Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 | /*
* arch/sh/pci/ops-dreamcast.c
*
* PCI operations for the Sega Dreamcast
*
* Copyright (C) 2001, 2002 M. R. Brown
* Copyright (C) 2002, 2003 Paul Mundt
*
* This file originally bore the message (with enclosed-$):
* Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
* Dreamcast PCI: Supports SEGA Broadband Adaptor only.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/config.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
static struct resource gapspci_io_resource = {
.name = "GAPSPCI IO",
.start = GAPSPCI_BBA_CONFIG,
.end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
.flags = IORESOURCE_IO,
};
static struct resource gapspci_mem_resource = {
.name = "GAPSPCI mem",
.start = GAPSPCI_DMA_BASE,
.end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
.flags = IORESOURCE_MEM,
};
static struct pci_ops gapspci_pci_ops;
struct pci_channel board_pci_channels[] = {
{ &gapspci_pci_ops, &gapspci_io_resource,
&gapspci_mem_resource, 0, 1 },
{ 0, }
};
/*
* The !gapspci_config_access case really shouldn't happen, ever, unless
* someone implicitly messes around with the last devfn value.. otherwise we
* only support a single device anyways, and if we didn't have a BBA, we
* wouldn't make it terribly far through the PCI setup anyways.
*
* Also, we could very easily support both Type 0 and Type 1 configurations
* here, but since it doesn't seem that there is any such implementation in
* existance, we don't bother.
*
* I suppose if someone actually gets around to ripping the chip out of
* the BBA and hanging some more devices off of it, then this might be
* something to take into consideration. However, due to the cost of the BBA,
* and the general lack of activity by DC hardware hackers, this doesn't seem
* likely to happen anytime soon.
*/
static int gapspci_config_access(unsigned char bus, unsigned int devfn)
{
return (bus == 0) && (devfn == 0);
}
/*
* We can also actually read and write in b/w/l sizes! Thankfully this part
* was at least done right, and we don't have to do the stupid masking and
* shifting that we do on the 7751! Small wonders never cease to amaze.
*/
static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
{
*val = 0xffffffff;
if (!gapspci_config_access(bus->number, devfn))
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
}
return PCIBIOS_SUCCESSFUL;
}
static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
{
if (!gapspci_config_access(bus->number, devfn))
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
}
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops gapspci_pci_ops = {
.read = gapspci_read,
.write = gapspci_write,
};
/*
* gapspci init
*/
int __init gapspci_init(void)
{
char idbuf[16];
int i;
/*
* FIXME: All of this wants documenting to some degree,
* even some basic register definitions would be nice.
*
* I haven't seen anything this ugly since.. maple.
*/
for (i=0; i<16; i++)
idbuf[i] = inb(GAPSPCI_REGS+i);
if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
return -ENODEV;
outl(0x5a14a501, GAPSPCI_REGS+0x18);
for (i=0; i<1000000; i++)
;
if (inl(GAPSPCI_REGS+0x18) != 1)
return -EINVAL;
outl(0x01000000, GAPSPCI_REGS+0x20);
outl(0x01000000, GAPSPCI_REGS+0x24);
outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
outl(1, GAPSPCI_REGS+0x14);
outl(1, GAPSPCI_REGS+0x34);
/* Setting Broadband Adapter */
outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
return 0;
}
/* Haven't done anything here as yet */
char * __devinit pcibios_setup(char *str)
{
return str;
}
|