

		if (iTxIntType & 0x4) {
			self->EventFlag.EOMessage++;	// read and will auto clean
			if (via_ircc_dma_xmit_complete(self)) {
				if (irda_device_txqueue_empty
				    (self->netdev)) {
					via_ircc_dma_receive(self);
				}
			} else {
				self->EventFlag.Unknown++;
			}
		}		//EOP
	}			//Tx Event
	//----------------------------------------
	if ((iHostIntType & 0x10) != 0) {	//Rx Event
		/* Check if DMA has finished */
		iRxIntType = GetRXStatus(iobase);

		IRDA_DEBUG(4, "%s(): iRxIntType %02x:  %s %s %s %s %s %s %s\n",
			   __FUNCTION__, iRxIntType,
			   (iRxIntType & 0x80) ? "PHY err."	: "",
			   (iRxIntType & 0x40) ? "CRC err"	: "",
			   (iRxIntType & 0x20) ? "FIFO overr."	: "",
			   (iRxIntType & 0x10) ? "EOF"		: "",
			   (iRxIntType & 0x08) ? "RxData"	: "",
			   (iRxIntType & 0x02) ? "RxMaxLen"	: "",
			   (iRxIntType & 0x01) ? "SIR bad"	: "");
		if (!iRxIntType)
			IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __FUNCTION__);

		if (iRxIntType & 0x10) {
			if (via_ircc_dma_receive_complete(self, iobase)) {
//F01       if(!(IsFIROn(iobase)))  via_ircc_dma_receive(self);
				via_ircc_dma_receive(self);
			}
		}		// No ERR     
		else {		//ERR
			IRDA_DEBUG(4, "%s(): RxIRQ ERR:iRxIntType=%x,HostIntType=%x,CurCount=%x,RxLastCount=%x_____\n",
				   __FUNCTION__, iRxIntType, iHostIntType,
				   RxCurCount(iobase, self),
				   self->RxLastCount);

			if (iRxIntType & 0x20) {	//FIFO OverRun ERR
				ResetChip(iobase, 0);
				ResetChip(iobase, 1);
			} else {	//PHY,CRC ERR

				if (iRxIntType != 0x08)
					hwreset(self);	//F01
			}
			via_ircc_dma_receive(self);
		}		//ERR

	}			//Rx Event
	spin_unlock(&self->lock);
	return IRQ_RETVAL(iHostIntType);
}

static void hwreset(struct via_ircc_cb *self)
{
	int iobase;
	iobase = self->io.fir_base;

	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);

	ResetChip(iobase, 5);
	EnableDMA(iobase, OFF);
	EnableTX(iobase, OFF);
	EnableRX(iobase, OFF);
	EnRXDMA(iobase, OFF);
	EnTXDMA(iobase, OFF);
	RXStart(iobase, OFF);
	TXStart(iobase, OFF);
	InitCard(iobase);
	CommonInit(iobase);
	SIRFilter(iobase, ON);
	SetSIR(iobase, ON);
	CRC16(iobase, ON);
	EnTXCRC(iobase, 0);
	WriteReg(iobase, I_ST_CT_0, 0x00);
	SetBaudRate(iobase, 9600);
	SetPulseWidth(iobase, 12);
	SetSendPreambleCount(iobase, 0);
	WriteReg(iobase, I_ST_CT_0, 0x80);

	/* Restore speed. */
	via_ircc_change_speed(self, self->io.speed);

	self->st_fifo.len = 0;
}

/*
 * Function via_ircc_is_receiving (self)
 *
 *    Return TRUE is we are currently receiving a frame
 *
 */
static int via_ircc_is_receiving(struct via_ircc_cb *self)
{
	int status = FALSE;
	int iobase;

	IRDA_ASSERT(self != NULL, return FALSE;);

	iobase = self->io.fir_base;
	if (CkRxRecv(iobase, self))
		status = TRUE;

	IRDA_DEBUG(2, "%s(): status=%x....\n", __FUNCTION__, status);

	return status;
}


/*
 * Function via_ircc_net_open (dev)
 *
 *    Start the device
 *
 */
static int via_ircc_net_open(struct net_device *dev)
{
	struct via_ircc_cb *self;
	int iobase;
	char hwname[32];

	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);

	IRDA_ASSERT(dev != NULL, return -1;);
	self = (struct via_ircc_cb *) dev->priv;
	self->stats.rx_packets = 0;
	IRDA_ASSERT(self != NULL, return 0;);
	iobase = self->io.fir_base;
	if (request_irq(self->io.irq, via_ircc_interrupt, 0, dev->name, dev)) {
		IRDA_WARNING("%s, unable to allocate irq=%d\n", driver_name,
			     self->io.irq);
		return -EAGAIN;
	}
	/*
	 * Always allocate the DMA channel after the IRQ, and clean up on 
	 * failure.
	 */
	if (request_dma(self->io.dma, dev->name)) {
		IRDA_WARNING("%s, unable to allocate dma=%d\n", driver_name,
			     self->io.dma);
		free_irq(self->io.irq, self);
		return -EAGAIN;
	}
	if (self->io.dma2 != self->io.dma) {
		if (request_dma(self->io.dma2, dev->name)) {
			IRDA_WARNING("%s, unable to allocate dma2=%d\n",
				     driver_name, self->io.dma2);
			free_irq(self->io.irq, self);
			return -EAGAIN;
		}
	}


	/* turn on interrupts */
	EnAllInt(iobase, ON);
	EnInternalLoop(iobase, OFF);
	EnExternalLoop(iobase, OFF);

	/* */
	via_ircc_dma_receive(self);

	/* Ready to play! */
	netif_start_queue(dev);

	/* 
	 * Open new IrLAP layer instance, now that everything should be
	 * initialized properly 
	 */
	sprintf(hwname, "VIA @ 0x%x", iobase);
	self->irlap = irlap_open(dev, &self->qos, hwname);

	self->RxLastCount = 0;

	return 0;
}

/*
 * Function via_ircc_net_close (dev)
 *
 *    Stop the device
 *
 */
static int via_ircc_net_close(struct net_device *dev)
{
	struct via_ircc_cb *self;
	int iobase;

	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);

	IRDA_ASSERT(dev != NULL, return -1;);
	self = (struct via_ircc_cb *) dev->priv;
	IRDA_ASSERT(self != NULL, return 0;);

	/* Stop device */
	netif_stop_queue(dev);
	/* Stop and remove instance of IrLAP */
	if (self->irlap)
		irlap_close(self->irlap);
	self->irlap = NULL;
	iobase = self->io.fir_base;
	EnTXDMA(iobase, OFF);
	EnRXDMA(iobase, OFF);
	DisableDmaChannel(self->io.dma);

	/* Disable interrupts */
	EnAllInt(iobase, OFF);
	free_irq(self->io.irq, dev);
	free_dma(self->io.dma);

	return 0;
}

/*
 * Function via_ircc_net_ioctl (dev, rq, cmd)
 *
 *    Process IOCTL commands for this device
 *
 */
static int via_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq,
			      int cmd)
{
	struct if_irda_req *irq = (struct if_irda_req *) rq;
	struct via_ircc_cb *self;
	unsigned long flags;
	int ret = 0;

	IRDA_ASSERT(dev != NULL, return -1;);
	self = dev->priv;
	IRDA_ASSERT(self != NULL, return -1;);
	IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name,
		   cmd);
	/* Disable interrupts & save flags */
	spin_lock_irqsave(&self->lock, flags);
	switch (cmd) {
	case SIOCSBANDWIDTH:	/* Set bandwidth */
		if (!capable(CAP_NET_ADMIN)) {
			ret = -EPERM;
			goto out;
		}
		via_ircc_change_speed(self, irq->ifr_baudrate);
		break;
	case SIOCSMEDIABUSY:	/* Set media busy */
		if (!capable(CAP_NET_ADMIN)) {
			ret = -EPERM;
			goto out;
		}
		irda_device_set_media_busy(self->netdev, TRUE);
		break;
	case SIOCGRECEIVING:	/* Check if we are receiving right now */
		irq->ifr_receiving = via_ircc_is_receiving(self);
		break;
	default:
		ret = -EOPNOTSUPP;
	}
      out:
	spin_unlock_irqrestore(&self->lock, flags);
	return ret;
}

static struct net_device_stats *via_ircc_net_get_stats(struct net_device
						       *dev)
{
	struct via_ircc_cb *self = (struct via_ircc_cb *) dev->priv;

	return &self->stats;
}

MODULE_AUTHOR("VIA Technologies,inc");
MODULE_DESCRIPTION("VIA IrDA Device Driver");
MODULE_LICENSE("GPL");

module_init(via_ircc_init);
module_exit(via_ircc_cleanup);