Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
/*
 * HID over I2C protocol implementation
 *
 * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
 * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France
 * Copyright (c) 2012 Red Hat, Inc
 *
 * This code is partly based on "USB HID support for Linux":
 *
 *  Copyright (c) 1999 Andreas Gal
 *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
 *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
 *  Copyright (c) 2007-2008 Oliver Neukum
 *  Copyright (c) 2006-2010 Jiri Kosina
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file COPYING in the main directory of this archive for
 * more details.
 */

#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pm.h>
#include <linux/pm_wakeirq.h>
#include <linux/device.h>
#include <linux/wait.h>
#include <linux/err.h>
#include <linux/string.h>
#include <linux/list.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/hid.h>
#include <linux/mutex.h>
#include <asm/unaligned.h>

#include "../hid-ids.h"
#include "i2c-hid.h"

/* quirks to control the device */
#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV	BIT(0)
#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET	BIT(1)
#define I2C_HID_QUIRK_BOGUS_IRQ			BIT(4)
#define I2C_HID_QUIRK_RESET_ON_RESUME		BIT(5)
#define I2C_HID_QUIRK_BAD_INPUT_SIZE		BIT(6)
#define I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET	BIT(7)

/* Command opcodes */
#define I2C_HID_OPCODE_RESET			0x01
#define I2C_HID_OPCODE_GET_REPORT		0x02
#define I2C_HID_OPCODE_SET_REPORT		0x03
#define I2C_HID_OPCODE_GET_IDLE			0x04
#define I2C_HID_OPCODE_SET_IDLE			0x05
#define I2C_HID_OPCODE_GET_PROTOCOL		0x06
#define I2C_HID_OPCODE_SET_PROTOCOL		0x07
#define I2C_HID_OPCODE_SET_POWER		0x08

/* flags */
#define I2C_HID_STARTED		0
#define I2C_HID_RESET_PENDING	1
#define I2C_HID_READ_PENDING	2

#define I2C_HID_PWR_ON		0x00
#define I2C_HID_PWR_SLEEP	0x01

#define i2c_hid_dbg(ihid, ...) dev_dbg(&(ihid)->client->dev, __VA_ARGS__)

struct i2c_hid_desc {
	__le16 wHIDDescLength;
	__le16 bcdVersion;
	__le16 wReportDescLength;
	__le16 wReportDescRegister;
	__le16 wInputRegister;
	__le16 wMaxInputLength;
	__le16 wOutputRegister;
	__le16 wMaxOutputLength;
	__le16 wCommandRegister;
	__le16 wDataRegister;
	__le16 wVendorID;
	__le16 wProductID;
	__le16 wVersionID;
	__le32 reserved;
} __packed;

/* The main device structure */
struct i2c_hid {
	struct i2c_client	*client;	/* i2c client */
	struct hid_device	*hid;	/* pointer to corresponding HID dev */
	struct i2c_hid_desc hdesc;		/* the HID Descriptor */
	__le16			wHIDDescRegister; /* location of the i2c
						   * register of the HID
						   * descriptor. */
	unsigned int		bufsize;	/* i2c buffer size */
	u8			*inbuf;		/* Input buffer */
	u8			*rawbuf;	/* Raw Input buffer */
	u8			*cmdbuf;	/* Command buffer */

	unsigned long		flags;		/* device flags */
	unsigned long		quirks;		/* Various quirks */

	wait_queue_head_t	wait;		/* For waiting the interrupt */

	struct mutex		reset_lock;

	struct i2chid_ops	*ops;
};

static const struct i2c_hid_quirks {
	__u16 idVendor;
	__u16 idProduct;
	__u32 quirks;
} i2c_hid_quirks[] = {
	{ USB_VENDOR_ID_WEIDA, HID_ANY_ID,
		I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
	{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
		I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
	{ I2C_VENDOR_ID_ITE, I2C_DEVICE_ID_ITE_VOYO_WINPAD_A15,
		I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
	{ I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_3118,
		I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
	{ USB_VENDOR_ID_ALPS_JP, HID_ANY_ID,
		 I2C_HID_QUIRK_RESET_ON_RESUME },
	{ I2C_VENDOR_ID_SYNAPTICS, I2C_PRODUCT_ID_SYNAPTICS_SYNA2393,
		 I2C_HID_QUIRK_RESET_ON_RESUME },
	{ USB_VENDOR_ID_ITE, I2C_DEVICE_ID_ITE_LENOVO_LEGION_Y720,
		I2C_HID_QUIRK_BAD_INPUT_SIZE },
	/*
	 * Sending the wakeup after reset actually break ELAN touchscreen controller
	 */
	{ USB_VENDOR_ID_ELAN, HID_ANY_ID,
		 I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET |
		 I2C_HID_QUIRK_BOGUS_IRQ },
	{ 0, 0 }
};

/*
 * i2c_hid_lookup_quirk: return any quirks associated with a I2C HID device
 * @idVendor: the 16-bit vendor ID
 * @idProduct: the 16-bit product ID
 *
 * Returns: a u32 quirks value.
 */
static u32 i2c_hid_lookup_quirk(const u16 idVendor, const u16 idProduct)
{
	u32 quirks = 0;
	int n;

	for (n = 0; i2c_hid_quirks[n].idVendor; n++)
		if (i2c_hid_quirks[n].idVendor == idVendor &&
		    (i2c_hid_quirks[n].idProduct == (__u16)HID_ANY_ID ||
		     i2c_hid_quirks[n].idProduct == idProduct))
			quirks = i2c_hid_quirks[n].quirks;

	return quirks;
}

static int i2c_hid_xfer(struct i2c_hid *ihid,
			u8 *send_buf, int send_len, u8 *recv_buf, int recv_len)
{
	struct i2c_client *client = ihid->client;
	struct i2c_msg msgs[2] = { 0 };
	int n = 0;
	int ret;

	if (send_len) {
		i2c_hid_dbg(ihid, "%s: cmd=%*ph\n",
			    __func__, send_len, send_buf);

		msgs[n].addr = client->addr;
		msgs[n].flags = (client->flags & I2C_M_TEN) | I2C_M_DMA_SAFE;
		msgs[n].len = send_len;
		msgs[n].buf = send_buf;
		n++;
	}

	if (recv_len) {
		msgs[n].addr = client->addr;
		msgs[n].flags = (client->flags & I2C_M_TEN) |
				I2C_M_RD | I2C_M_DMA_SAFE;
		msgs[n].len = recv_len;
		msgs[n].buf = recv_buf;
		n++;

		set_bit(I2C_HID_READ_PENDING, &ihid->flags);
	}

	ret = i2c_transfer(client->adapter, msgs, n);

	if (recv_len)
		clear_bit(I2C_HID_READ_PENDING, &ihid->flags);

	if (ret != n)
		return ret < 0 ? ret : -EIO;

	return 0;
}

static int i2c_hid_read_register(struct i2c_hid *ihid, __le16 reg,
				 void *buf, size_t len)
{
	*(__le16 *)ihid->cmdbuf = reg;

	return i2c_hid_xfer(ihid, ihid->cmdbuf, sizeof(__le16), buf, len);
}

static size_t i2c_hid_encode_command(u8 *buf, u8 opcode,
				     int report_type, int report_id)
{
	size_t length = 0;

	if (report_id < 0x0F) {
		buf[length++] = report_type << 4 | report_id;
		buf[length++] = opcode;
	} else {
		buf[length++] = report_type << 4 | 0x0F;
		buf[length++] = opcode;
		buf[length++] = report_id;
	}

	return length;
}

static int i2c_hid_get_report(struct i2c_hid *ihid,
			      u8 report_type, u8 report_id,
			      u8 *recv_buf, size_t recv_len)
{
	size_t length = 0;
	size_t ret_count;
	int error;

	i2c_hid_dbg(ihid, "%s\n", __func__);

	/* Command register goes first */
	*(__le16 *)ihid->cmdbuf = ihid->hdesc.wCommandRegister;
	length += sizeof(__le16);
	/* Next is GET_REPORT command */
	length += i2c_hid_encode_command(ihid->cmdbuf + length,
					 I2C_HID_OPCODE_GET_REPORT,
					 report_type, report_id);
	/*
	 * Device will send report data through data register. Because
	 * command can be either 2 or 3 bytes destination for the data
	 * register may be not aligned.
	 */
	put_unaligned_le16(le16_to_cpu(ihid->hdesc.wDataRegister),
			   ihid->cmdbuf + length);
	length += sizeof(__le16);

	/*
	 * In addition to report data device will supply data length
	 * in the first 2 bytes of the response, so adjust .
	 */
	error = i2c_hid_xfer(ihid, ihid->cmdbuf, length,
			     ihid->rawbuf, recv_len + sizeof(__le16));
	if (error) {
		dev_err(&ihid->client->dev,
			"failed to set a report to device: %d\n", error);
		return error;
	}

	/* The buffer is sufficiently aligned */
	ret_count = le16_to_cpup((__le16 *)ihid->rawbuf);

	/* Check for empty report response */
	if (ret_count <= sizeof(__le16))
		return 0;

	recv_len = min(recv_len, ret_count - sizeof(__le16));
	memcpy(recv_buf, ihid->rawbuf + sizeof(__le16), recv_len);

	if (report_id && recv_len != 0 && recv_buf[0] != report_id) {
		dev_err(&ihid->client->dev,
			"device returned incorrect report (%d vs %d expected)\n",
			recv_buf[0], report_id);
		return -EINVAL;
	}

	return recv_len;
}

static size_t i2c_hid_format_report(u8 *buf, int report_id,
				    const u8 *data, size_t size)
{
	size_t length = sizeof(__le16); /* reserve space to store size */

	if (report_id)
		buf[length++] = report_id;

	memcpy(buf + length, data, size);
	length += size;

	/* Store overall size in the beginning of the buffer */
	put_unaligned_le16(length, buf);

	return length;
}

/**
 * i2c_hid_set_or_send_report: forward an incoming report to the device
 * @ihid: the i2c hid device
 * @report_type: 0x03 for HID_FEATURE_REPORT ; 0x02 for HID_OUTPUT_REPORT
 * @report_id: the report ID
 * @buf: the actual data to transfer, without the report ID
 * @data_len: size of buf
 * @do_set: true: use SET_REPORT HID command, false: send plain OUTPUT report
 */
static int i2c_hid_set_or_send_report(struct i2c_hid *ihid,
				      u8 report_type, u8 report_id,
				      const u8 *buf, size_t data_len,
				      bool do_set)
{
	size_t length = 0;
	int error;

	i2c_hid_dbg(ihid, "%s\n", __func__);

	if (data_len > ihid->bufsize)
		return -EINVAL;

	if (!do_set && le16_to_cpu(ihid->hdesc.wMaxOutputLength) == 0)
		return -ENOSYS;

	if (do_set) {
		/* Command register goes first */
		*(__le16 *)ihid->cmdbuf = ihid->hdesc.wCommandRegister;
		length += sizeof(__le16);
		/* Next is SET_REPORT command */
		length += i2c_hid_encode_command(ihid->cmdbuf + length,
						 I2C_HID_OPCODE_SET_REPORT,
						 report_type, report_id);
		/*
		 * Report data will go into the data register. Because
		 * command can be either 2 or 3 bytes destination for
		 * the data register may be not aligned.
		*/
		put_unaligned_le16(le16_to_cpu(ihid->hdesc.wDataRegister),
				   ihid->cmdbuf + length);
		length += sizeof(__le16);
	} else {
		/*
		 * With simple "send report" all data goes into the output
		 * register.
		 */
		*(__le16 *)ihid->cmdbuf = ihid->hdesc.wOutputRegister;
		length += sizeof(__le16);
	}

	length += i2c_hid_format_report(ihid->cmdbuf + length,
					report_id, buf, data_len);

	error = i2c_hid_xfer(ihid, ihid->cmdbuf, length, NULL, 0);
	if (error) {
		dev_err(&ihid->client->dev,
			"failed to set a report to device: %d\n", error);
		return error;
	}

	return data_len;
}

static int i2c_hid_set_power_command(struct i2c_hid *ihid, int power_state)
{
	size_t length;

	/* SET_POWER uses command register */
	*(__le16 *)ihid->cmdbuf = ihid->hdesc.wCommandRegister;
	length = sizeof(__le16);

	/* Now the command itself */
	length += i2c_hid_encode_command(ihid->cmdbuf + length,
					 I2C_HID_OPCODE_SET_POWER,
					 0, power_state);

	return i2c_hid_xfer(ihid, ihid->cmdbuf, length, NULL, 0);
}

static int i2c_hid_set_power(struct i2c_hid *ihid, int power_state)
{
	int ret;

	i2c_hid_dbg(ihid, "%s\n", __func__);

	/*
	 * Some devices require to send a command to wakeup before power on.
	 * The call will get a return value (EREMOTEIO) but device will be
	 * triggered and activated. After that, it goes like a normal device.
	 */
	if (power_state == I2C_HID_PWR_ON &&
	    ihid->quirks & I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV) {
		ret = i2c_hid_set_power_command(ihid, I2C_HID_PWR_ON);

		/* Device was already activated */
		if (!ret)
			goto set_pwr_exit;
	}

	ret = i2c_hid_set_power_command(ihid, power_state);
	if (ret)
		dev_err(&ihid->client->dev,
			"failed to change power setting.\n");

set_pwr_exit:

	/*
	 * The HID over I2C specification states that if a DEVICE needs time
	 * after the PWR_ON request, it should utilise CLOCK stretching.
	 * However, it has been observered that the Windows driver provides a
	 * 1ms sleep between the PWR_ON and RESET requests.
	 * According to Goodix Windows even waits 60 ms after (other?)
	 * PWR_ON requests. Testing has confirmed that several devices
	 * will not work properly without a delay after a PWR_ON request.
	 */
	if (!ret && power_state == I2C_HID_PWR_ON)
		msleep(60);

	return ret;
}

static int i2c_hid_execute_reset(struct i2c_hid *ihid)
{
	size_t length = 0;
	int ret;

	i2c_hid_dbg(ihid, "resetting...\n");

	/* Prepare reset command. Command register goes first. */
	*(__le16 *)ihid->cmdbuf = ihid->hdesc.wCommandRegister;
	length += sizeof(__le16);
	/* Next is RESET command itself */
	length += i2c_hid_encode_command(ihid->cmdbuf + length,
					 I2C_HID_OPCODE_RESET, 0, 0);

	set_bit(I2C_HID_RESET_PENDING, &ihid->flags);

	ret = i2c_hid_xfer(ihid, ihid->cmdbuf, length, NULL, 0);
	if (ret) {
		dev_err(&ihid->client->dev, "failed to reset device.\n");
		goto out;
	}

	if (ihid->quirks & I2C_HID_QUIRK_NO_IRQ_AFTER_RESET) {
		msleep(100);
		goto out;
	}

	i2c_hid_dbg(ihid, "%s: waiting...\n", __func__);
	if (!wait_event_timeout(ihid->wait,
				!test_bit(I2C_HID_RESET_PENDING, &ihid->flags),
				msecs_to_jiffies(5000))) {
		ret = -ENODATA;
		goto out;
	}
	i2c_hid_dbg(ihid, "%s: finished.\n", __func__);

out:
	clear_bit(I2C_HID_RESET_PENDING, &ihid->flags);
	return ret;
}

static int i2c_hid_hwreset(struct i2c_hid *ihid)
{
	int ret;

	i2c_hid_dbg(ihid, "%s\n", __func__);

	/*
	 * This prevents sending feature reports while the device is
	 * being reset. Otherwise we may lose the reset complete
	 * interrupt.
	 */
	mutex_lock(&ihid->reset_lock);

	ret = i2c_hid_set_power(ihid, I2C_HID_PWR_ON);
	if (ret)
		goto out_unlock;

	ret = i2c_hid_execute_reset(ihid);
	if (ret) {
		dev_err(&ihid->client->dev,
			"failed to reset device: %d\n", ret);
		i2c_hid_set_power(ihid, I2C_HID_PWR_SLEEP);
		goto out_unlock;
	}

	/* At least some SIS devices need this after reset */
	if (!(ihid->quirks & I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET))
		ret = i2c_hid_set_power(ihid, I2C_HID_PWR_ON);

out_unlock:
	mutex_unlock(&ihid->reset_lock);
	return ret;
}

static void i2c_hid_get_input(struct i2c_hid *ihid)
{
	u16 size = le16_to_cpu(ihid->hdesc.wMaxInputLength);
	u16 ret_size;
	int ret;

	if (size > ihid->bufsize)
		size = ihid->bufsize;

	ret = i2c_master_recv(ihid->client, ihid->inbuf, size);
	if (ret != size) {
		if (ret < 0)
			return;

		dev_err(&ihid->client->dev, "%s: got %d data instead of %d\n",
			__func__, ret, size);
		return;
	}

	/* Receiving buffer is properly aligned */
	ret_size = le16_to_cpup((__le16 *)ihid->inbuf);
	if (!ret_size) {
		/* host or device initiated RESET completed */
		if (test_and_clear_bit(I2C_HID_RESET_PENDING, &ihid->flags))
			wake_up(&ihid->wait);
		return;
	}

	if ((ihid->quirks & I2C_HID_QUIRK_BOGUS_IRQ) && ret_size == 0xffff) {
		dev_warn_once(&ihid->client->dev,
			      "%s: IRQ triggered but there's no data\n",
			      __func__);
		return;
	}

	if (ret_size > size || ret_size < sizeof(__le16)) {
		if (ihid->quirks & I2C_HID_QUIRK_BAD_INPUT_SIZE) {
			*(__le16 *)ihid->inbuf = cpu_to_le16(size);
			ret_size = size;
		} else {
			dev_err(&ihid->client->dev,
				"%s: incomplete report (%d/%d)\n",
				__func__, size, ret_size);
			return;
		}
	}

	i2c_hid_dbg(ihid, "input: %*ph\n", ret_size, ihid->inbuf);

	if (test_bit(I2C_HID_STARTED, &ihid->flags)) {
		if (ihid->hid->group != HID_GROUP_RMI)
			pm_wakeup_event(&ihid->client->dev, 0);

		hid_input_report(ihid->hid, HID_INPUT_REPORT,
				ihid->inbuf + sizeof(__le16),
				ret_size - sizeof(__le16), 1);
	}

	return;
}

static irqreturn_t i2c_hid_irq(int irq, void *dev_id)
{
	struct i2c_hid *ihid = dev_id;

	if (test_bit(I2C_HID_READ_PENDING, &ihid->flags))
		return IRQ_HANDLED;

	i2c_hid_get_input(ihid);

	return IRQ_HANDLED;
}

static int i2c_hid_get_report_length(struct hid_report *report)
{
	return ((report->size - 1) >> 3) + 1 +
		report->device->report_enum[report->type].numbered + 2;
}

/*
 * Traverse the supplied list of reports and find the longest
 */
static void i2c_hid_find_max_report(struct hid_device *hid, unsigned int type,
		unsigned int *max)
{
	struct hid_report *report;
	unsigned int size;

	/* We should not rely on wMaxInputLength, as some devices may set it to
	 * a wrong length. */
	list_for_each_entry(report, &hid->report_enum[type].report_list, list) {
		size = i2c_hid_get_report_length(report);
		if (*max < size)
			*max = size;
	}
}

static void i2c_hid_free_buffers(struct i2c_hid *ihid)
{
	kfree(ihid->inbuf);
	kfree(ihid->rawbuf);
	kfree(ihid->cmdbuf);
	ihid->inbuf = NULL;
	ihid->rawbuf = NULL;
	ihid->cmdbuf = NULL;
	ihid->bufsize = 0;
}

static int i2c_hid_alloc_buffers(struct i2c_hid *ihid, size_t report_size)
{
	/*
	 * The worst case is computed from the set_report command with a
	 * reportID > 15 and the maximum report length.
	 */
	int cmd_len = sizeof(__le16) +	/* command register */
		      sizeof(u8) +	/* encoded report type/ID */
		      sizeof(u8) +	/* opcode */
		      sizeof(u8) +	/* optional 3rd byte report ID */
		      sizeof(__le16) +	/* data register */
		      sizeof(__le16) +	/* report data size */
		      sizeof(u8) +	/* report ID if numbered report */
		      report_size;

	ihid->inbuf = kzalloc(report_size, GFP_KERNEL);
	ihid->rawbuf = kzalloc(report_size, GFP_KERNEL);
	ihid->cmdbuf = kzalloc(cmd_len, GFP_KERNEL);

	if (!ihid->inbuf || !ihid->rawbuf || !ihid->cmdbuf) {
		i2c_hid_free_buffers(ihid);
		return -ENOMEM;
	}

	ihid->bufsize = report_size;

	return 0;
}

static int i2c_hid_get_raw_report(struct hid_device *hid,
				  u8 report_type, u8 report_id,
				  u8 *buf, size_t count)
{
	struct i2c_client *client = hid->driver_data;
	struct i2c_hid *ihid = i2c_get_clientdata(client);
	int ret_count;

	if (report_type == HID_OUTPUT_REPORT)
		return -EINVAL;

	/*
	 * In case of unnumbered reports the response from the device will
	 * not have the report ID that the upper layers expect, so we need
	 * to stash it the buffer ourselves and adjust the data size.
	 */
	if (!report_id) {
		buf[0] = 0;
		buf++;
		count--;
	}

	ret_count = i2c_hid_get_report(ihid,
			report_type == HID_FEATURE_REPORT ? 0x03 : 0x01,
			report_id, buf, count);

	if (ret_count > 0 && !report_id)
		ret_count++;

	return ret_count;
}

static int i2c_hid_output_raw_report(struct hid_device *hid, u8 report_type,
				     const u8 *buf, size_t count, bool do_set)
{
	struct i2c_client *client = hid->driver_data;
	struct i2c_hid *ihid = i2c_get_clientdata(client);
	int report_id = buf[0];
	int ret;

	if (report_type == HID_INPUT_REPORT)
		return -EINVAL;

	mutex_lock(&ihid->reset_lock);

	/*
	 * Note that both numbered and unnumbered reports passed here
	 * are supposed to have report ID stored in the 1st byte of the
	 * buffer, so we strip it off unconditionally before passing payload
	 * to i2c_hid_set_or_send_report which takes care of encoding
	 * everything properly.
	 */
	ret = i2c_hid_set_or_send_report(ihid,
				report_type == HID_FEATURE_REPORT ? 0x03 : 0x02,
				report_id, buf + 1, count - 1, do_set);

	if (ret >= 0)
		ret++; /* add report_id to the number of transferred bytes */

	mutex_unlock(&ihid->reset_lock);

	return ret;
}

static int i2c_hid_output_report(struct hid_device *hid, u8 *buf, size_t count)
{
	return i2c_hid_output_raw_report(hid, HID_OUTPUT_REPORT, buf, count,
					 false);
}

static int i2c_hid_raw_request(struct hid_device *hid, unsigned char reportnum,
			       __u8 *buf, size_t len, unsigned char rtype,
			       int reqtype)
{
	switch (reqtype) {
	case HID_REQ_GET_REPORT:
		return i2c_hid_get_raw_report(hid, rtype, reportnum, buf, len);
	case HID_REQ_SET_REPORT:
		if (buf[0] != reportnum)
			return -EINVAL;
		return i2c_hid_output_raw_report(hid, rtype, buf, len, true);
	default:
		return -EIO;
	}
}

static int i2c_hid_parse(struct hid_device *hid)
{
	struct i2c_client *client = hid->driver_data;
	struct i2c_hid *ihid = i2c_get_clientdata(client);
	struct i2c_hid_desc *hdesc = &ihid->hdesc;
	unsigned int rsize;
	char *rdesc;
	int ret;
	int tries = 3;
	char *use_override;

	i2c_hid_dbg(ihid, "entering %s\n", __func__);

	rsize = le16_to_cpu(hdesc->wReportDescLength);
	if (!rsize || rsize > HID_MAX_DESCRIPTOR_SIZE) {
		dbg_hid("weird size of report descriptor (%u)\n", rsize);
		return -EINVAL;
	}

	do {
		ret = i2c_hid_hwreset(ihid);
		if (ret)
			msleep(1000);
	} while (tries-- > 0 && ret);

	if (ret)
		return ret;

	use_override = i2c_hid_get_dmi_hid_report_desc_override(client->name,
								&rsize);

	if (use_override) {
		rdesc = use_override;
		i2c_hid_dbg(ihid, "Using a HID report descriptor override\n");
	} else {
		rdesc = kzalloc(rsize, GFP_KERNEL);

		if (!rdesc) {
			dbg_hid("couldn't allocate rdesc memory\n");
			return -ENOMEM;
		}

		i2c_hid_dbg(ihid, "asking HID report descriptor\n");

		ret = i2c_hid_read_register(ihid,
					    ihid->hdesc.wReportDescRegister,
					    rdesc, rsize);
		if (ret) {
			hid_err(hid, "reading report descriptor failed\n");
			kfree(rdesc);
			return -EIO;
		}
	}

	i2c_hid_dbg(ihid, "Report Descriptor: %*ph\n", rsize, rdesc);

	ret = hid_parse_report(hid, rdesc, rsize);
	if (!use_override)
		kfree(rdesc);

	if (ret) {
		dbg_hid("parsing report descriptor failed\n");
		return ret;
	}

	return 0;
}

static int i2c_hid_start(struct hid_device *hid)
{
	struct i2c_client *client = hid->driver_data;
	struct i2c_hid *ihid = i2c_get_clientdata(client);
	int ret;
	unsigned int bufsize = HID_MIN_BUFFER_SIZE;

	i2c_hid_find_max_report(hid, HID_INPUT_REPORT, &bufsize);
	i2c_hid_find_max_report(hid, HID_OUTPUT_REPORT, &bufsize);
	i2c_hid_find_max_report(hid, HID_FEATURE_REPORT, &bufsize);

	if (bufsize > ihid->bufsize) {
		disable_irq(client->irq);
		i2c_hid_free_buffers(ihid);

		ret = i2c_hid_alloc_buffers(ihid, bufsize);
		enable_irq(client->irq);

		if (ret)
			return ret;
	}

	return 0;
}

static void i2c_hid_stop(struct hid_device *hid)
{
	hid->claimed = 0;
}

static int i2c_hid_open(struct hid_device *hid)
{
	struct i2c_client *client = hid->driver_data;
	struct i2c_hid *ihid = i2c_get_clientdata(client);

	set_bit(I2C_HID_STARTED, &ihid->flags);
	return 0;
}

static void i2c_hid_close(struct hid_device *hid)
{
	struct i2c_client *client = hid->driver_data;
	struct i2c_hid *ihid = i2c_get_clientdata(client);

	clear_bit(I2C_HID_STARTED, &ihid->flags);
}

static const struct hid_ll_driver i2c_hid_ll_driver = {
	.parse = i2c_hid_parse,
	.start = i2c_hid_start,
	.stop = i2c_hid_stop,
	.open = i2c_hid_open,
	.close = i2c_hid_close,
	.output_report = i2c_hid_output_report,
	.raw_request = i2c_hid_raw_request,
};

static int i2c_hid_init_irq(struct i2c_client *client)
{
	struct i2c_hid *ihid = i2c_get_clientdata(client);
	unsigned long irqflags = 0;
	int ret;

	i2c_hid_dbg(ihid, "Requesting IRQ: %d\n", client->irq);

	if (!irq_get_trigger_type(client->irq))
		irqflags = IRQF_TRIGGER_LOW;

	ret = request_threaded_irq(client->irq, NULL, i2c_hid_irq,
				   irqflags | IRQF_ONESHOT, client->name, ihid);
	if (ret < 0) {
		dev_warn(&client->dev,
			"Could not register for %s interrupt, irq = %d,"
			" ret = %d\n",
			client->name, client->irq, ret);

		return ret;
	}

	return 0;
}

static int i2c_hid_fetch_hid_descriptor(struct i2c_hid *ihid)
{
	struct i2c_client *client = ihid->client;
	struct i2c_hid_desc *hdesc = &ihid->hdesc;
	unsigned int dsize;
	int error;

	/* i2c hid fetch using a fixed descriptor size (30 bytes) */
	if (i2c_hid_get_dmi_i2c_hid_desc_override(client->name)) {
		i2c_hid_dbg(ihid, "Using a HID descriptor override\n");
		ihid->hdesc =
			*i2c_hid_get_dmi_i2c_hid_desc_override(client->name);
	} else {
		i2c_hid_dbg(ihid, "Fetching the HID descriptor\n");
		error = i2c_hid_read_register(ihid,
					      ihid->wHIDDescRegister,
					      &ihid->hdesc,
					      sizeof(ihid->hdesc));
		if (error) {
			dev_err(&ihid->client->dev,
				"failed to fetch HID descriptor: %d\n",
				error);
			return -ENODEV;
		}
	}

	/* Validate the length of HID descriptor, the 4 first bytes:
	 * bytes 0-1 -> length
	 * bytes 2-3 -> bcdVersion (has to be 1.00) */
	/* check bcdVersion == 1.0 */
	if (le16_to_cpu(hdesc->bcdVersion) != 0x0100) {
		dev_err(&ihid->client->dev,
			"unexpected HID descriptor bcdVersion (0x%04hx)\n",
			le16_to_cpu(hdesc->bcdVersion));
		return -ENODEV;
	}

	/* Descriptor length should be 30 bytes as per the specification */
	dsize = le16_to_cpu(hdesc->wHIDDescLength);
	if (dsize != sizeof(struct i2c_hid_desc)) {
		dev_err(&ihid->client->dev,
			"weird size of HID descriptor (%u)\n", dsize);
		return -ENODEV;
	}
	i2c_hid_dbg(ihid, "HID Descriptor: %*ph\n", dsize, &ihid->hdesc);
	return 0;
}

static int i2c_hid_core_power_up(struct i2c_hid *ihid)
{
	if (!ihid->ops->power_up)
		return 0;

	return ihid->ops->power_up(ihid->ops);
}

static void i2c_hid_core_power_down(struct i2c_hid *ihid)
{
	if (!ihid->ops->power_down)
		return;

	ihid->ops->power_down(ihid->ops);
}

static void i2c_hid_core_shutdown_tail(struct i2c_hid *ihid)
{
	if (!ihid->ops->shutdown_tail)
		return;

	ihid->ops->shutdown_tail(ihid->ops);
}

int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
		       u16 hid_descriptor_address, u32 quirks)
{
	int ret;
	struct i2c_hid *ihid;
	struct hid_device *hid;

	dbg_hid("HID probe called for i2c 0x%02x\n", client->addr);

	if (!client->irq) {
		dev_err(&client->dev,
			"HID over i2c has not been provided an Int IRQ\n");
		return -EINVAL;
	}

	if (client->irq < 0) {
		if (client->irq != -EPROBE_DEFER)
			dev_err(&client->dev,
				"HID over i2c doesn't have a valid IRQ\n");
		return client->irq;
	}

	ihid = devm_kzalloc(&client->dev, sizeof(*ihid), GFP_KERNEL);
	if (!ihid)
		return -ENOMEM;

	ihid->ops = ops;

	ret = i2c_hid_core_power_up(ihid);
	if (ret)
		return ret;

	i2c_set_clientdata(client, ihid);

	ihid->client = client;

	ihid->wHIDDescRegister = cpu_to_le16(hid_descriptor_address);

	init_waitqueue_head(&ihid->wait);
	mutex_init(&ihid->reset_lock);

	/* we need to allocate the command buffer without knowing the maximum
	 * size of the reports. Let's use HID_MIN_BUFFER_SIZE, then we do the
	 * real computation later. */
	ret = i2c_hid_alloc_buffers(ihid, HID_MIN_BUFFER_SIZE);
	if (ret < 0)
		goto err_powered;

	device_enable_async_suspend(&client->dev);

	/* Make sure there is something at this address */
	ret = i2c_smbus_read_byte(client);
	if (ret < 0) {
		i2c_hid_dbg(ihid, "nothing at this address: %d\n", ret);
		ret = -ENXIO;
		goto err_powered;
	}

	ret = i2c_hid_fetch_hid_descriptor(ihid);
	if (ret < 0) {
		dev_err(&client->dev,
			"Failed to fetch the HID Descriptor\n");
		goto err_powered;
	}

	ret = i2c_hid_init_irq(client);
	if (ret < 0)
		goto err_powered;

	hid = hid_allocate_device();
	if (IS_ERR(hid)) {
		ret = PTR_ERR(hid);
		goto err_irq;
	}

	ihid->hid = hid;

	hid->driver_data = client;
	hid->ll_driver = &i2c_hid_ll_driver;
	hid->dev.parent = &client->dev;
	hid->bus = BUS_I2C;
	hid->version = le16_to_cpu(ihid->hdesc.bcdVersion);
	hid->vendor = le16_to_cpu(ihid->hdesc.wVendorID);
	hid->product = le16_to_cpu(ihid->hdesc.wProductID);

	hid->initial_quirks = quirks;
	hid->initial_quirks |= i2c_hid_get_dmi_quirks(hid->vendor,
						      hid->product);

	snprintf(hid->name, sizeof(hid->name), "%s %04X:%04X",
		 client->name, (u16)hid->vendor, (u16)hid->product);
	strscpy(hid->phys, dev_name(&client->dev), sizeof(hid->phys));

	ihid->quirks = i2c_hid_lookup_quirk(hid->vendor, hid->product);

	ret = hid_add_device(hid);
	if (ret) {
		if (ret != -ENODEV)
			hid_err(client, "can't add hid device: %d\n", ret);
		goto err_mem_free;
	}

	return 0;

err_mem_free:
	hid_destroy_device(hid);

err_irq:
	free_irq(client->irq, ihid);

err_powered:
	i2c_hid_core_power_down(ihid);
	i2c_hid_free_buffers(ihid);
	return ret;
}
EXPORT_SYMBOL_GPL(i2c_hid_core_probe);

void i2c_hid_core_remove(struct i2c_client *client)
{
	struct i2c_hid *ihid = i2c_get_clientdata(client);
	struct hid_device *hid;

	hid = ihid->hid;
	hid_destroy_device(hid);

	free_irq(client->irq, ihid);

	if (ihid->bufsize)
		i2c_hid_free_buffers(ihid);

	i2c_hid_core_power_down(ihid);
}
EXPORT_SYMBOL_GPL(i2c_hid_core_remove);

void i2c_hid_core_shutdown(struct i2c_client *client)
{
	struct i2c_hid *ihid = i2c_get_clientdata(client);

	i2c_hid_set_power(ihid, I2C_HID_PWR_SLEEP);
	free_irq(client->irq, ihid);

	i2c_hid_core_shutdown_tail(ihid);
}
EXPORT_SYMBOL_GPL(i2c_hid_core_shutdown);

#ifdef CONFIG_PM_SLEEP
static int i2c_hid_core_suspend(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);
	struct i2c_hid *ihid = i2c_get_clientdata(client);
	struct hid_device *hid = ihid->hid;
	int ret;

	ret = hid_driver_suspend(hid, PMSG_SUSPEND);
	if (ret < 0)
		return ret;

	/* Save some power */
	i2c_hid_set_power(ihid, I2C_HID_PWR_SLEEP);

	disable_irq(client->irq);

	if (!device_may_wakeup(&client->dev))
		i2c_hid_core_power_down(ihid);

	return 0;
}

static int i2c_hid_core_resume(struct device *dev)
{
	int ret;
	struct i2c_client *client = to_i2c_client(dev);
	struct i2c_hid *ihid = i2c_get_clientdata(client);
	struct hid_device *hid = ihid->hid;

	if (!device_may_wakeup(&client->dev))
		i2c_hid_core_power_up(ihid);

	enable_irq(client->irq);

	/* Instead of resetting device, simply powers the device on. This
	 * solves "incomplete reports" on Raydium devices 2386:3118 and
	 * 2386:4B33 and fixes various SIS touchscreens no longer sending
	 * data after a suspend/resume.
	 *
	 * However some ALPS touchpads generate IRQ storm without reset, so
	 * let's still reset them here.
	 */
	if (ihid->quirks & I2C_HID_QUIRK_RESET_ON_RESUME)
		ret = i2c_hid_hwreset(ihid);
	else
		ret = i2c_hid_set_power(ihid, I2C_HID_PWR_ON);

	if (ret)
		return ret;

	return hid_driver_reset_resume(hid);
}
#endif

const struct dev_pm_ops i2c_hid_core_pm = {
	SET_SYSTEM_SLEEP_PM_OPS(i2c_hid_core_suspend, i2c_hid_core_resume)
};
EXPORT_SYMBOL_GPL(i2c_hid_core_pm);

MODULE_DESCRIPTION("HID over I2C core driver");
MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
MODULE_LICENSE("GPL");