Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 | /*
* Device driver for the via ADB on (many) Mac II-class machines
*
* Based on the original ADB keyboard handler Copyright (c) 1997 Alan Cox
* Also derived from code Copyright (C) 1996 Paul Mackerras.
*
* With various updates provided over the years by Michael Schmitz,
* Guideo Koerber and others.
*
* Rewrite for Unified ADB by Joshua M. Thompson (funaho@jurai.org)
*
* 1999-08-02 (jmt) - Initial rewrite for Unified ADB.
* 2000-03-29 Tony Mantler <tonym@mac.linux-m68k.org>
* - Big overhaul, should actually work now.
*/
#include <stdarg.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/adb.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/machw.h>
#include <asm/mac_via.h>
#include <asm/io.h>
#include <asm/system.h>
static volatile unsigned char *via;
/* VIA registers - spaced 0x200 bytes apart */
#define RS 0x200 /* skip between registers */
#define B 0 /* B-side data */
#define A RS /* A-side data */
#define DIRB (2*RS) /* B-side direction (1=output) */
#define DIRA (3*RS) /* A-side direction (1=output) */
#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
#define T2CL (8*RS) /* Timer 2 ctr/latch (low 8 bits) */
#define T2CH (9*RS) /* Timer 2 counter (high 8 bits) */
#define SR (10*RS) /* Shift register */
#define ACR (11*RS) /* Auxiliary control register */
#define PCR (12*RS) /* Peripheral control register */
#define IFR (13*RS) /* Interrupt flag register */
#define IER (14*RS) /* Interrupt enable register */
#define ANH (15*RS) /* A-side data, no handshake */
/* Bits in B data register: all active low */
#define TREQ 0x08 /* Transfer request (input) */
#define TACK 0x10 /* Transfer acknowledge (output) */
#define TIP 0x20 /* Transfer in progress (output) */
#define ST_MASK 0x30 /* mask for selecting ADB state bits */
/* Bits in ACR */
#define SR_CTRL 0x1c /* Shift register control bits */
#define SR_EXT 0x0c /* Shift on external clock */
#define SR_OUT 0x10 /* Shift out if 1 */
/* Bits in IFR and IER */
#define IER_SET 0x80 /* set bits in IER */
#define IER_CLR 0 /* clear bits in IER */
#define SR_INT 0x04 /* Shift register full/empty */
#define SR_DATA 0x08 /* Shift register data */
#define SR_CLOCK 0x10 /* Shift register clock */
/* ADB transaction states according to GMHW */
#define ST_CMD 0x00 /* ADB state: command byte */
#define ST_EVEN 0x10 /* ADB state: even data byte */
#define ST_ODD 0x20 /* ADB state: odd data byte */
#define ST_IDLE 0x30 /* ADB state: idle, nothing to send */
static int macii_init_via(void);
static void macii_start(void);
static irqreturn_t macii_interrupt(int irq, void *arg, struct pt_regs *regs);
static void macii_retransmit(int);
static void macii_queue_poll(void);
static int macii_probe(void);
static int macii_init(void);
static int macii_send_request(struct adb_request *req, int sync);
static int macii_write(struct adb_request *req);
static int macii_autopoll(int devs);
static void macii_poll(void);
static int macii_reset_bus(void);
struct adb_driver via_macii_driver = {
"Mac II",
macii_probe,
macii_init,
macii_send_request,
macii_autopoll,
macii_poll,
macii_reset_bus
};
static enum macii_state {
idle,
sending,
reading,
read_done,
awaiting_reply
} macii_state;
static int need_poll = 0;
static int command_byte = 0;
static int last_reply = 0;
static int last_active = 0;
static struct adb_request *current_req;
static struct adb_request *last_req;
static struct adb_request *retry_req;
static unsigned char reply_buf[16];
static unsigned char *reply_ptr;
static int reply_len;
static int reading_reply;
static int data_index;
static int first_byte;
static int prefix_len;
static int status = ST_IDLE|TREQ;
static int last_status;
static int driver_running = 0;
/* debug level 10 required for ADB logging (should be && debug_adb, ideally) */
/* Check for MacII style ADB */
static int macii_probe(void)
{
if (macintosh_config->adb_type != MAC_ADB_II) return -ENODEV;
via = via1;
printk("adb: Mac II ADB Driver v1.0 for Unified ADB\n");
return 0;
}
/* Initialize the driver */
int macii_init(void)
{
unsigned long flags;
int err;
local_irq_save(flags);
err = macii_init_via();
if (err) return err;
err = request_irq(IRQ_MAC_ADB, macii_interrupt, IRQ_FLG_LOCK, "ADB",
macii_interrupt);
if (err) return err;
macii_state = idle;
local_irq_restore(flags);
return 0;
}
/* initialize the hardware */
static int macii_init_via(void)
{
unsigned char x;
/* Set the lines up. We want TREQ as input TACK|TIP as output */
via[DIRB] = (via[DIRB] | TACK | TIP) & ~TREQ;
/* Set up state: idle */
via[B] |= ST_IDLE;
last_status = via[B] & (ST_MASK|TREQ);
/* Shift register on input */
via[ACR] = (via[ACR] & ~SR_CTRL) | SR_EXT;
/* Wipe any pending data and int */
x = via[SR];
return 0;
}
/* Send an ADB poll (Talk Register 0 command, tagged on the front of the request queue) */
static void macii_queue_poll(void)
{
static int device = 0;
static int in_poll=0;
static struct adb_request req;
unsigned long flags;
if (in_poll) printk("macii_queue_poll: double poll!\n");
in_poll++;
if (++device > 15) device = 1;
adb_request(&req, NULL, ADBREQ_REPLY|ADBREQ_NOSEND, 1,
ADB_READREG(device, 0));
local_irq_save(flags);
req.next = current_req;
current_req = &req;
local_irq_restore(flags);
macii_start();
in_poll--;
}
/* Send an ADB retransmit (Talk, appended to the request queue) */
static void macii_retransmit(int device)
{
static int in_retransmit = 0;
static struct adb_request rt;
unsigned long flags;
if (in_retransmit) printk("macii_retransmit: double retransmit!\n");
in_retransmit++;
adb_request(&rt, NULL, ADBREQ_REPLY|ADBREQ_NOSEND, 1,
ADB_READREG(device, 0));
local_irq_save(flags);
if (current_req != NULL) {
last_req->next = &rt;
last_req = &rt;
} else {
current_req = &rt;
last_req = &rt;
}
if (macii_state == idle) macii_start();
local_irq_restore(flags);
in_retransmit--;
}
/* Send an ADB request; if sync, poll out the reply 'till it's done */
static int macii_send_request(struct adb_request *req, int sync)
{
int i;
i = macii_write(req);
if (i) return i;
if (sync) {
while (!req->complete) macii_poll();
}
return 0;
}
/* Send an ADB request */
static int macii_write(struct adb_request *req)
{
unsigned long flags;
if (req->nbytes < 2 || req->data[0] != ADB_PACKET || req->nbytes > 15) {
req->complete = 1;
return -EINVAL;
}
req->next = NULL;
req->sent = 0;
req->complete = 0;
req->reply_len = 0;
local_irq_save(flags);
if (current_req != NULL) {
last_req->next = req;
last_req = req;
} else {
current_req = req;
last_req = req;
if (macii_state == idle) macii_start();
}
local_irq_restore(flags);
return 0;
}
/* Start auto-polling */
static int macii_autopoll(int devs)
{
/* Just ping a random default address */
if (!(current_req || retry_req))
macii_retransmit( (last_active < 16 && last_active > 0) ? last_active : 3);
return 0;
}
/* Prod the chip without interrupts */
static void macii_poll(void)
{
unsigned long flags;
local_irq_save(flags);
if (via[IFR] & SR_INT) macii_interrupt(0, NULL, NULL);
local_irq_restore(flags);
}
/* Reset the bus */
static int macii_reset_bus(void)
{
static struct adb_request req;
/* Command = 0, Address = ignored */
adb_request(&req, NULL, 0, 1, ADB_BUSRESET);
return 0;
}
/* Start sending ADB packet */
static void macii_start(void)
{
unsigned long flags;
struct adb_request *req;
req = current_req;
if (!req) return;
/* assert macii_state == idle */
if (macii_state != idle) {
printk("macii_start: called while driver busy (%p %x %x)!\n",
req, macii_state, (uint) via1[B] & (ST_MASK|TREQ));
return;
}
local_irq_save(flags);
/*
* IRQ signaled ?? (means ADB controller wants to send, or might
* be end of packet if we were reading)
*/
#if 0 /* FIXME: This is broke broke broke, for some reason */
if ((via[B] & TREQ) == 0) {
printk("macii_start: weird poll stuff. huh?\n");
/*
* FIXME - we need to restart this on a timer
* or a collision at boot hangs us.
* Never set macii_state to idle here, or macii_start
* won't be called again from send_request!
* (need to re-check other cases ...)
*/
/*
* if the interrupt handler set the need_poll
* flag, it's hopefully a SRQ poll or re-Talk
* so we try to send here anyway
*/
if (!need_poll) {
if (console_loglevel == 10)
printk("macii_start: device busy - retry %p state %d status %x!\n",
req, macii_state,
(uint) via[B] & (ST_MASK|TREQ));
retry_req = req;
/* set ADB status here ? */
local_irq_restore(flags);
return;
} else {
need_poll = 0;
}
}
#endif
/*
* Another retry pending? (sanity check)
*/
if (retry_req) {
retry_req = NULL;
}
/* Now send it. Be careful though, that first byte of the request */
/* is actually ADB_PACKET; the real data begins at index 1! */
/* store command byte */
command_byte = req->data[1];
/* Output mode */
via[ACR] |= SR_OUT;
/* Load data */
via[SR] = req->data[1];
/* set ADB state to 'command' */
via[B] = (via[B] & ~ST_MASK) | ST_CMD;
macii_state = sending;
data_index = 2;
local_irq_restore(flags);
}
/*
* The notorious ADB interrupt handler - does all of the protocol handling,
* except for starting new send operations. Relies heavily on the ADB
* controller sending and receiving data, thereby generating SR interrupts
* for us. This means there has to be always activity on the ADB bus, otherwise
* the whole process dies and has to be re-kicked by sending TALK requests ...
* CUDA-based Macs seem to solve this with the autopoll option, for MacII-type
* ADB the problem isn't solved yet (retransmit of the latest active TALK seems
* a good choice; either on timeout or on a timer interrupt).
*
* The basic ADB state machine was left unchanged from the original MacII code
* by Alan Cox, which was based on the CUDA driver for PowerMac.
* The syntax of the ADB status lines seems to be totally different on MacII,
* though. MacII uses the states Command -> Even -> Odd -> Even ->...-> Idle for
* sending, and Idle -> Even -> Odd -> Even ->...-> Idle for receiving. Start
* and end of a receive packet are signaled by asserting /IRQ on the interrupt
* line. Timeouts are signaled by a sequence of 4 0xFF, with /IRQ asserted on
* every other byte. SRQ is probably signaled by 3 or more 0xFF tacked on the
* end of a packet. (Thanks to Guido Koerber for eavesdropping on the ADB
* protocol with a logic analyzer!!)
*
* Note: As of 21/10/97, the MacII ADB part works including timeout detection
* and retransmit (Talk to the last active device).
*/
static irqreturn_t macii_interrupt(int irq, void *arg, struct pt_regs *regs)
{
int x, adbdir;
unsigned long flags;
struct adb_request *req;
last_status = status;
/* prevent races due to SCSI enabling ints */
local_irq_save(flags);
if (driver_running) {
local_irq_restore(flags);
return IRQ_NONE;
}
driver_running = 1;
status = via[B] & (ST_MASK|TREQ);
adbdir = via[ACR] & SR_OUT;
switch (macii_state) {
case idle:
x = via[SR];
first_byte = x;
/* set ADB state = even for first data byte */
via[B] = (via[B] & ~ST_MASK) | ST_EVEN;
reply_buf[0] = first_byte; /* was command_byte?? */
reply_ptr = reply_buf + 1;
reply_len = 1;
prefix_len = 1;
reading_reply = 0;
macii_state = reading;
break;
case awaiting_reply:
/* handshake etc. for II ?? */
x = via[SR];
first_byte = x;
/* set ADB state = even for first data byte */
via[B] = (via[B] & ~ST_MASK) | ST_EVEN;
current_req->reply[0] = first_byte;
reply_ptr = current_req->reply + 1;
reply_len = 1;
prefix_len = 1;
reading_reply = 1;
macii_state = reading;
break;
case sending:
req = current_req;
if (data_index >= req->nbytes) {
/* print an error message if a listen command has no data */
if (((command_byte & 0x0C) == 0x08)
/* && (console_loglevel == 10) */
&& (data_index == 2))
printk("MacII ADB: listen command with no data: %x!\n",
command_byte);
/* reset to shift in */
via[ACR] &= ~SR_OUT;
x = via[SR];
/* set ADB state idle - might get SRQ */
via[B] = (via[B] & ~ST_MASK) | ST_IDLE;
req->sent = 1;
if (req->reply_expected) {
macii_state = awaiting_reply;
} else {
req->complete = 1;
current_req = req->next;
if (req->done) (*req->done)(req);
macii_state = idle;
if (current_req || retry_req)
macii_start();
else
macii_retransmit((command_byte & 0xF0) >> 4);
}
} else {
via[SR] = req->data[data_index++];
if ( (via[B] & ST_MASK) == ST_CMD ) {
/* just sent the command byte, set to EVEN */
via[B] = (via[B] & ~ST_MASK) | ST_EVEN;
} else {
/* invert state bits, toggle ODD/EVEN */
via[B] ^= ST_MASK;
}
}
break;
case reading:
/* timeout / SRQ handling for II hw */
if( (first_byte == 0xFF && (reply_len-prefix_len)==2
&& memcmp(reply_ptr-2,"\xFF\xFF",2)==0) ||
((reply_len-prefix_len)==3
&& memcmp(reply_ptr-3,"\xFF\xFF\xFF",3)==0))
{
/*
* possible timeout (in fact, most probably a
* timeout, since SRQ can't be signaled without
* transfer on the bus).
* The last three bytes seen were FF, together
* with the starting byte (in case we started
* on 'idle' or 'awaiting_reply') this probably
* makes four. So this is mostl likely #5!
* The timeout signal is a pattern 1 0 1 0 0..
* on /INT, meaning we missed it :-(
*/
x = via[SR];
if (x != 0xFF) printk("MacII ADB: mistaken timeout/SRQ!\n");
if ((status & TREQ) == (last_status & TREQ)) {
/* Not a timeout. Unsolicited SRQ? weird. */
/* Terminate the SRQ packet and poll */
need_poll = 1;
}
/* There's no packet to get, so reply is blank */
via[B] ^= ST_MASK;
reply_ptr -= (reply_len-prefix_len);
reply_len = prefix_len;
macii_state = read_done;
break;
} /* end timeout / SRQ handling for II hw. */
if((reply_len-prefix_len)>3
&& memcmp(reply_ptr-3,"\xFF\xFF\xFF",3)==0)
{
/* SRQ tacked on data packet */
/* Terminate the packet (SRQ never ends) */
x = via[SR];
macii_state = read_done;
reply_len -= 3;
reply_ptr -= 3;
need_poll = 1;
/* need to continue; next byte not seen else */
} else {
/* Sanity check */
if (reply_len > 15) reply_len = 0;
/* read byte */
x = via[SR];
*reply_ptr = x;
reply_ptr++;
reply_len++;
}
/* The usual handshake ... */
/*
* NetBSD hints that the next to last byte
* is sent with IRQ !!
* Guido found out it's the last one (0x0),
* but IRQ should be asserted already.
* Problem with timeout detection: First
* transition to /IRQ might be second
* byte of timeout packet!
* Timeouts are signaled by 4x FF.
*/
if (((status & TREQ) == 0) && (x == 0x00)) { /* != 0xFF */
/* invert state bits, toggle ODD/EVEN */
via[B] ^= ST_MASK;
/* adjust packet length */
reply_len--;
reply_ptr--;
macii_state = read_done;
} else {
/* not caught: ST_CMD */
/* required for re-entry 'reading'! */
if ((status & ST_MASK) == ST_IDLE) {
/* (in)sanity check - set even */
via[B] = (via[B] & ~ST_MASK) | ST_EVEN;
} else {
/* invert state bits */
via[B] ^= ST_MASK;
}
}
break;
case read_done:
x = via[SR];
if (reading_reply) {
req = current_req;
req->reply_len = reply_ptr - req->reply;
req->complete = 1;
current_req = req->next;
if (req->done) (*req->done)(req);
} else {
adb_input(reply_buf, reply_ptr - reply_buf,
regs, 0);
}
/*
* remember this device ID; it's the latest we got a
* reply from!
*/
last_reply = command_byte;
last_active = (command_byte & 0xF0) >> 4;
/* SRQ seen before, initiate poll now */
if (need_poll) {
macii_state = idle;
macii_queue_poll();
need_poll = 0;
break;
}
/* set ADB state to idle */
via[B] = (via[B] & ~ST_MASK) | ST_IDLE;
/* /IRQ seen, so the ADB controller has data for us */
if ((via[B] & TREQ) != 0) {
macii_state = reading;
reply_buf[0] = command_byte;
reply_ptr = reply_buf + 1;
reply_len = 1;
prefix_len = 1;
reading_reply = 0;
} else {
/* no IRQ, send next packet or wait */
macii_state = idle;
if (current_req)
macii_start();
else
macii_retransmit(last_active);
}
break;
default:
break;
}
/* reset mutex and interrupts */
driver_running = 0;
local_irq_restore(flags);
return IRQ_HANDLED;
}
|