Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 | // SPDX-License-Identifier: GPL-2.0+
/*
* aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget
*
* core.c - Top level support
*
* Copyright 2017 IBM Corporation
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/prefetch.h>
#include <linux/clk.h>
#include <linux/usb/gadget.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/dma-mapping.h>
#include "vhub.h"
void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req,
int status)
{
bool internal = req->internal;
struct ast_vhub *vhub = ep->vhub;
EPVDBG(ep, "completing request @%p, status %d\n", req, status);
list_del_init(&req->queue);
if ((req->req.status == -EINPROGRESS) || (status == -EOVERFLOW))
req->req.status = status;
if (req->req.dma) {
if (!WARN_ON(!ep->dev))
usb_gadget_unmap_request_by_dev(&vhub->pdev->dev,
&req->req, ep->epn.is_in);
req->req.dma = 0;
}
/*
* If this isn't an internal EP0 request, call the core
* to call the gadget completion.
*/
if (!internal) {
spin_unlock(&ep->vhub->lock);
usb_gadget_giveback_request(&ep->ep, &req->req);
spin_lock(&ep->vhub->lock);
}
}
void ast_vhub_nuke(struct ast_vhub_ep *ep, int status)
{
struct ast_vhub_req *req;
int count = 0;
/* Beware, lock will be dropped & req-acquired by done() */
while (!list_empty(&ep->queue)) {
req = list_first_entry(&ep->queue, struct ast_vhub_req, queue);
ast_vhub_done(ep, req, status);
count++;
}
if (count)
EPDBG(ep, "Nuked %d request(s)\n", count);
}
struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep,
gfp_t gfp_flags)
{
struct ast_vhub_req *req;
req = kzalloc(sizeof(*req), gfp_flags);
if (!req)
return NULL;
return &req->req;
}
void ast_vhub_free_request(struct usb_ep *u_ep, struct usb_request *u_req)
{
struct ast_vhub_req *req = to_ast_req(u_req);
kfree(req);
}
static irqreturn_t ast_vhub_irq(int irq, void *data)
{
struct ast_vhub *vhub = data;
irqreturn_t iret = IRQ_NONE;
u32 i, istat;
/* Stale interrupt while tearing down */
if (!vhub->ep0_bufs)
return IRQ_NONE;
spin_lock(&vhub->lock);
/* Read and ACK interrupts */
istat = readl(vhub->regs + AST_VHUB_ISR);
if (!istat)
goto bail;
writel(istat, vhub->regs + AST_VHUB_ISR);
iret = IRQ_HANDLED;
UDCVDBG(vhub, "irq status=%08x, ep_acks=%08x ep_nacks=%08x\n",
istat,
readl(vhub->regs + AST_VHUB_EP_ACK_ISR),
readl(vhub->regs + AST_VHUB_EP_NACK_ISR));
/* Handle generic EPs first */
if (istat & VHUB_IRQ_EP_POOL_ACK_STALL) {
u32 ep_acks = readl(vhub->regs + AST_VHUB_EP_ACK_ISR);
writel(ep_acks, vhub->regs + AST_VHUB_EP_ACK_ISR);
for (i = 0; ep_acks && i < vhub->max_epns; i++) {
u32 mask = VHUB_EP_IRQ(i);
if (ep_acks & mask) {
ast_vhub_epn_ack_irq(&vhub->epns[i]);
ep_acks &= ~mask;
}
}
}
/* Handle device interrupts */
if (istat & vhub->port_irq_mask) {
for (i = 0; i < vhub->max_ports; i++) {
if (istat & VHUB_DEV_IRQ(i))
ast_vhub_dev_irq(&vhub->ports[i].dev);
}
}
/* Handle top-level vHub EP0 interrupts */
if (istat & (VHUB_IRQ_HUB_EP0_OUT_ACK_STALL |
VHUB_IRQ_HUB_EP0_IN_ACK_STALL |
VHUB_IRQ_HUB_EP0_SETUP)) {
if (istat & VHUB_IRQ_HUB_EP0_IN_ACK_STALL)
ast_vhub_ep0_handle_ack(&vhub->ep0, true);
if (istat & VHUB_IRQ_HUB_EP0_OUT_ACK_STALL)
ast_vhub_ep0_handle_ack(&vhub->ep0, false);
if (istat & VHUB_IRQ_HUB_EP0_SETUP)
ast_vhub_ep0_handle_setup(&vhub->ep0);
}
/* Various top level bus events */
if (istat & (VHUB_IRQ_BUS_RESUME |
VHUB_IRQ_BUS_SUSPEND |
VHUB_IRQ_BUS_RESET)) {
if (istat & VHUB_IRQ_BUS_RESUME)
ast_vhub_hub_resume(vhub);
if (istat & VHUB_IRQ_BUS_SUSPEND)
ast_vhub_hub_suspend(vhub);
if (istat & VHUB_IRQ_BUS_RESET)
ast_vhub_hub_reset(vhub);
}
bail:
spin_unlock(&vhub->lock);
return iret;
}
void ast_vhub_init_hw(struct ast_vhub *vhub)
{
u32 ctrl, port_mask, epn_mask;
UDCDBG(vhub,"(Re)Starting HW ...\n");
/* Enable PHY */
ctrl = VHUB_CTRL_PHY_CLK |
VHUB_CTRL_PHY_RESET_DIS;
/*
* We do *NOT* set the VHUB_CTRL_CLK_STOP_SUSPEND bit
* to stop the logic clock during suspend because
* it causes the registers to become inaccessible and
* we haven't yet figured out a good wayt to bring the
* controller back into life to issue a wakeup.
*/
/*
* Set some ISO & split control bits according to Aspeed
* recommendation
*
* VHUB_CTRL_ISO_RSP_CTRL: When set tells the HW to respond
* with 0 bytes data packet to ISO IN endpoints when no data
* is available.
*
* VHUB_CTRL_SPLIT_IN: This makes a SOF complete a split IN
* transaction.
*/
ctrl |= VHUB_CTRL_ISO_RSP_CTRL | VHUB_CTRL_SPLIT_IN;
writel(ctrl, vhub->regs + AST_VHUB_CTRL);
udelay(1);
/* Set descriptor ring size */
if (AST_VHUB_DESCS_COUNT == 256) {
ctrl |= VHUB_CTRL_LONG_DESC;
writel(ctrl, vhub->regs + AST_VHUB_CTRL);
} else {
BUILD_BUG_ON(AST_VHUB_DESCS_COUNT != 32);
}
/* Reset all devices */
port_mask = GENMASK(vhub->max_ports, 1);
writel(VHUB_SW_RESET_ROOT_HUB |
VHUB_SW_RESET_DMA_CONTROLLER |
VHUB_SW_RESET_EP_POOL |
port_mask, vhub->regs + AST_VHUB_SW_RESET);
udelay(1);
writel(0, vhub->regs + AST_VHUB_SW_RESET);
/* Disable and cleanup EP ACK/NACK interrupts */
epn_mask = GENMASK(vhub->max_epns - 1, 0);
writel(0, vhub->regs + AST_VHUB_EP_ACK_IER);
writel(0, vhub->regs + AST_VHUB_EP_NACK_IER);
writel(epn_mask, vhub->regs + AST_VHUB_EP_ACK_ISR);
writel(epn_mask, vhub->regs + AST_VHUB_EP_NACK_ISR);
/* Default settings for EP0, enable HW hub EP1 */
writel(0, vhub->regs + AST_VHUB_EP0_CTRL);
writel(VHUB_EP1_CTRL_RESET_TOGGLE |
VHUB_EP1_CTRL_ENABLE,
vhub->regs + AST_VHUB_EP1_CTRL);
writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG);
/* Configure EP0 DMA buffer */
writel(vhub->ep0.buf_dma, vhub->regs + AST_VHUB_EP0_DATA);
/* Clear address */
writel(0, vhub->regs + AST_VHUB_CONF);
/* Pullup hub (activate on host) */
if (vhub->force_usb1)
ctrl |= VHUB_CTRL_FULL_SPEED_ONLY;
ctrl |= VHUB_CTRL_UPSTREAM_CONNECT;
writel(ctrl, vhub->regs + AST_VHUB_CTRL);
/* Enable some interrupts */
writel(VHUB_IRQ_HUB_EP0_IN_ACK_STALL |
VHUB_IRQ_HUB_EP0_OUT_ACK_STALL |
VHUB_IRQ_HUB_EP0_SETUP |
VHUB_IRQ_EP_POOL_ACK_STALL |
VHUB_IRQ_BUS_RESUME |
VHUB_IRQ_BUS_SUSPEND |
VHUB_IRQ_BUS_RESET,
vhub->regs + AST_VHUB_IER);
}
static void ast_vhub_remove(struct platform_device *pdev)
{
struct ast_vhub *vhub = platform_get_drvdata(pdev);
unsigned long flags;
int i;
if (!vhub || !vhub->regs)
return;
/* Remove devices */
for (i = 0; i < vhub->max_ports; i++)
ast_vhub_del_dev(&vhub->ports[i].dev);
spin_lock_irqsave(&vhub->lock, flags);
/* Mask & ack all interrupts */
writel(0, vhub->regs + AST_VHUB_IER);
writel(VHUB_IRQ_ACK_ALL, vhub->regs + AST_VHUB_ISR);
/* Pull device, leave PHY enabled */
writel(VHUB_CTRL_PHY_CLK |
VHUB_CTRL_PHY_RESET_DIS,
vhub->regs + AST_VHUB_CTRL);
if (vhub->clk)
clk_disable_unprepare(vhub->clk);
spin_unlock_irqrestore(&vhub->lock, flags);
if (vhub->ep0_bufs)
dma_free_coherent(&pdev->dev,
AST_VHUB_EP0_MAX_PACKET *
(vhub->max_ports + 1),
vhub->ep0_bufs,
vhub->ep0_bufs_dma);
vhub->ep0_bufs = NULL;
}
static int ast_vhub_probe(struct platform_device *pdev)
{
enum usb_device_speed max_speed;
struct ast_vhub *vhub;
struct resource *res;
int i, rc = 0;
const struct device_node *np = pdev->dev.of_node;
vhub = devm_kzalloc(&pdev->dev, sizeof(*vhub), GFP_KERNEL);
if (!vhub)
return -ENOMEM;
rc = of_property_read_u32(np, "aspeed,vhub-downstream-ports",
&vhub->max_ports);
if (rc < 0)
vhub->max_ports = AST_VHUB_NUM_PORTS;
vhub->ports = devm_kcalloc(&pdev->dev, vhub->max_ports,
sizeof(*vhub->ports), GFP_KERNEL);
if (!vhub->ports)
return -ENOMEM;
rc = of_property_read_u32(np, "aspeed,vhub-generic-endpoints",
&vhub->max_epns);
if (rc < 0)
vhub->max_epns = AST_VHUB_NUM_GEN_EPs;
vhub->epns = devm_kcalloc(&pdev->dev, vhub->max_epns,
sizeof(*vhub->epns), GFP_KERNEL);
if (!vhub->epns)
return -ENOMEM;
spin_lock_init(&vhub->lock);
vhub->pdev = pdev;
vhub->port_irq_mask = GENMASK(VHUB_IRQ_DEV1_BIT + vhub->max_ports - 1,
VHUB_IRQ_DEV1_BIT);
vhub->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(vhub->regs)) {
dev_err(&pdev->dev, "Failed to map resources\n");
return PTR_ERR(vhub->regs);
}
UDCDBG(vhub, "vHub@%pR mapped @%p\n", res, vhub->regs);
platform_set_drvdata(pdev, vhub);
vhub->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(vhub->clk)) {
rc = PTR_ERR(vhub->clk);
goto err;
}
rc = clk_prepare_enable(vhub->clk);
if (rc) {
dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", rc);
goto err;
}
/* Check if we need to limit the HW to USB1 */
max_speed = usb_get_maximum_speed(&pdev->dev);
if (max_speed != USB_SPEED_UNKNOWN && max_speed < USB_SPEED_HIGH)
vhub->force_usb1 = true;
/* Mask & ack all interrupts before installing the handler */
writel(0, vhub->regs + AST_VHUB_IER);
writel(VHUB_IRQ_ACK_ALL, vhub->regs + AST_VHUB_ISR);
/* Find interrupt and install handler */
vhub->irq = platform_get_irq(pdev, 0);
if (vhub->irq < 0) {
rc = vhub->irq;
goto err;
}
rc = devm_request_irq(&pdev->dev, vhub->irq, ast_vhub_irq, 0,
KBUILD_MODNAME, vhub);
if (rc) {
dev_err(&pdev->dev, "Failed to request interrupt\n");
goto err;
}
/*
* Allocate DMA buffers for all EP0s in one chunk,
* one per port and one for the vHub itself
*/
vhub->ep0_bufs = dma_alloc_coherent(&pdev->dev,
AST_VHUB_EP0_MAX_PACKET *
(vhub->max_ports + 1),
&vhub->ep0_bufs_dma, GFP_KERNEL);
if (!vhub->ep0_bufs) {
dev_err(&pdev->dev, "Failed to allocate EP0 DMA buffers\n");
rc = -ENOMEM;
goto err;
}
UDCVDBG(vhub, "EP0 DMA buffers @%p (DMA 0x%08x)\n",
vhub->ep0_bufs, (u32)vhub->ep0_bufs_dma);
/* Init vHub EP0 */
ast_vhub_init_ep0(vhub, &vhub->ep0, NULL);
/* Init devices */
for (i = 0; i < vhub->max_ports && rc == 0; i++)
rc = ast_vhub_init_dev(vhub, i);
if (rc)
goto err;
/* Init hub emulation */
rc = ast_vhub_init_hub(vhub);
if (rc)
goto err;
/* Initialize HW */
ast_vhub_init_hw(vhub);
dev_info(&pdev->dev, "Initialized virtual hub in USB%d mode\n",
vhub->force_usb1 ? 1 : 2);
return 0;
err:
ast_vhub_remove(pdev);
return rc;
}
static const struct of_device_id ast_vhub_dt_ids[] = {
{
.compatible = "aspeed,ast2400-usb-vhub",
},
{
.compatible = "aspeed,ast2500-usb-vhub",
},
{
.compatible = "aspeed,ast2600-usb-vhub",
},
{ }
};
MODULE_DEVICE_TABLE(of, ast_vhub_dt_ids);
static struct platform_driver ast_vhub_driver = {
.probe = ast_vhub_probe,
.remove_new = ast_vhub_remove,
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = ast_vhub_dt_ids,
},
};
module_platform_driver(ast_vhub_driver);
MODULE_DESCRIPTION("Aspeed vHub udc driver");
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
MODULE_LICENSE("GPL");
|