Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 | /*
* Standard Hot Plug Controller Driver
*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
* Copyright (C) 2003-2004 Intel Corporation
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/smp_lock.h>
#include <linux/pci.h>
#include "../pci.h"
#include "shpchp.h"
static void interrupt_event_handler(struct controller *ctrl);
static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */
static struct semaphore event_exit; /* guard ensure thread has exited before calling it quits */
static int event_finished;
static unsigned long pushbutton_pending; /* = 0 */
u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id)
{
struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 rc = 0;
u8 getstatus;
struct event_info *taskInfo;
/* Attention Button Change */
dbg("shpchp: Attention button interrupt received.\n");
/* This is the structure that tells the worker thread what to do */
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
ctrl->next_event = (ctrl->next_event + 1) % 10;
taskInfo->hp_slot = hp_slot;
rc++;
/*
* Button pressed - See if need to TAKE ACTION!!!
*/
info("Button pressed on Slot(%d)\n", ctrl->first_slot + hp_slot);
taskInfo->event_type = INT_BUTTON_PRESS;
if ((p_slot->state == BLINKINGON_STATE)
|| (p_slot->state == BLINKINGOFF_STATE)) {
/* Cancel if we are still blinking; this means that we press the
* attention again before the 5 sec. limit expires to cancel hot-add
* or hot-remove
*/
taskInfo->event_type = INT_BUTTON_CANCEL;
info("Button cancel on Slot(%d)\n", ctrl->first_slot + hp_slot);
} else if ((p_slot->state == POWERON_STATE)
|| (p_slot->state == POWEROFF_STATE)) {
/* Ignore if the slot is on power-on or power-off state; this
* means that the previous attention button action to hot-add or
* hot-remove is undergoing
*/
taskInfo->event_type = INT_BUTTON_IGNORE;
info("Button ignore on Slot(%d)\n", ctrl->first_slot + hp_slot);
}
if (rc)
up(&event_semaphore); /* signal event thread that new event is posted */
return 0;
}
u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
{
struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 rc = 0;
u8 getstatus;
struct event_info *taskInfo;
/* Switch Change */
dbg("shpchp: Switch interrupt received.\n");
/* This is the structure that tells the worker thread
* what to do
*/
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
ctrl->next_event = (ctrl->next_event + 1) % 10;
taskInfo->hp_slot = hp_slot;
rc++;
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
dbg("%s: Card present %x Power status %x\n", __FUNCTION__,
p_slot->presence_save, p_slot->pwr_save);
if (getstatus) {
/*
* Switch opened
*/
info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot);
taskInfo->event_type = INT_SWITCH_OPEN;
if (p_slot->pwr_save && p_slot->presence_save) {
taskInfo->event_type = INT_POWER_FAULT;
err("Surprise Removal of card\n");
}
} else {
/*
* Switch closed
*/
info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot);
taskInfo->event_type = INT_SWITCH_CLOSE;
}
if (rc)
up(&event_semaphore); /* signal event thread that new event is posted */
return rc;
}
u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id)
{
struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 rc = 0;
/*u8 temp_byte;*/
struct event_info *taskInfo;
/* Presence Change */
dbg("shpchp: Presence/Notify input change.\n");
/* This is the structure that tells the worker thread
* what to do
*/
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
ctrl->next_event = (ctrl->next_event + 1) % 10;
taskInfo->hp_slot = hp_slot;
rc++;
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
/*
* Save the presence state
*/
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
if (p_slot->presence_save) {
/*
* Card Present
*/
info("Card present on Slot(%d)\n", ctrl->first_slot + hp_slot);
taskInfo->event_type = INT_PRESENCE_ON;
} else {
/*
* Not Present
*/
info("Card not present on Slot(%d)\n", ctrl->first_slot + hp_slot);
taskInfo->event_type = INT_PRESENCE_OFF;
}
if (rc)
up(&event_semaphore); /* signal event thread that new event is posted */
return rc;
}
u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id)
{
struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 rc = 0;
struct event_info *taskInfo;
/* Power fault */
dbg("shpchp: Power fault interrupt received.\n");
/* This is the structure that tells the worker thread
* what to do
*/
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
ctrl->next_event = (ctrl->next_event + 1) % 10;
taskInfo->hp_slot = hp_slot;
rc++;
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
/*
* Power fault Cleared
*/
info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot);
p_slot->status = 0x00;
taskInfo->event_type = INT_POWER_FAULT_CLEAR;
} else {
/*
* Power fault
*/
info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot);
taskInfo->event_type = INT_POWER_FAULT;
/* set power fault status for this board */
p_slot->status = 0xFF;
info("power fault bit %x set\n", hp_slot);
}
if (rc)
up(&event_semaphore); /* signal event thread that new event is posted */
return rc;
}
/* The following routines constitute the bulk of the
hotplug controller logic
*/
static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
enum pci_bus_speed speed)
{
int rc = 0;
dbg("%s: change to speed %d\n", __FUNCTION__, speed);
down(&ctrl->crit_sect);
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) {
err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
up(&ctrl->crit_sect);
return WRONG_BUS_FREQUENCY;
}
wait_for_ctrl_irq (ctrl);
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n",
__FUNCTION__);
err("%s: Error code (%d)\n", __FUNCTION__, rc);
up(&ctrl->crit_sect);
return WRONG_BUS_FREQUENCY;
}
up(&ctrl->crit_sect);
return rc;
}
static int fix_bus_speed(struct controller *ctrl, struct slot *pslot,
u8 flag, enum pci_bus_speed asp, enum pci_bus_speed bsp,
enum pci_bus_speed msp)
{
int rc = 0;
if (flag != 0) { /* Other slots on the same bus are occupied */
if ( asp < bsp ) {
err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bsp, asp);
return WRONG_BUS_FREQUENCY;
}
} else {
/* Other slots on the same bus are empty */
if (msp == bsp) {
/* if adapter_speed >= bus_speed, do nothing */
if (asp < bsp) {
/*
* Try to lower bus speed to accommodate the adapter if other slots
* on the same controller are empty
*/
if ((rc = change_bus_speed(ctrl, pslot, asp)))
return rc;
}
} else {
if (asp < msp) {
if ((rc = change_bus_speed(ctrl, pslot, asp)))
return rc;
} else {
if ((rc = change_bus_speed(ctrl, pslot, msp)))
return rc;
}
}
}
return rc;
}
/**
* board_added - Called after a board has been added to the system.
*
* Turns power on for the board
* Configures board
*
*/
static int board_added(struct slot *p_slot)
{
u8 hp_slot;
u8 slots_not_empty = 0;
int rc = 0;
enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed;
u8 pi, mode;
struct controller *ctrl = p_slot->ctrl;
hp_slot = p_slot->device - ctrl->slot_device_offset;
dbg("%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n",
__FUNCTION__, p_slot->device,
ctrl->slot_device_offset, hp_slot);
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
/* Power on slot without connecting to bus */
rc = p_slot->hpc_ops->power_on_slot(p_slot);
if (rc) {
err("%s: Failed to power on slot\n", __FUNCTION__);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
return -1;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
rc = p_slot->hpc_ops->check_cmd_status(ctrl);
if (rc) {
err("%s: Failed to power on slot, error code(%d)\n", __FUNCTION__, rc);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
return -1;
}
if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) {
if (slots_not_empty)
return WRONG_BUS_FREQUENCY;
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
up(&ctrl->crit_sect);
return WRONG_BUS_FREQUENCY;
}
wait_for_ctrl_irq (ctrl);
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n",
__FUNCTION__);
err("%s: Error code (%d)\n", __FUNCTION__, rc);
up(&ctrl->crit_sect);
return WRONG_BUS_FREQUENCY;
}
/* turn on board, blink green LED, turn off Amber LED */
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
up(&ctrl->crit_sect);
return rc;
}
wait_for_ctrl_irq (ctrl);
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc);
up(&ctrl->crit_sect);
return rc;
}
}
rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &adapter_speed);
/* 0 = PCI 33Mhz, 1 = PCI 66 Mhz, 2 = PCI-X 66 PA, 4 = PCI-X 66 ECC, */
/* 5 = PCI-X 133 PA, 7 = PCI-X 133 ECC, 0xa = PCI-X 133 Mhz 266, */
/* 0xd = PCI-X 133 Mhz 533 */
/* This encoding is different from the one used in cur_bus_speed & */
/* max_bus_speed */
if (rc || adapter_speed == PCI_SPEED_UNKNOWN) {
err("%s: Can't get adapter speed or bus mode mismatch\n", __FUNCTION__);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
return WRONG_BUS_FREQUENCY;
}
rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bus_speed);
if (rc || bus_speed == PCI_SPEED_UNKNOWN) {
err("%s: Can't get bus operation speed\n", __FUNCTION__);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
return WRONG_BUS_FREQUENCY;
}
rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &max_bus_speed);
if (rc || max_bus_speed == PCI_SPEED_UNKNOWN) {
err("%s: Can't get max bus operation speed\n", __FUNCTION__);
max_bus_speed = bus_speed;
}
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
if ((rc = p_slot->hpc_ops->get_prog_int(p_slot, &pi))) {
err("%s: Can't get controller programming interface, set it to 1\n", __FUNCTION__);
pi = 1;
}
/* Check if there are other slots or devices on the same bus */
if (!list_empty(&ctrl->pci_dev->subordinate->devices))
slots_not_empty = 1;
dbg("%s: slots_not_empty %d, pi %d\n", __FUNCTION__,
slots_not_empty, pi);
dbg("adapter_speed %d, bus_speed %d, max_bus_speed %d\n",
adapter_speed, bus_speed, max_bus_speed);
if (pi == 2) {
dbg("%s: In PI = %d\n", __FUNCTION__, pi);
if ((rc = p_slot->hpc_ops->get_mode1_ECC_cap(p_slot, &mode))) {
err("%s: Can't get Mode1_ECC, set mode to 0\n", __FUNCTION__);
mode = 0;
}
switch (adapter_speed) {
case PCI_SPEED_133MHz_PCIX_533:
case PCI_SPEED_133MHz_PCIX_266:
if ((bus_speed != adapter_speed) &&
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
return rc;
break;
case PCI_SPEED_133MHz_PCIX_ECC:
case PCI_SPEED_133MHz_PCIX:
if (mode) { /* Bus - Mode 1 ECC */
if ((bus_speed != 0x7) &&
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
return rc;
} else {
if ((bus_speed != 0x4) &&
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
return rc;
}
break;
case PCI_SPEED_66MHz_PCIX_ECC:
case PCI_SPEED_66MHz_PCIX:
if (mode) { /* Bus - Mode 1 ECC */
if ((bus_speed != 0x5) &&
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
return rc;
} else {
if ((bus_speed != 0x2) &&
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
return rc;
}
break;
case PCI_SPEED_66MHz:
if ((bus_speed != 0x1) &&
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
return rc;
break;
case PCI_SPEED_33MHz:
if (bus_speed > 0x0) {
if (slots_not_empty == 0) {
if ((rc = change_bus_speed(ctrl, p_slot, adapter_speed)))
return rc;
} else {
err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed);
return WRONG_BUS_FREQUENCY;
}
}
break;
default:
err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed);
return WRONG_BUS_FREQUENCY;
}
} else {
/* If adpater_speed == bus_speed, nothing to do here */
dbg("%s: In PI = %d\n", __FUNCTION__, pi);
if ((adapter_speed != bus_speed) &&
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
return rc;
}
down(&ctrl->crit_sect);
/* turn on board, blink green LED, turn off Amber LED */
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
up(&ctrl->crit_sect);
return rc;
}
wait_for_ctrl_irq (ctrl);
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc);
up(&ctrl->crit_sect);
return rc;
}
up(&ctrl->crit_sect);
/* Wait for ~1 second */
wait_for_ctrl_irq (ctrl);
dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status);
/* Check for a power fault */
if (p_slot->status == 0xFF) {
/* power fault occurred, but it was benign */
dbg("%s: power fault\n", __FUNCTION__);
rc = POWER_FAILURE;
p_slot->status = 0;
goto err_exit;
}
if (shpchp_configure_device(p_slot)) {
err("Cannot add device at 0x%x:0x%x\n", p_slot->bus,
p_slot->device);
goto err_exit;
}
p_slot->status = 0;
p_slot->is_a_board = 0x01;
p_slot->pwr_save = 1;
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
p_slot->hpc_ops->green_led_on(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
return 0;
err_exit:
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
/* turn off slot, turn on Amber LED, turn off Green LED */
rc = p_slot->hpc_ops->slot_disable(p_slot);
if (rc) {
err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
return rc;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
rc = p_slot->hpc_ops->check_cmd_status(ctrl);
if (rc) {
err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
return rc;
}
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
return(rc);
}
/**
* remove_board - Turns off slot and LED's
*
*/
static int remove_board(struct slot *p_slot)
{
struct controller *ctrl = p_slot->ctrl;
u8 hp_slot;
int rc;
if (shpchp_unconfigure_device(p_slot))
return(1);
hp_slot = p_slot->device - ctrl->slot_device_offset;
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
/* Change status to shutdown */
if (p_slot->is_a_board)
p_slot->status = 0x01;
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
/* turn off slot, turn on Amber LED, turn off Green LED */
rc = p_slot->hpc_ops->slot_disable(p_slot);
if (rc) {
err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
return rc;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
rc = p_slot->hpc_ops->check_cmd_status(ctrl);
if (rc) {
err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
return rc;
}
rc = p_slot->hpc_ops->set_attention_status(p_slot, 0);
if (rc) {
err("%s: Issue of Set Attention command failed\n", __FUNCTION__);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
return rc;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
p_slot->pwr_save = 0;
p_slot->is_a_board = 0;
return 0;
}
static void pushbutton_helper_thread (unsigned long data)
{
pushbutton_pending = data;
up(&event_semaphore);
}
/**
* shpchp_pushbutton_thread
*
* Scheduled procedure to handle blocking stuff for the pushbuttons
* Handles all pending events and exits.
*
*/
static void shpchp_pushbutton_thread (unsigned long slot)
{
struct slot *p_slot = (struct slot *) slot;
u8 getstatus;
pushbutton_pending = 0;
if (!p_slot) {
dbg("%s: Error! slot NULL\n", __FUNCTION__);
return;
}
p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (getstatus) {
p_slot->state = POWEROFF_STATE;
shpchp_disable_slot(p_slot);
p_slot->state = STATIC_STATE;
} else {
p_slot->state = POWERON_STATE;
if (shpchp_enable_slot(p_slot)) {
/* Wait for exclusive access to hardware */
down(&p_slot->ctrl->crit_sect);
p_slot->hpc_ops->green_led_off(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (p_slot->ctrl);
/* Done with exclusive hardware access */
up(&p_slot->ctrl->crit_sect);
}
p_slot->state = STATIC_STATE;
}
return;
}
/* this is the main worker thread */
static int event_thread(void* data)
{
struct controller *ctrl;
lock_kernel();
daemonize("shpchpd_event");
unlock_kernel();
while (1) {
dbg("!!!!event_thread sleeping\n");
down_interruptible (&event_semaphore);
dbg("event_thread woken finished = %d\n", event_finished);
if (event_finished || signal_pending(current))
break;
/* Do stuff here */
if (pushbutton_pending)
shpchp_pushbutton_thread(pushbutton_pending);
else
for (ctrl = shpchp_ctrl_list; ctrl; ctrl=ctrl->next)
interrupt_event_handler(ctrl);
}
dbg("event_thread signals exit\n");
up(&event_exit);
return 0;
}
int shpchp_event_start_thread (void)
{
int pid;
/* initialize our semaphores */
init_MUTEX_LOCKED(&event_exit);
event_finished=0;
init_MUTEX_LOCKED(&event_semaphore);
pid = kernel_thread(event_thread, NULL, 0);
if (pid < 0) {
err ("Can't start up our event thread\n");
return -1;
}
return 0;
}
void shpchp_event_stop_thread (void)
{
event_finished = 1;
up(&event_semaphore);
down(&event_exit);
}
static int update_slot_info (struct slot *slot)
{
struct hotplug_slot_info *info;
int result;
info = kmalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
slot->hpc_ops->get_power_status(slot, &(info->power_status));
slot->hpc_ops->get_attention_status(slot, &(info->attention_status));
slot->hpc_ops->get_latch_status(slot, &(info->latch_status));
slot->hpc_ops->get_adapter_status(slot, &(info->adapter_status));
result = pci_hp_change_slot_info(slot->hotplug_slot, info);
kfree (info);
return result;
}
static void interrupt_event_handler(struct controller *ctrl)
{
int loop = 0;
int change = 1;
u8 hp_slot;
u8 getstatus;
struct slot *p_slot;
while (change) {
change = 0;
for (loop = 0; loop < 10; loop++) {
if (ctrl->event_queue[loop].event_type != 0) {
dbg("%s:loop %x event_type %x\n", __FUNCTION__, loop,
ctrl->event_queue[loop].event_type);
hp_slot = ctrl->event_queue[loop].hp_slot;
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) {
dbg("%s: button cancel\n", __FUNCTION__);
del_timer(&p_slot->task_event);
switch (p_slot->state) {
case BLINKINGOFF_STATE:
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
p_slot->hpc_ops->green_led_on(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
p_slot->hpc_ops->set_attention_status(p_slot, 0);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
break;
case BLINKINGON_STATE:
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
p_slot->hpc_ops->green_led_off(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
p_slot->hpc_ops->set_attention_status(p_slot, 0);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
break;
default:
warn("Not a valid state\n");
return;
}
info(msg_button_cancel, p_slot->number);
p_slot->state = STATIC_STATE;
} else if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) {
/* Button Pressed (No action on 1st press...) */
dbg("%s: Button pressed\n", __FUNCTION__);
p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (getstatus) {
/* slot is on */
dbg("%s: slot is on\n", __FUNCTION__);
p_slot->state = BLINKINGOFF_STATE;
info(msg_button_off, p_slot->number);
} else {
/* slot is off */
dbg("%s: slot is off\n", __FUNCTION__);
p_slot->state = BLINKINGON_STATE;
info(msg_button_on, p_slot->number);
}
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
/* blink green LED and turn off amber */
p_slot->hpc_ops->green_led_blink(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
p_slot->hpc_ops->set_attention_status(p_slot, 0);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
init_timer(&p_slot->task_event);
p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */
p_slot->task_event.function = (void (*)(unsigned long)) pushbutton_helper_thread;
p_slot->task_event.data = (unsigned long) p_slot;
dbg("%s: add_timer p_slot = %p\n", __FUNCTION__,(void *) p_slot);
add_timer(&p_slot->task_event);
} else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) {
/***********POWER FAULT********************/
dbg("%s: power fault\n", __FUNCTION__);
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
p_slot->hpc_ops->set_attention_status(p_slot, 1);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
p_slot->hpc_ops->green_led_off(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
} else {
/* refresh notification */
if (p_slot)
update_slot_info(p_slot);
}
ctrl->event_queue[loop].event_type = 0;
change = 1;
}
} /* End of FOR loop */
}
return;
}
int shpchp_enable_slot (struct slot *p_slot)
{
u8 getstatus = 0;
int rc;
/* Check to see if (latch closed, card present, power off) */
down(&p_slot->ctrl->crit_sect);
rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (rc || !getstatus) {
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || getstatus) {
info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
up(&p_slot->ctrl->crit_sect);
p_slot->is_a_board = 1;
/* We have to save the presence info for these slots */
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save));
dbg("%s: p_slot->pwr_save %x\n", __FUNCTION__, p_slot->pwr_save);
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
rc = board_added(p_slot);
if (rc) {
p_slot->hpc_ops->get_adapter_status(p_slot,
&(p_slot->presence_save));
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
}
update_slot_info(p_slot);
return rc;
}
int shpchp_disable_slot (struct slot *p_slot)
{
u8 getstatus = 0;
int ret = 0;
if (!p_slot->ctrl)
return -ENODEV;
/* Check to see if (latch closed, card present, power on) */
down(&p_slot->ctrl->crit_sect);
ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (ret || !getstatus) {
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (ret || getstatus) {
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (ret || !getstatus) {
info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
up(&p_slot->ctrl->crit_sect);
ret = remove_board(p_slot);
update_slot_info(p_slot);
return ret;
}
|