Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 | /*
* arch/ppc/syslib/m8260_setup.c
*
* Copyright (C) 1995 Linus Torvalds
* Adapted from 'alpha' version by Gary Thomas
* Modified by Cort Dougan (cort@cs.nmt.edu)
* Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
* Further modified for generic 8xx and 8260 by Dan.
*/
#include <linux/config.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/initrd.h>
#include <linux/root_dev.h>
#include <linux/seq_file.h>
#include <linux/irq.h>
#include <asm/mmu.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/mpc8260.h>
#include <asm/cpm2.h>
#include <asm/machdep.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
#include "cpm2_pic.h"
unsigned char __res[sizeof(bd_t)];
extern void pq2_find_bridges(void);
extern void pq2pci_init_irq(void);
extern void idma_pci9_init(void);
/* Place-holder for board-specific init */
void __attribute__ ((weak)) __init
m82xx_board_setup(void)
{
}
static void __init
m8260_setup_arch(void)
{
/* Print out Vendor and Machine info. */
printk(KERN_INFO "%s %s port\n", CPUINFO_VENDOR, CPUINFO_MACHINE);
/* Reset the Communication Processor Module. */
cpm2_reset();
#ifdef CONFIG_8260_PCI9
/* Initialise IDMA for PCI erratum workaround */
idma_pci9_init();
#endif
#ifdef CONFIG_PCI_8260
pq2_find_bridges();
#endif
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
#endif
identify_ppc_sys_by_name_and_id(BOARD_CHIP_NAME,
in_be32(CPM_MAP_ADDR + CPM_IMMR_OFFSET));
m82xx_board_setup();
}
/* The decrementer counts at the system (internal) clock frequency
* divided by four.
*/
static void __init
m8260_calibrate_decr(void)
{
bd_t *binfo = (bd_t *)__res;
int freq, divisor;
freq = binfo->bi_busfreq;
divisor = 4;
tb_ticks_per_jiffy = freq / HZ / divisor;
tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
}
/* The 8260 has an internal 1-second timer update register that
* we should use for this purpose.
*/
static uint rtc_time;
static int
m8260_set_rtc_time(unsigned long time)
{
rtc_time = time;
return(0);
}
static unsigned long
m8260_get_rtc_time(void)
{
/* Get time from the RTC.
*/
return((unsigned long)rtc_time);
}
#ifndef BOOTROM_RESTART_ADDR
#warning "Using default BOOTROM_RESTART_ADDR!"
#define BOOTROM_RESTART_ADDR 0xff000104
#endif
static void
m8260_restart(char *cmd)
{
extern void m8260_gorom(bd_t *bi, uint addr);
uint startaddr;
/* Most boot roms have a warmstart as the second instruction
* of the reset vector. If that doesn't work for you, change this
* or the reboot program to send a proper address.
*/
startaddr = BOOTROM_RESTART_ADDR;
if (cmd != NULL) {
if (!strncmp(cmd, "startaddr=", 10))
startaddr = simple_strtoul(&cmd[10], NULL, 0);
}
m8260_gorom((void*)__pa(__res), startaddr);
}
static void
m8260_halt(void)
{
local_irq_disable();
while (1);
}
static void
m8260_power_off(void)
{
m8260_halt();
}
static int
m8260_show_cpuinfo(struct seq_file *m)
{
bd_t *bp = (bd_t *)__res;
seq_printf(m, "vendor\t\t: %s\n"
"machine\t\t: %s\n"
"\n"
"mem size\t\t: 0x%08x\n"
"console baud\t\t: %d\n"
"\n"
"core clock\t: %u MHz\n"
"CPM clock\t: %u MHz\n"
"bus clock\t: %u MHz\n",
CPUINFO_VENDOR, CPUINFO_MACHINE, bp->bi_memsize,
bp->bi_baudrate, bp->bi_intfreq / 1000000,
bp->bi_cpmfreq / 1000000, bp->bi_busfreq / 1000000);
return 0;
}
/* Initialize the internal interrupt controller. The number of
* interrupts supported can vary with the processor type, and the
* 8260 family can have up to 64.
* External interrupts can be either edge or level triggered, and
* need to be initialized by the appropriate driver.
*/
static void __init
m8260_init_IRQ(void)
{
cpm2_init_IRQ();
/* Initialize the default interrupt mapping priorities,
* in case the boot rom changed something on us.
*/
cpm2_immr->im_intctl.ic_siprr = 0x05309770;
#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS))
/* Initialize stuff for the 82xx CPLD IC and install demux */
pq2pci_init_irq();
#endif
}
/*
* Same hack as 8xx
*/
static unsigned long __init
m8260_find_end_of_memory(void)
{
bd_t *binfo = (bd_t *)__res;
return binfo->bi_memsize;
}
/* Map the IMMR, plus anything else we can cover
* in that upper space according to the memory controller
* chip select mapping. Grab another bunch of space
* below that for stuff we can't cover in the upper.
*/
static void __init
m8260_map_io(void)
{
uint addr;
/* Map IMMR region to a 256MB BAT */
addr = (cpm2_immr != NULL) ? (uint)cpm2_immr : CPM_MAP_ADDR;
io_block_mapping(addr, addr, 0x10000000, _PAGE_IO);
/* Map I/O region to a 256MB BAT */
io_block_mapping(IO_VIRT_ADDR, IO_PHYS_ADDR, 0x10000000, _PAGE_IO);
}
/* Place-holder for board-specific ppc_md hooking */
void __attribute__ ((weak)) __init
m82xx_board_init(void)
{
}
/* Inputs:
* r3 - Optional pointer to a board information structure.
* r4 - Optional pointer to the physical starting address of the init RAM
* disk.
* r5 - Optional pointer to the physical ending address of the init RAM
* disk.
* r6 - Optional pointer to the physical starting address of any kernel
* command-line parameters.
* r7 - Optional pointer to the physical ending address of any kernel
* command-line parameters.
*/
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
parse_bootinfo(find_bootinfo());
if ( r3 )
memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
#ifdef CONFIG_BLK_DEV_INITRD
/* take care of initrd if we have one */
if ( r4 ) {
initrd_start = r4 + KERNELBASE;
initrd_end = r5 + KERNELBASE;
}
#endif /* CONFIG_BLK_DEV_INITRD */
/* take care of cmd line */
if ( r6 ) {
*(char *)(r7+KERNELBASE) = 0;
strcpy(cmd_line, (char *)(r6+KERNELBASE));
}
ppc_md.setup_arch = m8260_setup_arch;
ppc_md.show_cpuinfo = m8260_show_cpuinfo;
ppc_md.init_IRQ = m8260_init_IRQ;
ppc_md.get_irq = cpm2_get_irq;
ppc_md.restart = m8260_restart;
ppc_md.power_off = m8260_power_off;
ppc_md.halt = m8260_halt;
ppc_md.set_rtc_time = m8260_set_rtc_time;
ppc_md.get_rtc_time = m8260_get_rtc_time;
ppc_md.calibrate_decr = m8260_calibrate_decr;
ppc_md.find_end_of_memory = m8260_find_end_of_memory;
ppc_md.setup_io_mappings = m8260_map_io;
/* Call back for board-specific settings and overrides. */
m82xx_board_init();
}
|